DOI QR코드

DOI QR Code

Fatigue damage monitoring and evolution for basalt fiber reinforced polymer materials

  • Li, Hui (Research Center of Structural Monitoring and Control, School of Civil Engineering, Harbin Institute of Technology) ;
  • Wang, Wentao (Research Center of Structural Monitoring and Control, School of Civil Engineering, Harbin Institute of Technology) ;
  • Zhou, Wensong (Research Center of Structural Monitoring and Control, School of Civil Engineering, Harbin Institute of Technology)
  • 투고 : 2013.01.22
  • 심사 : 2013.07.16
  • 발행 : 2014.09.25

초록

A newly developed method based on energy is presented to study the damage pattern of FRP material. Basalt fiber reinforced polymer (BFRP) is employed to monitor the damage under fatigue loading. In this study, acoustic emission technique (AE) combined with scanning electronic microscope (SEM) technique is employed to monitor the damage evolution of the BFRP specimen in an approximate continuous scanning way. The AE signals are analyzed based on the wavelet transform, and the analyses are confirmed by SEM images. Several damage patterns of BFRP material, such as matrix cracking, delamination, fiber fracture and their combinations, are identified through the experiment. According to the results, the cumulative energy (obtained from wavelet coefficients) of various damage patterns are closely related to the damage evolution of the BFRP specimens during the entire fatigue tests. It has been found that the proposed technique can effectively distinguish different damage patterns of FRP materials and describe the fatigue damage evolution.

키워드

참고문헌

  1. Caprino, G., Teti, R. and de Iorio, I. (2005), "Predicting residual strength of pre-fatigued glass fibre-reinforced plastic laminates through acoustic emission monitoring", Compos. Part B - Eng., 36(5), 365-371. https://doi.org/10.1016/j.compositesb.2005.02.001
  2. de Groot, P.J., Wijnen, P.A.M. and Janssen, R.B.F. (1995), "Real-time frequency determination of acoustic emission for different fracture mechanisms in carbon epoxy composites", Compos. Sci. Technol., 55(4), 405-412. https://doi.org/10.1016/0266-3538(95)00121-2
  3. de Oliveira, R. and Marques, A.T. (2008), "Health monitoring of FRP using acoustic emission and artificial neural networks", Comput. Struct., 86(3-5), 367-373. https://doi.org/10.1016/j.compstruc.2007.02.015
  4. Ding, Y., Reuben, R.L. and Steel, J.A. (2004), "A new method for waveform analysis for estimating AE wave arrival times using wavelet decomposition", NDT & E. Int., 37(4), 279-290. https://doi.org/10.1016/j.ndteint.2003.10.006
  5. Eckles, W. and Awerbuch, J. (1988), "Monitoring acoustic-emission in cross-ply graphite epoxy laminates during fatigue loading", J. Reinf. Plast. Comp., 7(3), 265-283. https://doi.org/10.1177/073168448800700305
  6. Fang, D. and Berkovits, A. (1995), "Fatigue design-model based on damage mechanisms revealed by acoustic-emission measurements", J. Eng. Mater. - T ASME, 117(2), 200-208. https://doi.org/10.1115/1.2804530
  7. Giordano, M., Calabro, A., Esposito, C., D'Amore, A. and Nicolais, L. (1998), "An acoustic-emission characterization of the failure modes in polymer-composite materials", Compos. Sci. Technol., 58(12), 1923-1928. https://doi.org/10.1016/S0266-3538(98)00013-X
  8. Grabowska, J., Palacz, M. and Krawczuk, M. (2008), "Damage identification by wavelet analysis", Mech. Syst. Signal Pr., 22(7), 1623-1635. https://doi.org/10.1016/j.ymssp.2008.01.003
  9. Gutkin, R., Green, C.J., Vangrattanachai, S., Pinho, S.T., Robinson, P. and Curtis, P.T. (2011), "On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses", Mech. Syst. Signal Pr., 25(4), 1393-1407. https://doi.org/10.1016/j.ymssp.2010.11.014
  10. Maji, A.K., Satpathi, D. and Kratochvil, T. (1997), "Acoustic emission source location using lamb wave modes", J. Eng. Mech. - ASCE, 123(2), 154-161. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:2(154)
  11. Mizutani, Y., Nagashima, K., Takemoto, M. and Ono, K. (2000), "Fracture mechanism characterization of cross-ply carbon-fiber composites using acoustic emission analysis", NDT & E. Int., 33(2), 101-110. https://doi.org/10.1016/S0963-8695(99)00030-4
  12. Ni, Q.Q. and Iwamoto, M. (2002), "Wavelet transform of acoustic emission signals in failure of model composites", Eng. Fract. Mech., 69(6), 717-728. https://doi.org/10.1016/S0013-7944(01)00105-9
  13. Park, H.W., Sohn, H., Law, K.H. and Farrar, C.R. (2007), "Time reversal active sensing for health monitoring of a composite plate", J. Sound Vib., 302(1-2), 50-66. https://doi.org/10.1016/j.jsv.2006.10.044
  14. Park, J.M., Kiin, P.G., Jang, J.H., Wang, Z., Hwang, B.S. and DeVries, K.L. (2008), "Interfacial evaluation and durability of modified Jute fibers/polypropylene (PP) composites using micromechanical test and acoustic emission", Compos. Part B - Eng., 39(6), 1042-1061. https://doi.org/10.1016/j.compositesb.2007.11.004
  15. Philippidis, T.P. and Assimakopoulou, T.T. (2008), "Using acoustic emission to assess shear strength degradation in FRP composites due to constant and variable amplitude fatigue loading", Compos. Sci. Technol., 68(3), 840-847. https://doi.org/10.1016/j.compscitech.2007.08.012
  16. Qi, G. (2000), "Wavelet-based AE characterization of composite materials", NDT & E. Int., 33(3), 133-144. https://doi.org/10.1016/S0963-8695(99)00037-7
  17. Sohn, H., Park, G., Wait, J.R., Limback, N.P. and Farrar, C.R. (2004), "Wavelet-based active sensing for delamination detection in composite structures", Smart. Mater. Struct., 13(1), 153-160. https://doi.org/10.1088/0964-1726/13/1/017
  18. Sung, D.U., Kim, C.G. and Hong, C.S. (2002), "Monitoring of impact damages in composite laminates using wavelet transform", Compos. Part B -Eng., 33(1), 35-43.
  19. Surgeon, M. and Wevers, M. (1999), "Modal analysis of acoustic emission signals from CFRP laminates", NDT & E. Int., 32(6), 311-322. https://doi.org/10.1016/S0963-8695(98)00077-2
  20. Unnthorsson, R., Runarsson, T. P. and Jonsson, M. T. (2008), "Acoustic emission based fatigue failure criterion for CFRP", Int. J. Fatigue, 30(1), 11-20. https://doi.org/10.1016/j.ijfatigue.2007.02.024

피인용 문헌

  1. Effect of basalt fibers on fracture energy and mechanical properties of HSC vol.17, pp.4, 2016, https://doi.org/10.12989/cac.2016.17.4.553
  2. Fatigue behavior and failure mechanism of basalt FRP composites under long-term cyclic loads vol.88, 2016, https://doi.org/10.1016/j.ijfatigue.2016.03.004
  3. A Review of Non-Destructive Damage Detection Methods for Steel Wire Ropes vol.9, pp.13, 2014, https://doi.org/10.3390/app9132771
  4. Enhancing the Punching Load Capacity of Reinforced Concrete Slabs Using an External Epoxy-Steel Wire Mesh Composite vol.7, pp.8, 2014, https://doi.org/10.3390/fib7080068
  5. Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour vol.34, pp.6, 2020, https://doi.org/10.12989/scs.2020.34.6.877