DOI QR코드

DOI QR Code

Effect of the type of sand on the fracture and mechanical properties of sand concrete

  • 투고 : 2014.01.05
  • 심사 : 2014.03.06
  • 발행 : 2014.03.25

초록

The principal objective of this study is to deepen the characterization studies already led on sand concretes in previous works. Indeed, it consists in studying the effect of the sand type on the main properties of sand concrete: fracture and mechanical properties. We particularly insist on the determination of the fracture characteristics of this material which apparently have not been studied. To carry out this study, four different types of sand have been used: dune sand (DS), river sand (RS), crushed sand (CS) and river-dune sand (RDS). These sands differ in mineralogical nature, grain shape, angularity, particle size, proportion of fine elements, etc. The obtained results show that the particle size distribution of sand has marked its influence in all the studied properties of sand concrete since the sand having the highest diameter and the best particle size distribution has given the best fracture and mechanical properties. The grain shape, the angularity and the nature of sand have also marked their influence: thanks to its angularity and its limestone nature, crushed sand yielded good results compared to river and dune sands which are characterized by rounded shape and siliceous nature. Finally, it should further be noted that the sand concrete presents values of fracture and mechanical properties slightly lower than those of ordinary concrete. Compared to mortar, although the mechanical strength is lower, the fracture parameters are almost comparable. In all cases, the sand grains are debonded from the paste cement during the fracture which means that the crack goes through the paste-aggregate interface.

키워드

참고문헌

  1. Abdullahi, M. (2012), "Effect of aggregate type on Compressive strength of concrete International Journal of Civil and Structural Engineering, 3(2),782 -791.
  2. Aquino, C., Masumi, I., Hiroaki, M., Maki, M. and Takahisa, O. (2010), "The effects of limestone aggregate on concrete properties", Constr Build Mater, 24(12), 2363-2368. https://doi.org/10.1016/j.conbuildmat.2010.05.008
  3. Bederina, M., Khenfer, M.M., Dheilly, R.M. and Queneudec, M. (2005), "Reuse of local sand: effect of lime stone filler proportion on the rheological and mechanical properties of different sand concrete", Cement Concrete Res., 35(6), 1172-1179. https://doi.org/10.1016/j.cemconres.2004.07.006
  4. Bederina, M., Marmoret, L. Mezreb, K., Khenfer, M.M., Bali, A. and Queneudec, M. (2007), "Effect of the of the addition of wood shavings on the thermal conductivity of the sand concretes - experimental study and modelling", Constr. Build. Mater., 2, 662-668.
  5. Bederina, M., Gotteicha, M., Belhadj, B., Dheily, R.M., Khenfer, M.M. and Queneudec, M. (2012), "Drying shrinkage studies of wood sand concrete - Effect of different wood treatments", Constr. Build. Mater., 36, 1066-1075. https://doi.org/10.1016/j.conbuildmat.2012.06.010
  6. Bouziani, T., Bederina, M., Hadjoudja, M. (2012), "Effect of dune sand on the properties of flowing sandconcrete (FSC)", Int. J. Concrete Struct. Mater., 6(1), 59-64. https://doi.org/10.1007/s40069-012-0006-z
  7. Chuang, T.J., Rudnicki, J. and Multiscale, W. (2001), "Deformation and Fracture in Materials and Structures", The James R. Rice, 60th anniversary volume.
  8. Elices, M. and Rocco, C.G. (2008), "Effect of aggregate size on the fracture and mechanical properties of a simple concrete", Eng. Fract. Mech., 75, 3839-3851. https://doi.org/10.1016/j.engfracmech.2008.02.011
  9. Kaplan, M.F. (1961), "Crack propagation and fracture of concrete", J. Am. Concrete Inst., 58(11), 591-610.
  10. Kilic, A., Atis, C.D., Teymen, A., Karahan, O., zcan, F.O ., Bilim, C. and zdemir, M.O. (2008), "The influence of aggregate type on the strength and abrasion resistance of high strength concrete", Cement Concrete Compos., 30(4), 290-296. https://doi.org/10.1016/j.cemconcomp.2007.05.011
  11. Makhloufi, Z., Kadri, E.H., Bouhicha, M. and Benaissa, A. (2012), "Resistance of limestone mortars with quaternary binders to sulfuric acid solution", Constr. Build. Mater., 721, 26, 497-504.
  12. Neville, A.M. (2012), Properties of concrete, 5th edition, 824.
  13. RagipInce (2010), "Determination of concrete fracture parameters based on two-parameter and size effect models using split-tension cubes", Eng. Fract. Mech., 77, 2233-2250. https://doi.org/10.1016/j.engfracmech.2010.05.007
  14. Reis, J.M.L. (2012), "Sisal fiber polymer mortar composites: Introductory fracture mechanics approach", Constr. Build. Mater., 37, 177-180. https://doi.org/10.1016/j.conbuildmat.2012.07.088
  15. RILEM 50-FMC Recommendation. (1985), "Determination of fracture energy of mortar and concrete by means of three-point bend test on notched beams", Mater. Struct., 18, 285-290. https://doi.org/10.1007/BF02472917
  16. Rocco, C.G. and Elices, M. (2009), "Effect of aggregate shape on the mechanical properties of a simple concrete", Eng. Fract. Mech., 76, 286-298. https://doi.org/10.1016/j.engfracmech.2008.10.010
  17. Shah, S.P. and Carpinteri, A.P. (1991), Fracture Mechanics Test Methods for Concrete, Rilem report 5, Chapman and Hall.
  18. Anderson, T.L. (2004), Fracture Mechanics: Fundamentals and Applications, Third Edition.
  19. Wakchaure, M.R., Er. Shaikh, A.P. and Er. Gite, B.E. (2012), "Effect of types of fine aggregate on mechanical properties of cement concrete", Int. J. Modern Eng. Res., 2(5), 3723-3726.

피인용 문헌

  1. Drying shrinkage cracking of concrete using dune sand and crushed sand vol.126, 2016, https://doi.org/10.1016/j.conbuildmat.2016.08.141
  2. Experimental investigation for partial replacement of fine aggregates in concrete with sandstone vol.4, pp.4, 2016, https://doi.org/10.12989/acc.2016.4.4.243
  3. Evaluation of bond strength between sand concrete as new repair material and ordinary concrete substrate (The surface roughness effect) vol.157, 2017, https://doi.org/10.1016/j.conbuildmat.2017.09.183
  4. Influence of nano-silica on the failure mechanism of concrete specimens vol.19, pp.4, 2014, https://doi.org/10.12989/cac.2017.19.4.429
  5. Modeling of dimensional variations of a dune sand concrete reinforced by addition of steel fibers vol.33, pp.21, 2014, https://doi.org/10.1080/01694243.2019.1641176
  6. Properties of flowable sand concrete containing ceramic wastes vol.33, pp.24, 2014, https://doi.org/10.1080/01694243.2019.1653594
  7. Flexural behaviour of reinforced concrete beams with silica fume and processed quarry fines vol.10, pp.2, 2014, https://doi.org/10.12989/acc.2020.10.2.161
  8. Experimental Investigation of Impact Response of RC Slabs with a Sandy Soil Cushion Layer vol.2021, pp.None, 2014, https://doi.org/10.1155/2021/1562158
  9. Analysis of the Aggregate Effect on the Compressive Strength of Concrete Using Dune Sand vol.11, pp.4, 2014, https://doi.org/10.3390/app11041952
  10. Deterioration of Portland Cement Pervious Concrete in Sponge Cities Subjected to Acid Rain vol.14, pp.10, 2014, https://doi.org/10.3390/ma14102670
  11. Concretes Made of Magnesium-Silicate Rocks vol.11, pp.5, 2014, https://doi.org/10.3390/min11050441