References
- Fukano T, Kodama Y, Senoo Y., 1977. "Noise Generated by Low Pressure Axial Flow Fans, I: Modeling of the Turbulence Noise", Journal of Sound and Vibration Vol. 50, No. 1, pp. 63-74, 1977. https://doi.org/10.1016/0022-460X(77)90551-X
- Fukano T, Kodama Y, Senoo Y., "Noise Generated by Low Pressure Axial Flow Fans, II: Effect of Number of Blade, Chordlength and Camber of Blades", Journal of Sound and Vibration Vol. 50, No. 1, pp. 75-88, 1977. https://doi.org/10.1016/0022-460X(77)90552-1
- Fukano T, Kodama Y, Senoo Y., "Noise Generated by Low Pressure Axial Flow Fans, III: Effect of Rotational Freguency, Blade Thickness and Outer Blade Profile", Journal of Sound and Vibration Vol. 56, No. 2, pp. 261-277, 1978. https://doi.org/10.1016/S0022-460X(78)80020-0
- Kamaya S., Kanabayashi S., 1990. "A Study on Noise Reduction for Small Axial Flow Fans", JSME(B), Vol. 56, No. 531, 204-208, 1990.
- Estevadeordal J., Gogineni S., Copenhaver W., Bloch G., Brendel M., "Flow field in a low-speed axial fan: a DPIV investigation", Experimental Thermal and Fluid Science, Vol. 23, Issues 1-2, pp. 11-21, 2000. https://doi.org/10.1016/S0894-1777(00)00027-3
- Lee G.H., Bake J. H., Myung H. J., "Structure of Tip Leakage Flow in a Forward-swept Axial-flow Fan", Journal of Flow Turbul Combust, Vol. 70, pp. 241-65, 2003. https://doi.org/10.1023/B:APPL.0000004936.88816.ee
- Maaloum A., Kouidri S., Bakir F., Rey R., "Effect of Inlet Duct Contour and Lack Thereof on the Noise Generated of an Axial Flow Fan", Applied Acoustics, Vol. 64, Issue 10, pp. 999-1010, 2003, https://doi.org/10.1016/S0003-682X(03)00045-8
- Cho, J. S. and Han, S. H., "Analysis of the Sir Flow due to the Number of Electric Fan Blades", Journal of the KSMPE, Vol. 11, No. 1, pp. 107-112, 2012.
- Ryu, K. J., Kim, Y. Y., Lee, K. S. and Cha, W. H.,"Optimization of Shroud Shape and Fan Location for Increasing Exhaust Flow Rate of Air Conditioner Outdoor Unit", Transactions of the SAREK, Vol. 21, No. 11, pp. 599-605, 2009.
- Cho, J. U. and Han, M. S., "Study on Flow and Stress Analysis of Gas Turbine Blade", Journal of the KSMPE, Vol. 10, No. 3, pp. 67-72, 2011.
- Kim, J. Y. and Yang, S. H., "Numerical andExperimental Analysis of Tunnel Flow Induced by Jet Fan", Transactions of the KFMA, Vol. 13, No. 3, pp. 59-64, 2010.
Cited by
- 트랙트용 미드 모어의 공기 유동 특성에 관한 연구(I) vol.14, pp.3, 2014, https://doi.org/10.14775/ksmpe.2015.14.3.027
- 극저온용 2단 임펠러 액중펌프 역설계에 관한 연구 vol.16, pp.3, 2017, https://doi.org/10.14775/ksmpe.2017.16.3.009
- 자동차에서의 공기의 유입구에 따른 유동해석에 관한 융합 고찰 vol.11, pp.5, 2020, https://doi.org/10.15207/jkcs.2020.11.5.159
- Air Flow Analysis on Driving Truck with or without Side Pairing vol.19, pp.5, 2014, https://doi.org/10.14775/ksmpe.2020.19.05.014
- A Study on the Efficient Flow Analysis due to Valve Shape vol.19, pp.6, 2014, https://doi.org/10.14775/ksmpe.2020.19.06.017
- 항공기의 형상에 따른 표면에서의 유동해석에 관한 융합 연구 vol.11, pp.7, 2020, https://doi.org/10.15207/jkcs.2020.11.7.151
- 윈드 디플렉터 형상에 따른 트레일러 주위의 유동해석에 관한 융합 연구 vol.11, pp.8, 2020, https://doi.org/10.15207/jkcs.2020.11.8.159
- Flow Analysis due to the Slant Angle of a Windscreen at the Front of a Car Body vol.19, pp.9, 2014, https://doi.org/10.14775/ksmpe.2020.19.09.009
- Analysis of Airflow due to the Configuration of Automotive Diffuser vol.19, pp.11, 2014, https://doi.org/10.14775/ksmpe.2020.19.11.016