DOI QR코드

DOI QR Code

A Development of the Operating Speed Estimation Model of Truck on Four-lane Rural Highway

지방부 일반국도 4차로의 화물차 주행속도 예측모형 개발

  • 박민호 (한국건설기술연구원 도로교통연구실) ;
  • 이근희 (한국건설기술연구원 도로교통연구실)
  • Received : 2014.08.08
  • Accepted : 2014.10.01
  • Published : 2014.10.16

Abstract

PURPOSES : The purpose of the study is to a) explore the operating speed of trucks on rural highways affected by road geometry, and thereby b) develop a predictive model for the operating speed of trucks on rural highways. METHODS : Considering that most of the existing studies have focused on cars, the current study aimed to predict the operating speed of trucks by conducting linear regression analysis on the speed data of trucks operating on the linear-curved-linear portions of the road as a single set. RESULTS : The operating speed in the plane curve portion increased with the length of the curve, and decreased with a lower vertical grade and a smaller curve radius. In the straight plane portion, the operating speed increased with a larger curve radius(upstream), and decreased with an increase in the change of the vertical grade, depending on the length of the vertical curve. CONCLUSIONS : This study developed estimation models of truck for operational speed and evaluated the degree of safety for horizontal and vertical alignments simultaneous. In order to represent whole area of the rural highway, the models should be ew-analyzed with vast data related with road alignment factor in the near future.

Keywords

References

  1. Al-Masaeid, H. R., M. Hamed, M. Abou-Ela, and A. Ghannam(1995), "Consistency of Horizontal Alignment for Different Vehicle Classes", Transportation Research Record 1500, Transportation Research Board, National Research Council, Washington, D.C., pp.178-183.
  2. American Association of State Highway and Transportation Officials(2001), A Policy on Geometric Design of Highways and Streets.
  3. Barnett, J.(1997), "Safe Friction Factors and Superelevation Design, "In Gutierrez, N. I., "A Model for Estimating Operating Speeds on Combined Horizontal and Vertical Alignments on Rural Two-Lane Highways, "Ph. D. Thesis of Texas A&M University.
  4. Choi, Jaisung, Lee, Jong-hak, et. al. 2013. Acceleration and Deceleration Profile Development of Reflecting Road Design Consistency, International Journal of Highway Engineering, Vol. 15, No. 6. 95-103.
  5. Crosstown Associates(2001), "Correlation of Accidnet Rates and Highway Geometric Features, "in:Ezra Hauer, "Road Grade and Safety, "Review of Literature for the Interactive Highway Safety Design Model.
  6. Fitzpartick & J.M.Collins(1999), "Speed ProfileModel for Two-Lane Rural Highway, "TRR 1737, Transportation Research Board, National Research Council, Washington, DC, pp.7-15.
  7. Fitzpatrick, 외10인(2000), "Speed Prediction for Two-Lane Rural Highway, "Report FHWA-RD-99-171, USDOT, FHWA.
  8. Fitzpatrick K. 외 4인 (2001), "Design Factors that Affect Driver Speed on Suburban Streets", TRB, Washington, D.C.
  9. Fitzpatrick K. 외 4인 (2003), "Exploration of the Relationships Between Operating Speed and Roadway Features", TRB, Washington, D.C..
  10. Hong, dahee, et. al. 2005. development of predicting models for operating speed considering of traffic operating characters and road alignment factors in express highways, master's degree at University of Seoul.
  11. Islam, M.N., and Seneviratne, P.N.(1994), "Evaluation of Design Consistency of Two-Lane Rural Highways, "ITE Journal, February.
  12. Kim, Dongsoo, Park, J., 1999. Causes of rutting and deformation, International Journal of Highway Engineering, Vol. 3. 332-339.
  13. Kim, Jangook, et. al. 2009. Development of Predicting Models of the Operating Speed and Operating environment
  14. Lamm, R. 와 2인 (1993a), "Safety Module for Highway Design, " unpublished manuscript, Institute for Highway and Railroad Engineering, University of Karlsruhe, Germany.
  15. Lee, Jong-hak, 2013. Evaluation of Horizontal Alignment Alternatives Based on Levels of the Greenhouse Gases, University of Seoul.
  16. McLean, J.R., (1978), "Speeds on Curves: Regression Analysis, " International Report 2003, Australian Road Research Board, Melbourne, Austraia.
  17. McLean, J.R., (1981), "Driver Speed Behaviour and Rural Road Alignment Design, "Traffic Engineering&Control, Vol.22, Printerhall Limited, London, England, pp.208-211.
  18. Park, Daehwan, 1996. Asphalt concrete and curing: Factors to consider. Page 29 in Proc. of 18th Conference of Korean Society of Road Engineers, Seoul, Korea.
  19. P. E. Rapp, T. R. Bashore, J. M. Martinerie, A. M. Albano, I. D. Zimmerman and A. I. Mees.(1989), "Dynamics of Brain Electrical Activity." , Brain Topography, 2, 1&2, pp.99-118. https://doi.org/10.1007/BF01128848
  20. R. A. Krammes et al(1995), "Horizontal Alignment Design Consistency for Rural Two-lane Highways, RD-94-034, FHWA.
  21. Satisfaction Model in Expressways, International Journal of Korea society of Transportation, Vol. 27, No. 2. 117-131.
  22. Smith, D.R., Taylor, W., 2000. Speed and Accidents. Vol. I., Speed Observation and Management. 15th ed. Korea Road & Transportation Association, Seoul, Korea.