DOI QR코드

DOI QR Code

The Comparative Study on the Shear Buckling Stress of Trapezoidal and Sinusoidal Corrugated Steel Plate

제형 및 정현파형 주름강판의 전단좌굴특성 비교 연구

  • 손수덕 (한국기술교육대 건축공학부) ;
  • 유미나 (한국기술교육대 건축공학과 대학원) ;
  • 이승재 (한국기술교육대 건축공학부) ;
  • 강주원 (영남대학교 건축학부)
  • Received : 2014.05.29
  • Accepted : 2014.08.27
  • Published : 2014.09.30

Abstract

Corrugated steel plate is a steel plate that is processed to be corrugated in trapezoidal, sinusoidal or circular shapes, and has high flexibility in the corrugated direction and high shear stiffness in the orthogonal direction from the corrugation. Compared to the plate girder, this is economically effective in the regard that it can decrease self-weight when used in the web of the girder. However, shear buckling pattern of the plates and their resistance ability are different according to the different corrugation shapes and their parameter. Therefore, this study conducts liner buckling analysis of trapezoidal plate and sinusoidal plate and analyzes their shear buckling mode and shear buckling stress in order to compare the different shapes' shear buckling patterns and their resistance ability. The result of this comparison shows that the shear buckling stress of trapezoidal shape is bigger than that of sinusoidal shape by up to 30% in the section where local bucking occurs. However, the shear bucking stress of sinusoidal shape is bigger than that of trapezoidal shape by up to 15% in the section where global buckling occurs.

Keywords

Acknowledgement

Supported by : 국토해양부

References

  1. 김영완, 균일 분포하중을 받는 사다리꼴 주름판의 정적해석, 한국동력기계공학회지, 18권, 1호, p.p. 99-105, 2014 https://doi.org/10.9726/kspse.2014.18.1.099
  2. 이종원, 기하학적 특성을 고려한 제형 파형강판 복부판의 연성 전단 좌굴, 박사학위 논문, 고려대학교, p.122, 2005
  3. E. Gruber, Berechnung Prismatisher Scheibenwerke, Memoires, Association Internationale des Ponts et Charpentes, Vol.1, p.225, 1932
  4. G. Winter and M. Pei, Tipped plate Construction, Journal American concrete institute, 1947
  5. I. Gaafar, Hipped plate analysis considering joint displacements, ASCE, Vol.119, p.p. 743-784, 1954
  6. J. T. Easley, D.E. McFarland, Buckling of light-gage corrugated metal shear diaphragms, Journal of the Structural Division, Vol.95, No.12, p.p. 1497-1516, 1969
  7. M. Elgaaly, R.W. Hamilton and A. Seshardri, Shear strength of beam with corrugated webs, ASCE, Vol. 122, No. 4, p.p.390-398, 1996 https://doi.org/10.1061/(ASCE)0733-9445(1996)122:4(390)
  8. 한택희, 파형 plate의 탄성전단좌굴 특성, 석사학위논문, 고려대학교, p.110, 2000
  9. 윤상열, 제형파형 Plate의 탄성전단좌굴 특성, 석사학위논문, 고려대학교, p.67, 2002
  10. Lee, S.R., Shear Buckling Strength of Trapezoidally Corrugated Steel Webs, Ph.D. thesis, Korea university, p.136, 2004
  11. 길흥배, 이승록, 이학은, 이필구, 제형파형강판의 전단거동에 영향을 미치는 기하학적 요소에 대한연구, 한국강구조학회논문집, 15권, 5호, p.p. 591-602, 2003
  12. 길흥배, 이승록, 이학은, 윤태양, 제형파형강판을 사용한 교량 복부판의 탄성 전단좌굴에 관한 연구, 대한토목학회논문집, 24권, 1A호,p.p. 197-202, 2004
  13. J. W. Lee, S. R. Lee, H. B. Gil, H. E. Lee, Shear Buckling Strength of Trapezoidally Corrugated Steel Webs for Bridges, Proceedings of Japan-Korea Joint Seminar on Steel Bridges(JSSB-JK), p.p.329-339, 2003
  14. 지효선, 파형 복부판을 갖는 플레이트 거더의 좌굴거동, 한국강구조학회 논문집, 23권, 2호, p.p. 221-228, 2011
  15. H. Nilson, A.R. Ammar, Finite Element Analysis of Metal Deck Shear Diaphragms, Journal of the Structural Division(ASCE), Vol.100, No.4, p.p. 711-726, 1974
  16. J.M. Davis, "SIMPLIFIED DIAPHRAGM ANALYSIS", Journal of the Structural Division(ASCE), Vol.103, No.ST11, p.p. 2093-2109, 1978
  17. H.A. Mang, "Finite Element Analysis of Doubly Corrugated Shells", Journal of the Structural Division(ASCE), Vol.102, No.10, p.p. 2033-2051, 1976
  18. McFarland, An investigation of the static stability of corrugated rectangular plates loaded in pure shear, Ph.D. thesis, University of Kansas, 1967
  19. M. Mukhopadhyay, Finite element static and dynamic analyses of folded plates, Journal of Engineering Structures, Vol. 21, p.p. 277-287, 1999 https://doi.org/10.1016/S0141-0296(97)90172-3
  20. 서기홍, 김성호, 임성순, 주석범, 직교이방성 판을 이용한 파형강판의 거동 해석, 대한토목학회논문집, 25권, 1A호, p.p. 19-29, 2005
  21. 정강, 김영완, 사각 주름판의 굽힘강성 및 굽힘해석, 한국동력기계공학회지, 16권, 6호, p.p. 38-44, 2012 https://doi.org/10.9726/kspse.2012.16.6.038
  22. 김영완, 균일 분포하중을 받는 사다리꼴 주름판의 정적해석, 한국동력기계공학회지, 18권, 1호, p.p. 99-105, 2014 https://doi.org/10.9726/kspse.2014.18.1.099
  23. H.H Abbas ,R. Sause and R.G. Driver, Shear strength and stability of high performance steel corrugated web girders, Social stability research council Conference, p.p. 361-388, 2002
  24. H.H Abbas ,R. Sause and R.G. Driver, Behavior of corrugated web I-girders under in-plane loads, Journal of Engineering Mechanics, Vol.132, No.8, p.p. 806-814, 2006 https://doi.org/10.1061/(ASCE)0733-9399(2006)132:8(806)
  25. R.G. Driver, H.H. Abaas, R. Sause, Shear behavior of corrugated web bridge girder, Journal of Structural Engineering, Vol.132, No.2, p.p. 195-203, 2006 https://doi.org/10.1061/(ASCE)0733-9445(2006)132:2(195)
  26. 손수덕, 이승재, 실변수 유전자 알고리즘을 이용한 사인형 주름 웨브 보의 최적구조설계, 한국강구조학회 논문집, 23권, 5호, p.p. 581-594, 2011
  27. 손수덕, 유미나, 이승재, 사인형 주름웨브보의 이산화 최적구조설계, 한국강구조학회 논문집, 24권, 6호, p.p. 671-682, 2012 https://doi.org/10.7781/kjoss.2012.24.6.671
  28. 손수덕, 유미나, 이승재, 최소중량설계에 의한 사인형 주름웨브보의 단면특성, 대한건축학회 논문집 구조계, 28권, 10호, p.p. 73-80, 2012
  29. 손수덕, 유미나, 이승재, 강주원, 차분진화알고리즘을 이용한 정현파형 주름웨브보의 최적설계프로그램 개발, 대한건축학회 논문집, 29권, 12호, p.p. 21-28, 2013
  30. 유미나, 손수덕, 이승재, 강주원, ABAQUS를 이용한 정현파형 주름판의 전단좌굴해석과 경계조건에 관한 연구, 대한건축학회 논문집 구조계, 29권, 11호, p.p. 3-11, 2013
  31. Theodore V. Galambos, Stability criteria for metal structures, Fifth Ed., A WILEY, Inc., 1998
  32. El-Matwally, A. S., Prestressed composite girders with corrugated webs, M. Sc. Thesis, Department of Civil Engineering, The University of Calgary, Calgary, Alta., 1999
  33. Cafolla, Shear flexibility and strength of corrugated decks, Journal of the structural division, Vol.94, No.ST11, p.p. 2549-2580, 1968
  34. Sayed-Ahmed. Ezzeldine Yazeed, Plate girders with corrugated steel webs, AISC Engineering Journal, First Quater, p.p. 1-13, 2005
  35. ABAQUS/CAE User's Manual, ABAQUS 6.12 student edition, Dassault systems Simulia Corp.
  36. H. Pasternak and D. Hannebauer, Stahlbau-Kalender 2004, p.p.461-469, 2004
  37. (주)브이이엔지, 초급 및 중급 사용자를 위한 Abaqus 입문서, 비비미디어, 2013
  38. 손수덕, 유미나, 이승재, 강주원, 정현파형 주름강판의 전단좌굴특성 분석, 한국구조물진단유지관리공학회 논문집, 18권, 3호 p.p.10-19, 2014 https://doi.org/10.11112/jksmi.2014.18.3.010
  39. M.E.A.-H. Eldib, Shear buckling strength and design of curved corrugated steel webs for bridges, Journal of constructional steel research, Vol. 65, p.p.2129-2139, 2014

Cited by

  1. An Experimental Study on the Shear Hysteresis and Energy Dissipation of the Steel Frame with a Trapezoidal-Corrugated Steel Plate vol.10, pp.3, 2017, https://doi.org/10.3390/ma10030261