DOI QR코드

DOI QR Code

Electrical signal characteristics of conductive asphalt concrete in the process of fatigue cracking

  • Yang, Qun (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University) ;
  • Li, Xu (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University) ;
  • Wang, Ping (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University) ;
  • Zhang, Hong-Wei (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University)
  • 투고 : 2014.01.26
  • 심사 : 2014.06.04
  • 발행 : 2014.09.25

초록

As a kind of intelligent materials, conductive asphalt concrete has a broad application prospect including melting ice and snow on the pavement, closing cracks in asphalt concrete, sensing pavement damage, and so on. Conductive pavement will be suffered from fatigue failure as conventional pavement in the process of service, and this fatigue damage of internal structure can be induced by electrical signal output. The characteristics of electrical signal variation of conductive asphalt concrete in the process of fatigue cracking were researched in this paper. The whole process was clearly divided into three stages according to resistance changes, and the development of fatigue damage wasn't obvious in stage I and stage II, while in stage III, the synchronicity between the resistance and damage began to appear. Thus, fatigue damage variable D and initial damage value $D_0$ represented by the functions of resistance were introduced in stage III. After calculating the initial damage value $D_0$ under different stress levels, it was concluded that the initial damage value $D_0$ had no noticeable change, just ranged between 0.24 and 0.25. This value represented a critical point which could be used to inform the repair time of early fatigue damage in the conductive asphalt pavement.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. AASHTO (2007), Standard method of test for determining the creep compliance and strength of hot mix asphalt (HMA) using the indirect tensile test device, T-322, Washington DC.
  2. Chung, D.D.L. (1998), "Self-monitoring structural materials", Mater. Sci. Eng., 22(2), 57-78. https://doi.org/10.1016/S0927-796X(97)00021-1
  3. Fan, Z., Feng, X. and Zhou, J. (2013), "A novel transmissibility concept based on wavelet transform for structural damage detection", Smart Mater. Struct., 12(SI), 291-308. https://doi.org/10.12989/sss.2013.12.3_4.291
  4. Garcia, A., Schlangen, E., Ven, M. and Liu, Q. (2009),"Electrical conductivity of asphalt mortar containing conductive fibers and fillers",Constr. Build.Mater., 23(10), 3175-3181. https://doi.org/10.1016/j.conbuildmat.2009.06.014
  5. Garcia, A., Schlangen, E., Ven, M. and Vliet, D. (2011), "Induction heating of mastic containing conductive fibers and fillers", Mater. Struct., 44(2), 499-508. https://doi.org/10.1617/s11527-010-9644-2
  6. Huang, B., Chen, X. and Shu, X. (2009), "Effects of electrically conductive additives on laboratory-measured properties of asphalt mixtures", J. Mater. Civil. Eng., 21(10), 612-617. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:10(612)
  7. Jaeseung, K. and Chulseung, K. (2012), "Development of a predictive system for estimating fatigue life of asphalt mixtures using the indirect tensile test", J. Transp. Eng. - ASCE, 138(12), 1530-1540. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000452
  8. Jo, H., Park, J.W., Spencer, B.F. and Jung, H.J. (2013), "Develoment of high-sensitivity wireless strain sensor for structural health monitoring", Smart Mater. Struct., 11(5), 477-496. https://doi.org/10.12989/sss.2013.11.5.477
  9. JTG (2011), Standard test methods of bitumen and bituminous mixtures for highway engineering, T 0716, Beijing.
  10. Liu, X., Wu, S., Li, N. and Gao, B. (2008), "Self-monitoring application of asphalt concrete containing graphite and carbon fibers", J. Wuhan Univ. Technol. (Mater. Sci. Ed.), 23(2), 268-271. https://doi.org/10.1007/s11595-006-2268-2
  11. Shan, L., Tan, Y., Underwood, B. and Kim, Y. (2011), "Separation of thixotropy from fatigue process of asphalt binder", Transport. Res. Rec., (2207), 89-98.
  12. Walubita, L., Jamison, B., Das, G., Scullion, T., Martin, A., Rand, D. and Mikhail, M. (2011), "Search for a laboratory test to evaluate crack resistance of hot-mix asphalt", Transport. Res. Rec., (2210), 73-80.
  13. Wen, H., Bhusal and Sushanta (2013), "A laboratory study to predict the rutting and fatigue behavior of asphalt concrete using the indirect tensile test", J. Test. Eval., 41(2), 299-304.
  14. Wu, S., Mo, L. and Shui, Z. (2003), "Piezoresistivity of graphite modified asphalt-based composites", Key Eng. Mater., 249, 391-395. https://doi.org/10.4028/www.scientific.net/KEM.249.391
  15. Wu, S., Mo, L., Shui, Z. and Chen, Z. (2005), "Investigation of the conductivity of asphalt concrete containing conductive fillers", Carbon, 43(7), 1358-1363. https://doi.org/10.1016/j.carbon.2004.12.033
  16. Yang, Q., Li, X. and Wang, P. (2013), "Resistivity measurement of conductive asphalt concrete based on two-electrode method", J. Cent. South Univ., 20(9), 2599-2604. https://doi.org/10.1007/s11771-013-1774-6
  17. Yehia, S. and Tua, C. (2000), "Thin conductive concrete overlay for bridge deck deicing and anti-icing", Transport. Res. Rec., (1698), 45-53.
  18. Zhi, S. (2012), "Evaluation of fatigue crack behavior in asphalt concrete pavements with different polymer modifiers", Constr. Build.Mater., 27(1), 117-125. https://doi.org/10.1016/j.conbuildmat.2011.08.017

피인용 문헌

  1. Piezoresistive response of conductive Hot Mix Asphalt mixtures modified with carbon nanofibers vol.106, 2016, https://doi.org/10.1016/j.conbuildmat.2015.12.187