DOI QR코드

DOI QR Code

The Effect of Load Variation on the Performance of an Injection Heat Pump with an Economizer

이코너마이저 적용 열펌프 시스템의 부하변화에 따른 성능 특성 연구

  • 최종민 (국립 한밭대학교 기계공학과) ;
  • 박용정 ((주)대한공조 기술연구소) ;
  • 강신형 (건양대학교 기계공학과)
  • Received : 2014.06.03
  • Accepted : 2014.07.03
  • Published : 2014.09.01

Abstract

Heat pumps have received a fair amount of attention all over the world for their high efficiency and low environmental impact. Employing heat pumps for residential heating and cooling produces only about 2038 kg-$CO_2$/year, an amount which is less than half that of conventional boiler systems. However, the use of single-stage heat pumps becomes uneconomical when they are operated at very low evaporating temperature or high condensing temperature. Two-stage heat pumps systems can be used successfully for low or high temperature applications. In this paper, the experimental study on the performance of two-stage heat pump with an economizer was executed in heating mode. When the secondary fluid inlet temperature to the indoor heat exchanger increased, the COP enhancement rate of two-stage heat pump with an economizer was increased. For all outdoor inlet temperature conditions, the performance of the heat pump with an economizer was higher than it without an economizer.

Keywords

References

  1. Esen, H., Inalli, M., Sengur, A., and Esen, M., 2008, Modelling a ground-coupled heat pump system using adaptive neuro-fuzzy inference systems, International Journal of Refrigeration, Vol. 31, pp. 65-74. https://doi.org/10.1016/j.ijrefrig.2007.06.007
  2. Roh, C.W., Yoo, J.W., and Kim M.S., 2014, Vapor refrigerant injection techniques for heat pump system: The latest literature review and discussion, International Journal of Air-Conditioning Refrigeration, Vol. 22, 1430002. https://doi.org/10.1142/S201013251430002X
  3. Banasiaka, K., Hafnerb, A., and Andresenb, T., 2012, Experimental and numerical investigation of the influence of the two-phase ejector geometry on the performance of the R744 heat pump, International Journal of Refrigeration, Vol. 35, pp. 1617-1625. https://doi.org/10.1016/j.ijrefrig.2012.04.012
  4. Aikins, K. A., Lee, S., and Choi, J.M., 2013, Technology review of two-stage vapor compression heat pump system, International Journal of Air-Conditioning Refrigeration, Vol. 21, 1330002. https://doi.org/10.1142/S2010132513300024
  5. Cao, F., Wang, K., Wang, S., Xing, Z., and Shu, P., 2009. Investigation of the heat pump water heater using economizer vapor injection system and mixture of R22/ R600a. International Journal of Refrigeration, Vol. 32, pp. 509-514. https://doi.org/10.1016/j.ijrefrig.2008.06.012
  6. Xu, S. and Ma, G. Y., 2011. Research on air-source heat pump coupled with economized vapor injection scroll compressor and ejector. International Journal of Refrigeration, Vol., 34, pp. 1587-1595. https://doi.org/10.1016/j.ijrefrig.2010.06.003
  7. Roh, C. W. and Kim, M. S., 2011. Comparison of the heating performance of an inverterdriven heat pump system using R410A vapourinjection into accumulator and compressor. International Journal of Refrigeration, Vol. 35, pp. 434-444.
  8. Zehnder, M., Favrat, D., Hohl, H., Olivier, C., and Perevozchikov, M., 2002. High performance air-water heat pump with extended application range for residential heating. IEA 7th Heat Pump Conference, Beijing, China.
  9. Turunen-Saaresti, T., Roytta, P., Honkatukia, J., Backman, J., 2010. Predicting off-design range and performance of refrigeration cycle with two-stage centrifugal compressor and flash intercooler. International Journal of Refrigeration, Vol. 33, pp. 1152-1160. https://doi.org/10.1016/j.ijrefrig.2010.04.008
  10. International Standard, 1998. ISO 13256-2: Water-source heat pumps-Testing and rating for performance Part 2 Water-to-water and brine-to-water heat pumps.
  11. KEMCO, 2008. NR GT 101: Water-to-water ground source heat pump, NRGT, Yongin, The Republic of Korea.