Journal of the Korea Institute of Information and Communication Engineering (한국정보통신학회논문지)

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Requirement analysis and architecture establishment for ship production monitoring system

조선소 생산공정모니터링 시스템 개발을 위한 요구사항 분석 및 아키텍처 수립

  • Lee, Kwangkook (Department of Naval Architecture & Ocean IT Engineering, Kyungnam University)
  • Received : 2014.05.19
  • Accepted : 2014.09.05
  • Published : 2014.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Shipbuilding production management is one of the most significant activities in productivity improvement. Shop-floor managers and production planners still do not have enough production information for shop-floor scheduling due to shortage of information sharing among them. In this research, main issues were derived from requirement analysis between production planning and shop-floor control to establish a software system architecture for ship production monitoring system(SPMS), which is developed with component based design(CBD). The proposed system's key functions cover from block shop assembly to quay outfitting stage to visualize production progress as well as to maximize production information sharing. The system will allow more reliable and accurate production information to permeate down to members of the workforce just in time.

조선소에서 생산관리는 생산성 향상과 가장 밀접한 업무 중의 하나이다. 현업 생산관리자와 공정계획 엔지니어들은 상호 간의 정보 공유 미흡으로 인해 공정계획 및 공정관리에 대한 충분한 생산정보를 얻지 못한다. 본 연구에서는 생산계획과 공정관리의 요구사항 분석을 통하여 생산공정모니터링 시스템에 대한 주요 이슈를 도출하고, 콤포넌트 기반 설계 기법을 활용하여 시스템 아키텍처를 수립하였다. 제안한 시스템의 주요 기능은 블록 조립에서 안벽의장 단계까지 수립하여 생산공정현황을 시각적으로 보여 줄 뿐 아니라 공정정보 공유를 극대화하는 것이다. 본 시스템은 생산관리자에게 신뢰성 있고 정확한 생산 정보를 제시간에 제공할 수 있을 것으로 기대된다.

Keywords

References

  1. Manufacturing Enterprise Solutions Association(MESA), "MES Explained : A High Level Vision for Executives", Manufacturing Enterprise Solutions Association(MESA), 2007.
  2. I. Hwang, et al., "Development of Shipbuilding Execution Scheduling Support System using Mobile Device : A Case Study for a Panel Block Assembly Shop", Journal of the Society of Naval Architects of Korea, Vol. 50, No. 4, pp. 262-271, August 2013. https://doi.org/10.3744/SNAK.2013.50.4.262
  3. H. Panetto, S. Baina, & G. Morel, "Mapping the IEC 62264 Models onto the Zachman Framework for Analysing Products Information Traceability: A Case Study" Journal of Intelligent Manufacturing, Vo.18, No.6, pp.679-698, 2007. https://doi.org/10.1007/s10845-007-0040-x
  4. A. Koronios, D. Nastasie, V. Chanana, & A. Haider, "Integration through standards - An overview of international standards for engineering asset management" , 2nd World Congress on Engineering Asset Management and the Fourth International Conference on Condition Monitoring, Harrogate, United Kingdom, 11 June 2007, pp.11-14, 2007.
  5. J.M. Mendes, et al., "Engineering of service-oriented automation systems: a survey". Proceeding of IPROMS Conference on Innovative Production Machines and Systems, Cardiff, United Kingdom, 4 June 2007, pp.33-38, 2007.
  6. S. Karnouskos, O. Baecker, L.M.S. De Souza & P. Spiess, "Integration of SOA-ready networked embedded devices in enterprise systems via a cross-layered web service infrastructure". 12th IEEE Conference on Emerging Technologies and Factory Automation, Cagliari, Italy, 25-28 September 2007, pp.293-300, 2007.
  7. W.S. Yoo, Y.D. Yoon, & H.J. Shin, "A Study on Development of the Manufacturing Execution Systems (MES) for Order Based Production Small and Medium - Sized Enterprises", Journal of the Korean Institute of Plant Engineering, Vo.14, No.4, pp.77-85, 2009.
  8. J.H. Park & Y.N. Yoshida, "An MES implementation methodology for the medium-sized manufacturing company with multiple-types of products and mixed process flows", Proceedings of the Korean Operations and Management Science Society Conference, Cheongju, Republic of Korea, 13-14 May 2005, pp.206-215, 2005.
  9. K.D. Kim, J.H. Choi, & D.Y. Kim, "Application of ERP and MES in Case of Automobile Manufacturing Company", Journal of Industrial Technology, Vol. 20, No. 2, pp.51-60, 2002.
  10. K.K. Lee, J.G. Shin & C.H. Ryu, "Development of Simulation-based Production Execution System in a Shipyard: A Case Study for a Panel Block Assembly Shop" Production Planning & Control: The Management of Operations, Vol. 20, No. 8, pp.750-768, 2009. https://doi.org/10.1080/09537280903164128
  11. M. Back, et al., "Design and Development of Scenario-Based Simulation System to Improve Shipbuilding Execution Scheduling Assessment -A Case Study on Panel Line-", Transactions of the Society of CAD/CAM Engineers, Vol. 18, No. 3, pp. 211-223. June 2013. https://doi.org/10.7315/CADCAM.2013.211
  12. S.H. Lee, et al., " A manufacturing execution system for LNG tank fabrication shop in shipbuilding", Proceedings of the Korean Operations and Management Science Society Conference, Mokpo, Republic of Korea, 21-22, pp.450-453, May 2004.
  13. H. H. Yun & D. Sheen, "Development of Monitoring System for Hull Construction Processes Using TOC Analysis", Journal of the Society of Naval Architects of Korea, Vol. 45, No. 3, pp. 315-321, June 2008. https://doi.org/10.3744/SNAK.2008.45.3.315
  14. K.K. Lee, "Strategy Planning of Digital Shipbuilding Simulation by Workflow Analysis of Production Planning in a Shipyard", Journal of the Korea Institute of Information and Communication Engineering, Vol.17, No.8, pp.1761-1768, Aug, 2013. https://doi.org/10.6109/jkiice.2013.17.8.1761
  15. Y. Han, System and method for managing production of ship building, KR Patent, 10-1073256, to Hyundae Heavy Industry, Korean Intellectual Property Office, Daejeon, 2011.
  16. S. Shin, et al., A method of controlling the progress of ship production, KR Patent, 10-2008-0004052, to STX Shipbuilding, Korean Intellectual Property Office, Daejeon, 2008.
  17. S. Nonoguchi, et al., Ship production management system, KR Patent, 10-1075898, to Kawasaki Heavy Industry, Korean Intellectual Property Office, Daejeon, 2011.