DOI QR코드

DOI QR Code

Energy efficiency strategy for a general real-time wireless sensor platform

  • Chen, ZhiCong (Institute of Micro-Nano devices & Solar Cells, College of Physics and Information Engineering, Fuzhou University)
  • 투고 : 2013.08.13
  • 심사 : 2013.10.20
  • 발행 : 2014.10.25

초록

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

키워드

참고문헌

  1. Arms, S.W., Townsend, C.P. et al. (2010), Energy harvesting wireless sensor networks for embeded structural health monitoring, EWSHM2010. Sorrento, Italy.
  2. Casciati, F. and Rossi, R. (2007), "A power harvester for wireless sensing applications", Struct. Control Health Monit., 14(4), 649-659. https://doi.org/10.1002/stc.179
  3. Casciati, F. and Wu, L.J. (2012), "Wireless links for global positioning system receivers", Smart Struct. Syst., 10(1), 1-14. https://doi.org/10.12989/sss.2012.10.1.001
  4. Casciati, S. and Chen, Z. (2012), "An active mass damper system for structural control using real-time wireless", Struct. Control Health Monit.,19(8), 758-767. https://doi.org/10.1002/stc.1485
  5. Casciati, S. and Chen, Z.C. (2011), "A multi-channel wireless connection system for structural health monitoring applications", Struct. Control Health Monit., 18(5), 588-600. https://doi.org/10.1002/stc.403
  6. Casciati, S., Faravelli, L. and Chen, Z. (2012), "Energy harvesting and power management of wireless sensors for structural control applications in civil engineering", Smart Struct. Syst., 10(3), 299-312. https://doi.org/10.12989/sss.2012.10.3.299
  7. Correia, L.H.A., Macedo, D.F. and dos Santos, A.L., Loureiro, A.A.F. and Nogueira, J.M.S. (2007), "Transmission power control techniques for wireless sensor networks", Comput. Netw., 51(17), 4765-4779. https://doi.org/10.1016/j.comnet.2007.07.008
  8. Correia, L.H.A. and Nogueira, J.M.S. (2008), "Transmission power control techniques for MAC protocols in wireless sensor networks", 2008 Ieee Network Operations and Management Symposium, Vols 1 and 2: 1049-1054.
  9. Jeong, J., Culler, D. and Oh, J.H. (2007), "Empirical analysis of transmission power control algorithms for wireless sensor networks", Proceedings of the 4th International Conference on Networked Sensing Systems.
  10. Kim, J. and Lynch, J.P. (2012), "Autonomous decentralized system identification by markov parameter estimation using distributed smart wireless sensor networks", J. Eng. Mech.-ASCE, 138(5), 478-490. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000359
  11. Kvaksrud, T.I. (2008), Range measurements in an open field environment, Texas Instrument Inc.
  12. Lei, Y. and Liu, L.J. (2011), "A smart wireless sensor network for structural damage detection", International Symposium on Innovation & Sustainability of Structures in Civil Engineering, Xiamen University, China.
  13. Meyer, J., Bischoff, R., Feltrin, G. and Motavalli, M. (2010), "Wireless sensor networks for long-term structural health monitoring", Smart Struct. Syst., 6(3), 263-275. https://doi.org/10.12989/sss.2010.6.3.263
  14. Lin, S., Zhang, J. et al. (2006), "ATPC: Adaptive transmission power control for wireless sensor networks", Proceedings of the 4th ACM Conference on Embedded Networked Sensor Systems Boulder, Colorado, USA.
  15. Seem, C. (2007), Programming Output Power on CC243x, Texas Instrument Inc.
  16. Spencer, B.F. and Yun, C.B. (2010), Wireless sensor advances and applications for civil infrastructure monitoring, Newmark Structural Engineering Laboratory Report Series 024.
  17. Swartz, R.A., Lynch, J.P., Zerbst, S., Sweetman, B. and Rolfes, R. (2010), "Structural monitoring of wind turbines using wireless sensor networks", Smart Struct. Syst., 6(3), 183-196. https://doi.org/10.12989/sss.2010.6.3.183
  18. Texas Instrument Inc. CC2430 datasheet, www.ti.com.
  19. Torfs, T., Sterken, T., Brebels, S., Santana, J., van den Hoven, R., Spiering, V., Bertsch, N., Trapani, D. and Zonta, D. (2013), "Low power wireless sensor network for building monitoring", IEEE Sens. J., 13(3), 909-915. https://doi.org/10.1109/JSEN.2012.2218680

피인용 문헌

  1. Frequency-selective surface-based chipless passive RFID sensor for detecting damage location vol.24, pp.12, 2017, https://doi.org/10.1002/stc.2028
  2. A Wireless Sensor Network Using GNSS Receivers for a Short-Term Assessment of the Modal Properties of the Neckartal Bridge vol.7, pp.6, 2017, https://doi.org/10.3390/app7060626
  3. Design of a wireless vibration metre for conductor vibration monitoring 2018, https://doi.org/10.1002/stc.2143
  4. Proof of concept of wireless TERS monitoring vol.24, pp.12, 2017, https://doi.org/10.1002/stc.2026
  5. Wireless structural control using stochastic bandwidth allocation and dynamic state estimation with measurement fusion vol.25, pp.2, 2018, https://doi.org/10.1002/stc.2104
  6. A state estimation method for wireless structural control systems vol.24, pp.6, 2017, https://doi.org/10.1002/stc.1929
  7. Wireless structural control using multi-step TDMA communication patterning bandwidth allocation vol.24, pp.12, 2017, https://doi.org/10.1002/stc.2025
  8. On-board data synchronization in wireless structural health monitoring systems based on phase locking vol.25, pp.11, 2018, https://doi.org/10.1002/stc.2248
  9. Ad-hoc vibration monitoring system for a stress-ribbon footbridge: from design to operation vol.22, pp.1, 2014, https://doi.org/10.12989/sss.2018.22.1.013