Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지
DOI QR코드

DOI QR Code

The Physicochemical Characteristics of PET Fabrics Treated with Low Temperature Glow Plasma and Atmospheric Corona Discharge

진공 저온 플라즈마와 대기압 코로나 방전가공 PET 직물의 물리화학적 특성

  • Ma, Jaehyuk (Department of Advanced Fibro Science, Kyoto Institute of Technology) ;
  • Yang, Jinyoung (Department of Textile Engineering and Technology, Yeungnam University) ;
  • Koo, Kang (S-WIN Co., Ltd.) ;
  • Yang, Hyun A (Department of Clothing and Fashion, Yeungnam University) ;
  • Park, Youngmi (Department of Clothing and Fashion, Yeungnam University)
  • Received : 2014.07.28
  • Accepted : 2014.09.15
  • Published : 2014.09.27
Download PDF
⟨ Previous Next ⟩

Abstract

The high value-added functionality for synthetic fiber can be considered through a plasma enhanced treatment. In this study, PET(Polyethyleneterephthalate) was treated with a glow plasma and corona treatment. Surface characteristics of treated fabric were investigated using electron scanning microscopy(SEM), contact angle, X-ray photoelectron spectroscopy(XPS), tensile and adhesion strength. It was found that the contact angle showed $85.5^{\circ}$ for untreated fabric, $0^{\circ}$ for plasma and corona treatment at the condition of 200W for 7min. By XPS analysis, atomic ratio of O 1s/C 1s was increased from 0.27 to 0.43 by glow plasma and 0.27 to 0.41 by corona treatment at 200W for 7min, respectively. Glow plasma and corona treatment did not significantly change the tensile strength of PET fabric. Adhesion strength showed a substantial enhancement for the surface treated with the glow plasma, while corona treatment was adversely affected.

Keywords

References

  1. Y. W. Park and H. Cho, The Situation of Continuous Low-temperature Plasma Treatment Technology, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 10(2), 55(1998).
  2. H. Cho and K. Koo, Effects of Color Depth on Wool and Silk Fabrics Treated Sputter Etching, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 6(3), 44(1994).
  3. J. Friedrich, I. Loeschche, H. Frommelt, H. Reiner, H. Zimmermann, and P. Lutgen, Ageing and Degradation of Poly(ethylene terephthalate) in an Oxygen Plasma, Polymer Degrad Stability, 31(1), 97(1991). https://doi.org/10.1016/0141-3910(91)90099-D
  4. S. Yumitori, Correlation of C 1s Chemical State Intensitied with the O 2s Intensity in the XPS Analysis of Anodically Oxidized Glass-like Carbon Samples, J. of Materials Science, 35(1), 139(2000). https://doi.org/10.1023/A:1004761103919
  5. P. H. Bae and J. Jo, Preliminary Study on Desizing and Dyeing Using Low Temperature Plasma, J. KSEE, 27(9), 946(2005).
  6. K. Koo, T. Wakida, C. I. Sul, and C. Hwan, Surface Characterstics of Sputter Etched Poly (ethylene terephthalate) and Nylon 6 Films, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 3(2), 25(1991).
  7. Y. A. Kwon, Wettabillity and Water Repellency of Polyester Fabrics treated by Low Temperature Plasma, J. Korean Society Clothing and Textiles, 19(2), 320(1995).
  8. B. Park and K. Koo, Properties of Silicone-coated Fabric for Membrane treated by Oxygen Low Temperature Plasma, Textile Coloration and Finishing (J. of Korea Soc. Dyers and Finishers), 23(3), 195(2011). https://doi.org/10.5764/TCF.2011.23.3.195
  9. K. M. Cho and J. H. Lee, Improvement of Printing Properties of PET Micro Filament Fabrics Using Low Temperature Plasma Technology, Textile Coloration and Finishing(J. of Korea Soc. Dyers and Finishers), 7(1), 1(1995).
  10. L. H. Zhao, J. Lee, and P. N. Sen, Long-term Retention of Hydrophilic Behavior of Plasma treated Polydimethylsiloxane(PDMS) Surfaces Stored under Water and Luria-Bertani Broth, Sensors and Actuators A: Physical, 181, 33(2012). https://doi.org/10.1016/j.sna.2012.04.038
  11. T. J. Horr, J. Ralston, and R. S. C. Smart, The Use of Contact Angle Measurements to Quantify the Adsorption Density and Thickness of Organic Molecules on Hydrophilic Surfaces, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 97(3), 183(1995). https://doi.org/10.1016/0927-7757(95)03090-Z
  12. Y. Y. Ji and S. S. Kim, Plasma Surface Treatment of Nylon 6 Fiber for the Improvement of Water Repellency by Low Pressure RF Plasma Discharge Processing, Polymer(Korea), 31(1), 31(2007).
  13. J. D. Choe, Study of Pre-treatment Technology on DTP by In-line Atmospheric Plasma, M.S. Thesis, Yeungnam University, 2008.
  14. S. Wu, "Polymer Interface and Adhesion", Marcel Dekker INC., New York, pp.1-160, 1982.
  15. C. Tendero, C. Tixier, P. Tristant, J. Desmaison, and P. Leprince, Atmospheric Pressure Plasmas: A Review, Spectrochimica Acta Part B: Atomic Spectroscopy, 61(1), 2(2006). https://doi.org/10.1016/j.sab.2005.10.003

Cited by

  1. Development of moisture transition ability on porous complex structured woven fabric with convergence of pattern, porosity, and plasma technology vol.17, pp.12, 2016, https://doi.org/10.1007/s12221-016-6724-0