DOI QR코드

DOI QR Code

Theoretical tensile model and cracking performance analysis of laminated rubber bearings under tensile loading

  • Chen, Shicai (Department of Civil Engineering, Beijing University of Technology) ;
  • Wang, Tongya (Department of Civil Engineering, Beijing University of Technology) ;
  • Yan, Weiming (Department of Civil Engineering, Beijing University of Technology) ;
  • Zhang, Zhiqian (Department of Civil Engineering, Beijing University of Technology) ;
  • Kim, Kang-Suk (Department of Civil Engineering, Tsinghua University)
  • 투고 : 2012.11.12
  • 심사 : 2014.06.20
  • 발행 : 2014.10.10

초록

To analyze the tension performance of laminated rubber bearings under tensile loading, a theoretical tension model for analyzing the rubber bearings is proposed based on the theory of elasticity. Applying the boundary restraint condition and the assumption of incompressibility of the rubber (Poisson's ratio of the rubber material is about 0.5 according the existing research results), the stress and deformation expressions for the tensile rubber layer are derived. Based on the derived expressions, the stress distribution and deformation pattern especially for the deformation shapers of the free edges of the rubber layer are analyzed and validated with the numerical results, and the theory of cracking energy is applied to analyze the distributions of prediction cracking energy density and gradient direction. The prediction of crack initiation and crack propagation direction of the rubber layers is investigated. The analysis results show that the stress and deformation expressions can be used to simulate the stress distribution and deformation pattern of the rubber layer for laminated rubber bearings in the elastic range, and the crack energy method of predicting failure mechanism are feasible according to the experimental phenomenon.

키워드

참고문헌

  1. Benthem, J.P. and Minderhoud, P. (1972), "The problem of solid cylinder compressed between rough rigid stamps", Int. J. Solid. Struct., 8, 1027-1042. https://doi.org/10.1016/0020-7683(72)90067-4
  2. Hino, J., Yoshitomi, S. and Tsuji, M. (2008), "Bound of aspect ratio of base-isolated buildings considering nonlinear tensile behavior of rubber bearing", Struct. Eng. Mech., 30(3), 351-368. https://doi.org/10.12989/sem.2008.30.3.351
  3. Imbimbo, M. and Luca, A.D. (1998), "FE stress analysis of rubber bearings under axial loads", Comput. Struct., 68, 31-39. https://doi.org/10.1016/S0045-7949(98)00038-8
  4. Jain, S.K. and Thakkar, S.K. (2005), "Experimental investigations on laminated rubber bearings", Bull Earthq. Eng, 3(1), 129-136. https://doi.org/10.1007/s10518-005-0203-0
  5. Kilar, V. and Koren, D. (2009), "Seismic behavior of asymmetric base isolated structures with various distributions of isolators", Eng. Struct, 31(4), 910-921. https://doi.org/10.1016/j.engstruct.2008.12.006
  6. Lee, H.P., Cho, M.S., Kim, S.Y., Park, J.Y. and Jang, K.S. (2014), "Experimental study on the compressive stress dependency of full scale low hardness lead rubber bearing", Struct. Eng. Mech., 50(1), 089-103. https://doi.org/10.12989/sem.2014.50.1.089
  7. Ling, Y., Engel, P.A. and Brodsky, W.L. (1995), "Compression of bonded annular rubber blocks", J. Eng. Mech., 121(6), 661-666. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:6(661)
  8. Liu, W.G., Yang, Q.R. and Zhou, F.L. (2004), "Nonlinear elastic rotation and shear property theoretical and experimental research of rubber isolators", Earthq. Eng. Eng. Vib., 24(2), 158-167.
  9. Mars, W.V. (2002), "Cracking energy density as a predictor of fatigue life under multiaxial conditions." Rub. Chem. Technol., 75, 1-17. https://doi.org/10.5254/1.3547670
  10. Matsuda, A. (2004), "Evaluation for mechanical properties of laminated rubber bearings using finite element analysis", J. Press. Ves. Tech., 126, 134-140. https://doi.org/10.1115/1.1636784
  11. Melkumyan, M.G. (2013), "New approach in design of seismic isolated buildings applying clusters of rubber bearings in isolation systems", Eartq. Struct., 4(6), 587-606. https://doi.org/10.12989/eas.2013.4.6.587
  12. Mosqueda, G., Masroor, A., Sanchez, J. and Ryan, K. (2010), "Performance Limit States of Seismically Isolated Buildings with Elastomeric Bearings", Proceedings from the 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, July.
  13. Muramatsu, Y., Nishikawa, I. and Kawabata, I. (2001), "Tensile property of large-sized natural rubber bearing", AIJ J. Tech., 12, 53-56.
  14. Sarno, L.D., Chioccarelli, E. and Cosenza, E. (2011), "Seismic response analysis of an irregular base isolated building", Bull Earthq. Eng., 9, 1673-1702. https://doi.org/10.1007/s10518-011-9267-1
  15. Takaoka, E., Takenaka, Y. and Nimura, A. (2011), "Shaking table test and analysis method on ultimate behavior of slender base-isolated structure supported by laminated rubber bearings", Earthq. Eng. Struct. Dyn, 40, 551-570. https://doi.org/10.1002/eqe.1048
  16. Warn, G.P. and Whittaker, A.S. (2008), "Vertical stiffness of elastomeric and lead-rubber seismic isolation bearings", J. Struct. Eng., 133(9), 1227-1236.
  17. Xu, L. and Wu, G.Z. (1999), "Some forms of strain energy function for rubber with finite element analysis", Rub. Indust., 46(12), 707-711.
  18. Xu, Z.L. (2009), A concise course in elasticity, Higher education press, Beijing.
  19. Yang, Q.R., Liu, W.G., He, W.F. and Feng, D.M. (2010), "Tensile stiffness and deformation model of rubber isolators in tension and tension-shear states", J. Eng. Mech., 136(4), 429-437. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000007
  20. Yoshida, J., Abe, M. and Fujino, Y. (2004), "Three-dimensional finite-element analysis of high damping rubber bearings", J. Eng. Mech., 130(5), 607-620. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:5(607)
  21. Zhang, Z.Q. (2012), "Tension property of laminated rubber bearings under tensile loading", Ph.D. Dissertation, Beijing University of Technology, Beijing, China.