참고문헌
- Y. W. Park and H. Cho, The Situation of Continuous Low-temperature Plasma Treatment Technology, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 10(2), 55(1998).
- H. Cho and K. Koo, Effects of Color Depth on Wool and Silk Fabrics Treated Sputter Etching, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 6(3), 44(1994).
- J. Friedrich, I. Loeschche, H. Frommelt, H. Reiner, H. Zimmermann, and P. Lutgen, Ageing and Degradation of Poly(ethylene terephthalate) in an Oxygen Plasma, Polymer Degrad Stability, 31(1), 97(1991). https://doi.org/10.1016/0141-3910(91)90099-D
- S. Yumitori, Correlation of C 1s Chemical State Intensitied with the O 2s Intensity in the XPS Analysis of Anodically Oxidized Glass-like Carbon Samples, J. of Materials Science, 35(1), 139(2000). https://doi.org/10.1023/A:1004761103919
- P. H. Bae and J. Jo, Preliminary Study on Desizing and Dyeing Using Low Temperature Plasma, J. KSEE, 27(9), 946(2005).
- K. Koo, T. Wakida, C. I. Sul, and C. Hwan, Surface Characterstics of Sputter Etched Poly (ethylene terephthalate) and Nylon 6 Films, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 3(2), 25(1991).
- Y. A. Kwon, Wettabillity and Water Repellency of Polyester Fabrics treated by Low Temperature Plasma, J. Korean Society Clothing and Textiles, 19(2), 320(1995).
- B. Park and K. Koo, Properties of Silicone-coated Fabric for Membrane treated by Oxygen Low Temperature Plasma, Textile Coloration and Finishing (J. of Korea Soc. Dyers and Finishers), 23(3), 195(2011). https://doi.org/10.5764/TCF.2011.23.3.195
- K. M. Cho and J. H. Lee, Improvement of Printing Properties of PET Micro Filament Fabrics Using Low Temperature Plasma Technology, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 7(1), 1(1995).
- L. H. Zhao, J. Lee, and P. N. Sen, Long-term Retention of Hydrophilic Behavior of Plasma treated Polydimethylsiloxane(PDMS) Surfaces Stored under Water and Luria-Bertani Broth, Sensors and Actuators A: Physical, 181, 33(2012). https://doi.org/10.1016/j.sna.2012.04.038
- T. J. Horr, J. Ralston, and R. S. C. Smart, The Use of Contact Angle Measurements to Quantify the Adsorption Density and Thickness of Organic Molecules on Hydrophilic Surfaces, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 97(3), 183(1995). https://doi.org/10.1016/0927-7757(95)03090-Z
- Y. Y. Ji and S. S. Kim, Plasma Surface Treatment of Nylon 6 Fiber for the Improvement of Water Repellency by Low Pressure RF Plasma Discharge Processing, Polymer(Korea), 31(1), 31(2007).
- J. D. Choe, Study of Pre-treatment Technology on DTP by In-line Atmospheric Plasma, M.S. Thesis, Yeungnam University, 2008.
- S. Wu, "Polymer Interface and Adhesion", Marcel Dekker INC., New York, pp.1-160, 1982.
- C. Tendero, C. Tixier, P. Tristant, J. Desmaison, and P. Leprince, Atmospheric Pressure Plasmas: A Review, Spectrochimica Acta Part B: Atomic Spectroscopy, 61(1), 2(2006). https://doi.org/10.1016/j.sab.2005.10.003
피인용 문헌
- Development of moisture transition ability on porous complex structured woven fabric with convergence of pattern, porosity, and plasma technology vol.17, pp.12, 2016, https://doi.org/10.1007/s12221-016-6724-0