DOI QR코드

DOI QR Code

Analysis of Effects of Building Energy Consumption Characteristics on the Optimization Ratio for New and Renewable Energy Systems

건물에너지사용특성이 신재생에너지시스템 최적화 비율에 미치는 영향분석

  • Lee, Yong-Ho (School of Architectural, Civil, Environmental and Energy Engineering, Kyungpook National University) ;
  • Hong, Jun-Ho (School of Architectural, Civil, Environmental and Energy Engineering, Kyungpook National University) ;
  • Kim, Yong-Kyoung (Faculty of Energy Engineering Daegu Technical University) ;
  • Cho, Young-Hum (Department of Architecture, Yeungnam University) ;
  • Hwang, Jung-Ha (School of Architectural, Civil, Environmental and Energy Engineering, Kyungpook National University)
  • 이용호 (경북대학교 건설환경에너지공학부) ;
  • 홍준호 (경북대학교 건설환경에너지공학부) ;
  • 김용경 (대구공업대학교 건축과 에너지설비계열) ;
  • 조영흠 (영남대학교 건축학부) ;
  • 황정하 (경북대학교 건축토목공학부)
  • Received : 2014.09.18
  • Accepted : 2014.10.27
  • Published : 2014.10.30

Abstract

This study developed a KRESS program designed to find the optimization ratio for new and renewable energy systems and analyze the effects of building energy consumption characteristics on the ratio. In spite of clear differences in predicted energy consumption and energy consumption by the loads among 18 facilities, the current formula for obligatory supply ratios applies a correction coefficient according to the building purposes based on energy consumption per each unit area in medical facilities and thus reflects no energy consumption characteristics according to the building purposes. The optimization ratio for new and renewable energy systems was the same for all facilities when the correction coefficients by the building purposes and new and renewable energy sources were all applied. When the correction coefficients were not applied, however, the optimization ratio varied according to building energy consumption characteristics. The findings raise a need to test the correction coefficients in order to select new and renewable energy systems that take into account energy consumption characteristics by the building purposes and loads and reflect economy, environmental performance, and technology.

Keywords

References

  1. Hong, J. H., A Study on the Application Ratio by the New and Renewable Energy Systems Fit for Public Medical Facilities, Journal of the Korean Solar Energy Society, Vol. 34, No. 2, pp. 32-43, 2014. https://doi.org/10.7836/kses.2014.34.2.032
  2. Hong, J. H., A Study on the Development of a Proper Installation Ratio Determination Program for Each New and Renewable Energy System in Public Buildings, Architectural Institute of Korea, Spring Proceedings, Vol. 34, No. 1, pp. 256-260, 2014.
  3. Jang, H. M., Comparison and Testing of a Program to Identify the Optimal Percentage of New Renewable Energy Systems, Proceeding of the SAREK 2014, Summer Annual Conference, pp. 936-939, 2014.
  4. Lee, Y. H., A Study on the Optimization of a Renewable Energy System in Fire Station Buildings, Journal of the Korean Solar Energy Society, Vol. 33, No. 1, pp. 79-88, 2013. https://doi.org/10.7836/kses.2013.33.1.079

Cited by

  1. Reduction of Heat Generation from Junction Box in 3 kW Photovoltaic Power Generation System vol.17, pp.1, 2014, https://doi.org/10.4313/teem.2016.17.1.21