DOI QR코드

DOI QR Code

Cyclic test for solid steel reinforced concrete frames with special-shaped columns

  • Liu, Zu Q. (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Xue, Jian Y. (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zhao, Hong T. (College of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Gao, Liang (College of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2014.06.18
  • 심사 : 2014.04.23
  • 발행 : 2014.09.30

초록

An experimental study was performed to investigate the seismic performance of solid steel reinforced concrete (SRC) frames with special-shaped columns that are composed of SRC special-shaped columns and reinforced concrete beams. For this purpose, two models of two-bay and three-story frame, including an edge frame and a middle frame, were designed and tested. The failure process and patterns were observed. The mechanical behaviors such as load-displacement hysteretic loops and skeleton curves, load bearing capacity, drift ratio, ductility, energy dissipation and stiffness degradation of test specimens were analyzed. Test results show that the failure mechanism of solid SRC frame with special-shaped columns is the beam-hinged mechanism, satisfying the seismic design principle of "strong column and weak beam". The hysteretic loops are plump, the ductility is good and the capacity of energy dissipation is strong, indicating that the solid SRC frame with special-shaped columns has excellent seismic performance, which is better than that of the lattice SRC frame with special-shaped columns. The ultimate elastic-plastic drift ratio is larger than the limit value specified by seismic code, showing the high capacity of collapse resistance. Compared with the edge frame, the middle frame has higher carrying capacity and stronger energy dissipation, but the ductility and speed of stiffness degradation are similar. All these can be helpful to the designation of solid SRC frame with special-shaped columns.

키워드

참고문헌

  1. Rammamurthy, L.N. and Hafeez Khan, T.A. (1983), "L-shaped column design for biaxial eccentricity", J. Struct. Eng., 109(8), 1903-1917. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:8(1903)
  2. Hsu, Cheng-Tzu Thomas (1989), "T-shaped reinforced concrete members under biaxial bending and axial compression", ACI Struct. J., 86(4), 460-468.
  3. Sinha, S.N.(1996), "Design of cross (+) section of column", The Indian Concrete J., 70(3), 153-158.
  4. Balaji, K.V.G.D. and Murty, D.S.R. (2001a), "Reliability analysis of RC T-shaped column sections", Indian Concrete J., 75(3), 223-227.
  5. Wang, T.C., Zhang, X.H., Zhao, H.L. and Qi, J.W. (2010), "Experimental research on seismic behavior of exterior joints with specially shaped columns reinforced by fiber", Indus. Construct., 40(1), 46-50.
  6. Shim, C.S., Chung, Y.S. and Han, J.H. (2008), "Cyclic response of concrete-encased composite columns with low steel ratio", Proceedings of the Institution of Civil Engineers: Struct. Build., 161(2), 77-89.
  7. Ellobody, E. and Yong, B. (2011a), "Numerical simulation of concrete encased steel composite columns", J. Construct. Steel Res., 67(2), 211-222. https://doi.org/10.1016/j.jcsr.2010.08.003
  8. Kim, C.S., Park, H.G. and Chung, K.S. (2012a), "Eccentric axial load testing for concrete-encased steel columns using 800MPa steel and 100MPa Concrete", J. Struct. Eng. 138(8),1019-1031. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000533
  9. Zhou, T., Chen, Z.H. and Liu, H.B. (2012b), "Seismic behavior of special shaped column composed of filled steel tubes", J. Construct. Steel Res., 75: 131-141. https://doi.org/10.1016/j.jcsr.2012.03.015
  10. Kim, S.H., Jung, C.Y. and Ann, J.H. (2011b), "Ultimate strength of composite structure with different degrees of shear connection", Steel Compos. Struct., 11(5), 375-390. https://doi.org/10.12989/scs.2011.11.5.375
  11. Tokgoz, S. and Dundar, C. (2012c), "Test of eccentrically loaded L-shaped section steel fibre high strength reinforced concrete and composite columns", Eng. Struct., 38(5): 134-141. https://doi.org/10.1016/j.engstruct.2012.01.009
  12. Li, Z., Zhang, X.F., Guo, Z.Y. and Xu, K. (2007a), "Experimental study on the mechanical property of steel reinforced concrete short columns of t-shaped cross-section", China Civil Eng. J., 40(1), 1-5.
  13. Xu, Y.F., Diao, X.Z., Guo, J., Wang, C.C., Li, X.L. and Wang, H. (2009a), "Experimental study on the biaxial eccentric pressure bearing capacity of cross-shaped steel reinforced concrete columns", J. Shenyang Jianzhu Univ. (Natural Science), 25(1), 100-105.
  14. Chen, Z.P., Xue, J.Y., Zhao, H.T., Shao, Y.J. Zhao, Y.H. and Men, J.J. (2007b), "Experimental research on seismic behavior of steel reinforced concrete special-shaped columns", J. Build. Struct., 28(3), 53-61.
  15. Xue, J.Y., Chen, Z.P., Zhao, H.T., Gao, L. and Liu, Z.Q. (2012d), "Shear mechanism and bearing capacity calculation on steel reinforced concrete special-shaped columns", Steel Compos. Struct., 13(5), 473-487. https://doi.org/10.12989/scs.2012.13.5.473
  16. Xiang, P. (2006), "Experimental research on joints of steel reinforced concrete special-shaped column and reinforced concrete beam under double-direction low-cyclic reversed loading", Master Dissertation, Guangxi University, Nanning, China.
  17. Xue, J.Y., Liu, Y., Zhao, H.T., Chen, Z.P. and Sui, Y. (2009b), "Experimental study on seismic behavior of steel reinforced concrete special-shaped column-beam joints", J. Build. Struct., 30(4), 69-77.
  18. Yang, T. and Zhang, X.D. (2009c), "Research on seismic behavior of frame with T-shaped SRC columns", J. Civil, Architect. Environ. Eng., 31(2), 33-37.
  19. Yao, Q.F. and Chen, P. (2001b), Civil Engineering Structure Test, China Architecture & Building Press, Beijing, China.
  20. Xue, J.Y., Gao, L., Liu, Z.Q., Zhao, H.T. and Ge, H.P. (2012e), "Quasi-static test and finite element analysis on lattice steel reinforced concrete middle frame with special-shaped columns", J. Build. Struct., 33(8), 31-40.

피인용 문헌

  1. Shaking Table Test on Seismic Performance of L- and V-Sectioned Reinforced Concrete Columns vol.09, pp.04, 2015, https://doi.org/10.1142/S1793431115500104
  2. Experimental studies on steel frame structures of traditional-style buildings vol.22, pp.2, 2016, https://doi.org/10.12989/scs.2016.22.2.235
  3. Research on damage of solid-web steel reinforced concrete T-shaped columns subjected to various loadings vol.24, pp.4, 2014, https://doi.org/10.12989/scs.2017.24.4.409
  4. Dynamic experimental study on single and double beam-column joints in steel traditional-style buildings vol.63, pp.5, 2014, https://doi.org/10.12989/sem.2017.63.5.617
  5. Seismic response of steel reinforced concrete spatial frame with irregular section columns under earthquake excitation vol.14, pp.4, 2014, https://doi.org/10.12989/eas.2018.14.4.337
  6. Experimental and numerical study on seismic performance of steel reinforced concrete spatial frame with irregular section columns vol.242, pp.None, 2014, https://doi.org/10.1016/j.engstruct.2021.112507