한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권5호
  • /
  • Pages.525-531
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

초고장력 강판을 적용한 Cowl Cross Member의 레이저 용접 적용에 관한 연구

A Study on Laser Welding Application of the Cowl Cross Member for Ultra-High Strength Steel

  • 투고 : 2014.06.03
  • 심사 : 2014.08.26
  • 발행 : 2014.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A cowl cross is a part of the car's instrument panel used to maintain the rigidity of the vehicle body side. The application of laser welding has the benefits of speed and thermal deformation compared to arc welding. An ultra-high strength steel sheet is used to reduce the weight of the vehicle body parts. Generally, formability of such a steel sheet is poor because its elongation is very low. For this reason, a method for cold forming of an ultra-high strength steel sheet is required. This paper describes how to improve the formability and weldability of the ultra-high strength steel sheet. Mechanical tests of this material were also performed to evaluate the welding properties of $CO_2$ (GMAW) and those of laser welding.

키워드

참고문헌

  1. Choi, W. H., 2007, Development of Auto-Body Design Technology and Welding Jig for Laser Remote Welding Application, KSAE07-G0009, 62-67.
  2. Song, M. J., 2010, Laser Welding Properties of 980MPa Class High Strength Steel Sheets using Disk Laser for Car Body, KSAE10-A0491, 2772-2776.
  3. Hideyuki, 2003, Springback Simulation of Automotive Body Panel in Multi-Operation Stamping Process Using Static-Explicit FEM Code, JSAE Annual Congress 13 13-16.
  4. Lee, K. R., 2013, The Porosity Control Technology of Lap Joint Welding Using Continuous Wave Nd:YAG Laser of the Low Carbon Steel SS41, Journal of the Korean Society of Manufacturing Technology Engineers 22:4 665-672. https://doi.org/10.7735/ksmte.2013.22.4.665
  5. Kim, D. H., 2012, A Study on the Monitoring of Laser Welding for S45C Steel Sheets Using Nd:YAG Laser with Continuous Waves, Journal of the Korean Society of Manufacturing Technology Engineers 21:5 814-823. https://doi.org/10.7735/ksmte.2012.21.5.814
  6. Oh, K. M., 2006, The 3-Layer Laser Welding Method of Zinc Coated Steel for Car Body, KSAE06-W0022, 14-16.
  7. Yoo, Y. T., 2008, T-Joint Welding of Automobile Sheet Metal Using a High Power Fiber Laser, KSAE08-H0008, 47-51.