Particle and aerosol research (한국입자에어로졸학회지)

Korean Association for Particle and Aerosol Research (한국입자에어로졸학회)
권호 표지
DOI QR코드

DOI QR Code

The Experimental Study of SPM(Selectively Permeable Membrane Materials) by using Aerosol Test Instrument

에어로졸 시험장비를 이용한 방호 의복 소재의 여과 효율에 대한 연구

  • Kwon, Tae Geun (Institute of Technology, Samyang Chemical Research) ;
  • Seo, Hyeon Kwan (Institute of Technology, Samyang Chemical Research) ;
  • Kim, Jin Won (Institute of Technology, Samyang Chemical Research) ;
  • Kang, Jae Sung (Institute of Technology, Samyang Chemical Research) ;
  • Kang, Ki Tae (Department of Mechanical Engineering, Hanyang University) ;
  • Ahn, Kang Ho (Department of Mechanical Engineering, Hanyang University) ;
  • Choi, Jin Soo (National institute of environmental research) ;
  • Cho, Jae Ho (Department of Research and Development, HCT Co., LTD.) ;
  • Kwon, Yong Taek (Department of Research and Development, HCT Co., LTD.) ;
  • Park, Hyen Bae (Agency for Defense Development)
  • Received : 2014.09.12
  • Accepted : 2014.09.23
  • Published : 2014.09.30
⟨ Previous Next ⟩

Abstract

In Korea, permeable protection clothes for chemical agent is being developed and distributed. But permeable protection clothes are vulnerable for biological agent of particle type. Therefore selective permeable membranes are being developed to protect chemical agent and biological agent simultaneously. In this study, aerosol collection efficiency test was performed to validate the protection performance of permeable clothes and selective permeable membranes. Aerosol collection efficiency test was performed by using the aerosol test equipment that could test aerosol particle diameter from $0.005{\mu}m$ to $3.0{\mu}m$. This study shows the test method and performance test results for collection efficiency by using the aerosol test equipment.

Keywords

Acknowledgement

Supported by : 국방과학연구소

References

  1. E. Wilusz et al., (1998). "Advanced Material Technologies for Lightweight, Chemical/ Biological Protective Clothing", Natick Research, Development and Engineering Center
  2. TECMIPT Test Operations Procedures 8-2-501 (1997). Permeation and Penetration Testing of Airpermeable, Semipermeable, and Impermeable materials with Chemical Agents or Simulants(Swatch Testing), Test Operation Procedure 8-2-501
  3. EN1822 (2009). High efficiency air filters(HEPA and ULPA)-Part 2
  4. Hewitt,G.W. (1975). Trans.Am.Inst.Elect.Engrs.76, 300
  5. Jin Hong Ahn, (2005). "Nano-particle Size Control and Synthesis of Silicon Nano-particles by Corona Spraying Method for Nonvolatile Quantum Dot Semiconductor Memory" Hanyang University, 25
  6. S.P. Hersh et. al., (1993). "Design and Evaluation of Improved Barrier Fabrics for Protection against Toxic Aerosols and Bioogical Agents", Natick Research, Development and Engineering Center
  7. Jae Sung Kang et. al., (2013). "Research about Chemical-Biological Protection Capability of Selectively Permeable Membrane Materials Based on Polyvinyl Alcohol", Korean membrane journal, 23, pp.237-244
  8. EN1822 (2009). High efficiency air filters(HEPA and ULPA)-Part 4
  9. Jae Sung Kang et. al., (2013). "Characterization of Several Selectively Permeable Membrane Materials with Water Resistance and Protective Performance", Journal of the KIMST, 16, pp.553-559