DOI QR코드

DOI QR Code

Experimental investigations of the seismic performance of bridge piers with rounded rectangular cross-sections

  • Shao, Guangqiang (School of Civil Engineering, Central South University) ;
  • Jiang, Lizhong (School of Civil Engineering, Central South University) ;
  • Chouw, Nawawi (Department of Civil and Environmental Engineering, the University of Auckland)
  • 투고 : 2014.02.25
  • 심사 : 2014.10.08
  • 발행 : 2014.10.30

초록

Solid piers with a rounded rectangular cross-section are widely used in railway bridges for high-speed trains in China. Compared to highway bridge piers, these railway bridge piers have a larger crosssection and less steel reinforcement. Existing material models cannot accurately predict the seismic behavior of this kind of railway bridge piers. This is because only a few parameters, such as axial load, longitudinal and transverse reinforcement, are taken into account. To enable a better understanding of the seismic behavior of this type of bridge pier, a simultaneous influence of the various parameters, i.e. ratio of height to thickness, axial load to concrete compressive strength ratio and longitudinal to transverse reinforcements, on the failure characteristics, hysteresis, skeleton curves, and displacement ductility were investigated. In total, nine model piers were tested under cyclic loading. The hysteretic response obtained from the experiments is compared with that obtained from numerical studies using existing material models. The experimental data shows that the hysteresis curves have significantly pinched characteristics that are associated with small longitudinal reinforcement ratios. The displacement ductility reduces with an increase in ratio of axial load to concrete compressive strength and longitudinal reinforcement ratio. The experimental results are largely in agreement with the numerical results obtained using Chang-Mander concrete model.

키워드

과제정보

연구 과제 주관 기관 : National Engineering Laboratory

참고문헌

  1. Belarbi, A., Prakash, S. and You, Y.M. (2009), "Effect of spiral reinforcement on flexural-shear-torsional seismic behavior of reinforced concrete circular bridge columns", Struct. Eng. Mech., 33(2), 137-158. https://doi.org/10.12989/sem.2009.33.2.137
  2. Berry, M., Parrish, M. and Eberhard, M. (2004), PEER Structural Performance Database User's Manual, Pacific Earthquake Engineering Research Center, Berkeley, California, USA.
  3. Braga, F., Gigliotti, R. and Laterza, M. (2006). "Analytical stress-strain relationship for concrete confined by steel stirrups and/or FRP jackets", ASCE J. Struct. Eng., 132(9), 1402-1416. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:9(1402)
  4. Chang, G.A. and Mander, J.B. (1994), Seismic Energy Based Fatigue Damage Analysis of Bridge Columns: Part 1-Evaluation of Seismic Capacity, Report No. NCEER-94-0006, State University of New York, Buffalo, New York, USA.
  5. Chen, W.F. and Duan, L. (2003), Bridge Engineering: Seismic Design, CRC Press, Boca Raton, Florida, USA.
  6. D'Amato, M., Braga, F., Gigliotti, R., Kunnath, S. and Laterza, M. (2012), "A numerical general-purpose confinement model for non-linear analysis of R/C members", Comput. Struct., 102-103(7), 64-75. https://doi.org/10.1016/j.compstruc.2012.03.007
  7. Faria, R., Pouca, N.V. and Delgado, R. (2004), "Simulation of the cyclic behavior of R/C rectangular hollow section bridge piers via a detailed numerical model", J. Earthq. Eng., 8(5), 725-748.
  8. Filippou, F.C., Popov, E.P. and Bertero, V.V. (1983), Effects of Bond Deterioration on Hysteretic Behavior of Reinforced Concrete Joints, Report No. EERC 83-19, Earthquake Engineering Research Center, University of California at Berkeley, Berkeley,CA.
  9. Fujikura, S., Kawashima, K., Shoji, G., Zhang, J. and Takemura, H. (2000), "Effect of the interlocking ties and cross ties on the dynamic strength and ductility of rectangular reinforced concrete bridge columns", J. Struct. Mech. Earthq. Eng., 640(I-50), 71-88.
  10. Hedayat, A.S., Sloane, N.A.J. and Stufken, J. (1999), Orthogonal Arrays: Theory and Applications, Springer, New York, USA.
  11. Ji, Z.Y. (2001), The Method and Theory of Orthogonal Design, Science and Technology across the World Press, HongKong, China.
  12. Jia, H. and Dai, H. (2012), "Numeric analysis on seismic performance of RC round-ended piers with HRBF500 steel bars", Appl. Mech. Mater., 226-228, 1577-1580. https://doi.org/10.4028/www.scientific.net/AMM.226-228.1577
  13. Jia, H.M. (2008), "Seismic performance of round end pier in passenger railway", Ph.D. Dissertation, Beijing Jiaotong University, Beijing. (in Chinese).
  14. Ju, Y.Z. (2004), "Study on seismic performance of round-ended railway bridge piers with low longitudinal steel ratio", Ph. D. Dissertation, Beijing Jiaotong University, Beijing. (in Chinese)
  15. Kent, D.C. and Park, R. (1971), "Flexural members with confined concrete", ASCE J. Struct. Div., 97(7), 1969-1990.
  16. Mander, J.B, Priestley, M.J.N and Park, R. (1983), "Behaviour of ductile hollow reinforced concrete columns", Bull. NZSEE, 16(4), 273-290.
  17. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE J. Struct. Eng., 114(8), 1804-1825. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  18. Mohd Yassin, M.H. (1994), "Nonlinear analysis of prestressed concrete structures under monotonic and cycling loads", Ph.D. Dissertation, University of California, Berkeley, Berkeley.
  19. OpenSees (Open system for earthquake engineering simulation), http://opensees.berkeley.edu/.
  20. Osorio, E., Bairan, J.M. Baira'n, J.M. and Mari', A.R. (2013), "Lateral behavior of concrete under uniaxial compressive cyclic loading", Mater. Struct., 46(5), 709-724. https://doi.org/10.1617/s11527-012-9928-9
  21. PEER Structural Performance Database, http://nisee.berkeley.edu/spd/.
  22. Popovics, S. (1973), "Numerical approach to the complete stress-strain curve of concrete", Cement Concr. Res., 3(5), 583-599. https://doi.org/10.1016/0008-8846(73)90096-3
  23. Priestley, M.J.N. and Park, R. (1987), "Strength of ductility of concrete bridge columns under seismic loading", ACI Struc. J., 84(S8), 61-76.
  24. Scott, B.D., Park, R. and Priestley, M.J.N. (1982), "Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates", J. ACI, 79(2), 13-27.
  25. Sheikh, S.A. and Khoury, S.S. (1993), "Confined concrete columns with stubs", ACI Struct. J., 90(4), 414-431.
  26. Sigmund, V. and Penava, D. (2014), "Influence of openings, with and without confinement, on cyclic response of infilled R-C frames-an experimental study", J. Earthq. Eng., 18(1), 113-146. https://doi.org/10.1080/13632469.2013.817362
  27. Taucer, F.F., Spacone, E. and Filippou, F.C. (1991), A Fiber Beam-Column Element for Seismic Response Analysis of Reinforced Concrete Structures, Report No. EERC 91/17, University of California at Berkeley, Berkeley, CA.
  28. Waugh, J. (2009), "Nonlinear analysis of T-shaped concrete walls subjected to multi-directional displacements", Ph.D. Dissertation, Iowa State University, Ames, IA.
  29. Zheng, J. (2008), Railway Bridge for High Speed Trains in China, China Higher Education Press, Beijing, China. (in Chinese)

피인용 문헌

  1. Seismic damage evaluation of high-speed railway bridge components under different intensities of earthquake excitations vol.152, 2017, https://doi.org/10.1016/j.engstruct.2017.08.057
  2. Effects of friction-based fixed bearings on seismic performance of high-speed railway simply supported girder bridges and experimental validation pp.2048-4011, 2018, https://doi.org/10.1177/1369433218798120
  3. Effect of thermal regime on the seismic response of a dry bridge in a permafrost region along the Qinghai-Tibet Railway vol.13, pp.5, 2017, https://doi.org/10.12989/eas.2017.13.5.429
  4. Numerical analysis on longitudinal seismic responses of high-speed railway bridges isolated by friction pendulum bearings vol.20, pp.4, 2014, https://doi.org/10.21595/jve.2017.18557
  5. Seismic response of skewed bridges including pounding effects vol.14, pp.5, 2018, https://doi.org/10.12989/eas.2018.14.5.467
  6. Study on seismic strengthening of railway bridge pier with CFRP and concrete jackets vol.15, pp.3, 2014, https://doi.org/10.12989/eas.2018.15.3.275
  7. A Numerical Investigation on Scaling Rolling Friction Effects in Shaking Table Model Tests vol.2019, pp.None, 2014, https://doi.org/10.1155/2019/7473031
  8. Seismic Performance Evaluation of Typical Piers of China’s High-Speed Railway Bridge Line Using Pushover Analysis vol.2019, pp.None, 2014, https://doi.org/10.1155/2019/9514769
  9. Cyclic Load Tests on Precast Segmental Bridge Columns with Both Steel and Basalt FRP Reinforcement vol.23, pp.3, 2014, https://doi.org/10.1061/(asce)cc.1943-5614.0000944
  10. Experimental investigations on seismic responses of RC circular column piers in curved bridges vol.17, pp.5, 2014, https://doi.org/10.12989/eas.2019.17.5.435
  11. Seismic Damage Mechanism of CRTS-II Slab Ballastless Track Structure on High-Speed Railway Bridges vol.20, pp.1, 2014, https://doi.org/10.1142/s021945542050011x
  12. Performance Evaluation of Chinese High-Speed Railway Bridges Under Seismic Loads vol.20, pp.5, 2014, https://doi.org/10.1142/s0219455420500662
  13. Strain rate effect on dynamic response of bridge piers in high-speed railway under the earthquake loading vol.474, pp.None, 2014, https://doi.org/10.1088/1755-1315/474/7/072053
  14. Seismic damage features of high-speed railway simply supported bridge-track system under near-fault earthquake vol.23, pp.8, 2020, https://doi.org/10.1177/1369433219896166
  15. An improved equivalent energy-based design procedure for seismic isolation system of simply supported bridge in China's high-speed railway vol.134, pp.None, 2014, https://doi.org/10.1016/j.soildyn.2020.106161
  16. Seismic performance of self-centering precast segmental bridge columns under different lateral loading directions vol.221, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2020.111037
  17. Discharge coefficient estimation for rectangular side weir using GEP and GMDH methods vol.6, pp.2, 2014, https://doi.org/10.12989/acd.2021.6.2.135
  18. A Numerically Scaled Spring-Friction System and Validation by Shaking Table Test vol.21, pp.7, 2014, https://doi.org/10.1142/s0219455421500929
  19. Quasi-static testing of railway rounded rectangular hollow tall piers having semi-hinged column-base details vol.250, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2021.113403
  20. Experimental investigation on the flexural-shear performance of railway short piers vol.35, pp.None, 2014, https://doi.org/10.1016/j.istruc.2021.11.031