DOI QR코드

DOI QR Code

Mathematical Analysis of LLC Series Resonant Converter with Current Doubler Rectifier using Coupled Inductor

Coupled Inductor를 활용한 배전류 정류 회로를 적용한 LLC 직렬 공진 컨버터의 수식화 해석

  • Shin, Jung-Yoon (Dept. of Control & Instrumentation Engineering, Korea Nat'l Univ of Transportation) ;
  • Hwang, Soon-Sang (Power Research Lab. DongAh Elecomm) ;
  • Yoon, Byung-Chul (Power Research Lab. DongAh Elecomm) ;
  • Kim, Hag-Wone (Dept. of Control & Instrumentation Engineering, Korea Nat'l Univ of Transportation) ;
  • Cho, Kwan-Yuhl (Dept. of Control & Instrumentation Engineering, Korea Nat'l Univ of Transportation)
  • Received : 2014.03.10
  • Accepted : 2014.08.28
  • Published : 2014.10.20

Abstract

This study proposes an LLC series resonant converter with a current doubler using a coupled inductor as a rectification circuit for the secondary side. The current doubler circuit is generally used for a high-voltage input and low-voltage output circuit to obtain high efficiency with small transformer turn ratio. However, an inductive circuit is not generally used in the secondary side of an LLC series resonant converter. If inductive components exist on the secondary side, the resonant characteristics are changed through the secondary inductive circuit. Mathematical analysis shows that the secondary-side current doubler with coupled inductor is not affected by the resonant characteristic of the primary LLC if leakage inductance occurs in the coupled inductor. Results of the analysis are proven by simulation; an experiment is also conducted for the proposed circuit.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. B. Yang, "Topology investigation for front end DC/DC power conversion for distributed power system," Blacksburg, Virginia, Sep. 2003.
  2. H. S. Choi, "Design consideration of half-bridge LLC resonant converter," Journal of Power Electronics, Vol. 7, No. 1, pp. 13-20, Jan. 2007.
  3. S. I. Kang, K. H. Yoon, E. S. Kim, J. H. Park, and D. Y. Huh, "Operating characteristics of LLC series resonant converter," The Transactions of the KIPE, Vol. 12, No. 6, pp. 472-482, Dec. 2007.
  4. H. I. Son, C. S. Kim, and D. N. Kim, "A study on LLC resonant converter using the planar transformer for the LED backlight of slim-type LCD TV," The Transactions of the KIPE, Vol. 15, No. 4, pp. 319-326, Aug. 2010. https://doi.org/10.6113/TKPE.2010.15.4.319
  5. B. C. So, K. B. Seo, D. H. Lee, H. C. Jung, S. S. Hwang, H. W. Kim, K. Y. Cho, and B. K. Lim, "Design of LLC resonant converter having enhanced load range for communication power," The Transactions of the KIPE, Vol. 17, No. 5, pp. 461-469, Oct. 2012. https://doi.org/10.6113/TKPE.2012.17.5.461
  6. B. A, Gusev, V. I, Meleshin, D. A. Ovchinnikov, "Transformer core unbalancing issue in a full-bridge DC-DC converter with current doubler rectifier," Proceedings of Power Electronics, Drives and Energy System Conference PEDES 2006, pp. 1-6, Dec. 2006.
  7. I. O. Lee, "Analysis and design of a three-level LLC series resonant converter for high-and wide-input-voltage applications," IEEE Trans. on Power Electronics, Vol. 27, No. 6, Jun. 2012.
  8. B. C. Kim, K. B. Park, C. E. Kim, and G. W. Moon, "Load sharing characteristics of two-phase interleaved LLC resonant converter with parallel and series input structure," Proceedings of ECCE 2009, pp. 750-753, Sep. 2009.
  9. B. C. So, Y. S. Jin, H. W. Kim, K. Y. Cho, B. K. Lim, and H. S. Mok, "An interleaved full bridge bidirectional DC-DC converter for battery cycler with high voltage conversion ratio," Proceedings of Autumn Conference of KIPE 2011, pp. 195-196, Nov. 2011.
  10. R. P. Torico-Bascope, G. V, Torrico-Bascope, C. G. C, Branco, D. S. Oliveira, F. L. M. Antunes, "A new current-doubler rectifier based on three-state switching cell for buck derived DC-DC converters," Proceedings of Power Electronics Specialists Conference PESC 2008, pp. 2492-2497, Jun. 2008.
  11. D. W. Jung, S. S. Hwang, H. W. Kim, and K. Y. Cho, "LLC resonant converter with multi-input transformer and current doubler rectifier," Proceedings of Industrial Technology Section of Annual Conference of the KIPE, pp. 101-102, Jul. 2013.
  12. J. Y. Bae, et al, "A study on the secondary rectification methods for the three level converter," JEET, Vol. 2, No. 1, pp. 81-88, 2007.
  13. J. Y. Shin, H. W. Kim, K. Y. Cho, and S. S. Hwang, D. W. Jung, "LLC resonant converter mathematacal analysis with current-doubler rectifier," Proceedings of the Annual Autumn Conference of the KIPE, pp. 97-98, Nov. 2013.