참고문헌
- Anusavice KJ. Phillips' science of dental materials. 11th ed. Philadelphia: W.B. Saunders, 621- 654, 2003.
- Bindl A, Mormann WH. Marginal and internal fit of allceramic CAD/CAM crown-copings on chamfer preparations. J Oral Rehabil, 32, 441-447, 2005. https://doi.org/10.1111/j.1365-2842.2005.01446.x
- Christensen GJ. Impressions are changing: deciding on conventional, digital or digital plus in-office milling. J Am Dent Assoc, 140, 1301-1304, 2009. https://doi.org/10.14219/jada.archive.2009.0054
- Coli P, Karlsson S. Precision of a CAD/CAM technique for the production of zirconium dioxide copings. Int J Prosthodont, 17, 577-580, 2004.
- Kim KB, Kim JH, Kim WC, Kim HY, Kim JH. Marginal fit evaluation of 3 unit fixed dental prostheses fabricated by rapid prototyping method. J Kor Aca Den Tec, 34, 105-111, 2012. https://doi.org/10.14347/kadt.2012.34.2.105
- Kim KB, Kim JH, Kim WC, Kim Jh. evaluation of 3 unit fixed dental prostheses fabricated by rapid prototyping method, J Kor Aca Den Tec, 34, 353-359, 2012. https://doi.org/10.14347/kadt.2012.34.2.105
- McLean JW, von Frauenhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J, 131, 107-111, 1971. https://doi.org/10.1038/sj.bdj.4802708
- Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J, 28, 44-56, 2009. https://doi.org/10.4012/dmj.28.44
- Rekow ED. High-technology innovations and limitations for restorative dentistry. Dent Clin North Am, 37, 513-524, 1993.
- Tinschert J, Natt G, Mautsch W, Spikermann H, Anusavice KJ. Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent, 26, 367-374, 2001.
피인용 문헌
- 첨가법에 의해 제작된 단관의 내면 적합도 분석 vol.37, pp.4, 2014, https://doi.org/10.14347/kadt.2015.37.4.229
- 3D 프린팅 기술로 출력된 치과 보철물의 임상적 적합도 평가 vol.41, pp.1, 2014, https://doi.org/10.14347/kadt.2019.41.1.1