Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Three dimensional static and dynamic analysis of two dimensional functionally graded annular sector plates

  • Asemi, Kamran (Mechanical Engineering Department, Amirkabir University of Technology) ;
  • Salehi, Manouchehr (Mechanical Engineering Department, Amirkabir University of Technology) ;
  • Sadighi, Mojtaba (Mechanical Engineering Department, Amirkabir University of Technology)
  • Received : 2012.09.15
  • Accepted : 2014.07.20
  • Published : 2014.09.25
⟨ Previous Next ⟩

Abstract

In this paper, three dimensional static and dynamic analyses of two dimensional functionally graded annular sector plates have been investigated. The material properties vary through both the radial and axial directions continuously. Graded finite element and Newmark direct integration methods have been used to solve the 3D-elasticity equations in time and space domains. The effects of power law exponents and different boundary conditions on the behavior of FGM annular sector plate have been investigated. Results show that using 2D-FGMs and graded elements have superiority over the homogenous elements and 1D-FGMs. The model has been compared with the result of a 1D-FGM annular sector plate and it shows good agreement.

Keywords

References

  1. Aghdam, M.M., Shahmansouri, N. and Mohammadi, M. (2010), "Extended Kantorovich method for rstatic analysis of moderately thick functionally graded sector plates", Math. Comput. Simul., DOI: 10.1016/j.matcom.2010.07.029
  2. Asemi, K., Salehi, M. and Akhlaghi, M. (2010), "Dynamic analysis of a functionally graded thick truncated cone with finite length", Int. J. Mech. Mater. Des., 6, 367-378. https://doi.org/10.1007/s10999-010-9144-0
  3. Asemi, K., Akhlaghi, M., Salehi, M. and Hosseini Zad, S.K. (2011), "Analysis of functionally graded thick truncated cone with finite length under hydrostatic internal pressure", Arch. Appl. Mech., 81, 1063-1074. https://doi.org/10.1007/s00419-010-0472-1
  4. Asemi, K., Salehi, M. and Akhlaghi, M. (2011), "Elastic solution of a two-dimensional functionally graded thick truncated cone with finite length under hydrostatic combined loads", Acta Mech., 217(1-2), 119-134. https://doi.org/10.1007/s00707-010-0380-z
  5. Asemi, K., Akhlaghi, M. and Salehi, M. (2012), "Dynamic analysis of thick short FGM cylinders", Meccanica, 47(6), 1441-1453. https://doi.org/10.1007/s11012-011-9527-9
  6. Asgari, M., Akhlaghi, M. and Hosseini, S.M. (2009), "Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading", Acta Mech., 208(3-4), 163-180. https://doi.org/10.1007/s00707-008-0133-4
  7. Asgari, M. and Akhlaghi, M. (2010), "Transient thermal stresses in two-dimensional functionally graded thick hollow cylinder with finite length", Arch. Appl. Mech., 80(4), 353-376. https://doi.org/10.1007/s00419-009-0321-2
  8. Asgari, M., Akhlaghi, M. (2011), "Natural frequency analysis of 2D-FGM thick hollow cylinder based on three-dimensional elasticity equations", Eur. J. Mech. A/Solid., 30, 72-81 https://doi.org/10.1016/j.euromechsol.2010.10.002
  9. Behravan Rad, A. (2012), "Static response of 2-D functionally graded circular plate with gradient thickness and elastic foundations to compound loads", Struct. Eng. Mech., 44(2), 139-161. https://doi.org/10.12989/sem.2012.44.2.139
  10. Behravan Rad, A. and Shariyat, M. (2013), "A three-dimensional elasticity solution for two-directional FGM annular plates with non-uniform elastic foundations subjected to normal and shear tractions", Acta Mechanica Solida Sinica, 26(6), 671-690. https://doi.org/10.1016/S0894-9166(14)60010-0
  11. Bian, Z.G. and Wang, Y.H. (2013), "Axisymmetrical bending of single-and multi-span functionally graded hollow cylinders", Struct. Eng. Mech., 45(3), 355-371. https://doi.org/10.12989/sem.2013.45.3.355
  12. Dong, C.Y. (2008), "Three-dimensional free vibration analysis of functionally graded annular plates using the Chebyshev-Ritz method", Mater. Des., 29, 1518-1525 https://doi.org/10.1016/j.matdes.2008.03.001
  13. Eslami, M.R. (2003), A First Course in Finite Element Analysis, First Edition, Amirkabir University of Technology, Tehran publication Press.
  14. Ghannad, M., Zamani Nejad, M., Rahimi, G.H. and Sabouri, H. (2012), "Elastic analysis of pressurized thick truncated conical shells made of functionally graded materials", Struct. Eng. Mech., 43(1), 105-126. https://doi.org/10.12989/sem.2012.43.1.105
  15. Goupee, A.J. and Vel, S.S. (2006), "Two-dimensional optimization of material composition of functionally graded materials using mesh less analyses and a genetic algorithm", Comput. Meth. Appl. Mech. Eng., 195(44-47), 5926-5948. https://doi.org/10.1016/j.cma.2005.09.017
  16. Jodaei, A., Jalal, M. and Yas, M.H. (2012), "Free vibration analysis of functionally graded annular plates by state-space based differential quadrature method and comparative modeling by ANN", Compos. Part B, 43, 340-353 https://doi.org/10.1016/j.compositesb.2011.08.052
  17. Kim, J.H. and Paulino, G.H. (2002), "Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials", J. Appl. Mech., 69(4), 502-514. https://doi.org/10.1115/1.1467094
  18. Lei, Z. and Zheng, Z. (2009), "Exact solution for axisymmetric bending of functionally graded circular plate", Tsinghua Sci. Technol., 14, 64-68. https://doi.org/10.1016/S1007-0214(10)70033-X
  19. Li, X.Y., Ding, H.J. and Chen, W.Q. (2006), "Pure bending of simply supported circular plate of transversely isotropic functionally graded material", J. Zhejiang Univ. Sci. A, 7, 1324-1328. https://doi.org/10.1631/jzus.2006.A1324
  20. Li, X.Y., Ding, H.J. and Chen, W.Q. (2008), "Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load qrk", Int. J. Solid. Struct., 45, 191-210. https://doi.org/10.1016/j.ijsolstr.2007.07.023
  21. Li, X.Y., Ding, H.J. and Chen, W.Q. (2008), "Axisymmetric elasticity solutions for a uniformly loaded annular plate of transversely isotropic functionally graded materials", Acta Mech., 196, 139-159. https://doi.org/10.1007/s00707-007-0498-9
  22. Lu, C.F., Chen, W.Q., Xu, R.Q. and Lim, C.W. (2008), "Semi-analytical elasticity solutions for bidirectional functionally graded beams", Int. J. Solid. Struct., 45(1), 258-275. https://doi.org/10.1016/j.ijsolstr.2007.07.018
  23. Nemat-Alla, M. (2009), "Reduction of thermal stresses by composition optimization of two-dimensional functionally graded materials", Acta Mech., 208(3-4), 147-161. https://doi.org/10.1007/s00707-008-0136-1
  24. Nie, G. and Zhong, Z. (2007), "Axisymmetric bending of two-directionall functionally graded circular and annular plates", Acta Mechanica Solida Sinica, 20(4), 289-295. https://doi.org/10.1007/s10338-007-0734-9
  25. Nie, G.J. and Zhong, Z. (2008), "Vibration analysis of functionally graded annular sectorial plates with simply supported radial edges", Compos. Struct., 84, 167-176. https://doi.org/10.1016/j.compstruct.2007.07.003
  26. Nosier, A. and Fallah, F. (2008), "Reformulation of Mindlin-Reissner governing equations of functionally graded circular plates", Acta Mech., 198, 209-233. https://doi.org/10.1007/s00707-007-0528-7
  27. Rahmati Nezhad, Y., Asemi, K. and Akhlaghi, M. (2011), "Transient solution of temperature field in functionally graded hollow cylinder with finite length using multi layered approach", Int. J. Mech. Mater. Des., 7, 71-82. https://doi.org/10.1007/s10999-011-9151-9
  28. Reddy, J.N., Wang, C.M. and Kitiporncha, S. (1999), "Axisymmetric bending of functionally graded circular and annular plates", Eur. J. Mech. A/Solid., 18, 185-199. https://doi.org/10.1016/S0997-7538(99)80011-4
  29. Sadd, M.H. (2005), Elasticity Theory, Applications, and Numerics, Elsevier Butterworth-Heinemann, Burlington, MA.
  30. Saidi, A.R., Hasani Baferani, A. and Jomehzadeh, E. (2011), "Benchmark solution for free vibration of functionally graded moderately thick annular sector plates", Acta Mech., 219, 309-335. https://doi.org/10.1007/s00707-011-0459-1
  31. Santare, M.H. and Lambros, J. (2000), "Use of Graded Finite Elements to Model the Behavior of Nonhomogeneous Materials", J. Appl. Mech., 67(4), 819-22. https://doi.org/10.1115/1.1328089
  32. Santare, M.H., Thamburaj, P. and Gazonas, G.A. (2003), "The use of graded finite elements in the study of elastic wave propagation in continuously nonhomogeneous materials", Int. J. Solid. Struct., 40(21), 5621-5634. https://doi.org/10.1016/S0020-7683(03)00315-9
  33. Sburlati, R. and Bardella, L. (2011), "Three-dimensional elastic solutions for functionally graded circular plates", Eur. J. Mech. A/Solid., 30, 219-235. https://doi.org/10.1016/j.euromechsol.2010.12.008
  34. Shariyat, M. and Alipour, M.M. (2011), "Differential transform vibration and modal stress analyses of circular plates made of two-directional functionally graded materials resting on elastic foundations", Arch. Appl. Mech., 81(9), 1289-1306. https://doi.org/10.1007/s00419-010-0484-x
  35. Sobhani Aragh, B. and Hedayati, H. (2012), "Static response and free vibration of two-dimensional functionally graded metal/ceramic open cylindrical shells under various boundary conditions", Acta Mech., 223(2), 309-330. https://doi.org/10.1007/s00707-011-0563-2
  36. Tahouneh, V. and Yas M.H. (2012), "3-D free vibration analysis of thick functionally graded annular sector plates on Pasternak elastic foundation via 2-D differential quadrature method", Acta Mechanica, 223(9), 1879-1897. https://doi.org/10.1007/s00707-012-0648-6
  37. Tajeddini, V., Ohadi, A. and Sadighi, M. (2011), "Three-dimensional free vibration of variable thickness thick circular and annular isotropic and functionally graded plates on Pasternak foundation", Int. J. Mech. Sci., 53, 300-308 https://doi.org/10.1016/j.ijmecsci.2011.01.011
  38. Yas, M.H., Sobhani Aragh, B. and Heshmati, M. (2011), "Three-dimensional free vibration analysis of functionally graded fiber reinforced cylindrical panels using differential quadrature method", Struct. Eng. Mech., 37(5), 529-542. https://doi.org/10.12989/sem.2011.37.5.529
  39. Yun, W., Rongqiao, X. and Haojiang, D. (2010), "Three-dimensional solution of axisymmetric bending of functionally graded circular plates", Compos. Struct., 92, 1683-1693. https://doi.org/10.1016/j.compstruct.2009.12.002
  40. Zhang, Z. and Paulino, G.H. (2007), "Wave propagation and dynamic analysis of smoothly graded heterogeneous continua using graded finite elements", Int. J. Solid. Struct., 44(11-12), 3601-3626. https://doi.org/10.1016/j.ijsolstr.2005.05.061
  41. Zienkiewicz, O.C. and Taylor, R.L. (2005), The Finite Element Method for Solid and Structural Mechanics, Sixth Edition, Elsevier Butterworth-Heinemann, Oxford.

Cited by

  1. Free vibration analysis of FG plates resting on the elastic foundation and based on the neutral surface concept using higher order shear deformation theory vol.10, pp.5, 2016, https://doi.org/10.12989/eas.2016.10.5.1033
  2. Natural vibration of the three-layered solid sphere with middle layer made of FGM: three-dimensional approach vol.57, pp.2, 2016, https://doi.org/10.12989/sem.2016.57.2.239
  3. Three-dimensional analysis of the natural vibration of the three-layered hollow sphere with middle layer made of FGM vol.61, pp.5, 2014, https://doi.org/10.12989/sem.2017.61.5.563