Structural Engineering and Mechanics

  • 제51권6호
  • /
  • Pages.1017-1036
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Improving buckling response of the square steel tube by using steel foam

  • Moradi, Mohammadreza (Department of Civil and Environmental Engineering, Old Dominion University) ;
  • Arwade, Sanjay R. (Department of Civil and Environmental Engineering, University of Massachusetts)
  • 투고 : 2012.10.15
  • 심사 : 2014.07.02
  • 발행 : 2014.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

Steel tubes have an efficient shape with large second moment of inertia relative to their light weight. One of the main problems of these members is their low buckling resistance caused from having thin walls. In this study, steel foams with high strength over weight ratio is used to fill the steel tube to beneficially modify the response of steel tubes. The linear eigenvalue and plastic collapse FE analysis is done on steel foam filled tube under pure compression and three point bending simulation. It is shown that steel foam improves the maximum strength and the ability of energy absorption of the steel tubes significantly. Different configurations with different volume of steel foam and composite behavior is investigated. It is demonstrated that there are some optimum configurations with more efficient behavior. If composite action between steel foam and steel increases, the strength of the element will improve, in a way that, the failure mode change from local buckling to yielding.

키워드

참고문헌

  1. Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J. and Wadley, H. (2000), Metal Foams: A Design Guide, Butterworth-Heinemann, Elsevier Science (USA).
  2. Chacon, R., Mirambell, E. and Real, E. (2013), "Strength and ductility of concrete-filled tubular piers of integral bridges", J. Construct. Steel Res., 46, 234-246.
  3. Chajes, A. (1974), Principles of Structural Stability Theory, Prentice-Hall.
  4. Chen, C.C., Ko, J.W., Huang, G. and Chang, Y.M. (2012), "Local buckling and concrete confinement of concrete-filled box columns under axial load", J. Construct. Steel Res., 78, 1836-1845.
  5. Chitawadagi, M. and Narasimhan, M. (2009), "Strength deformation behavior of circular concrete filled steel tubes subjected to pure bending", J. Construct. Steel Res., 65(8-9), 1836-1845. https://doi.org/10.1016/j.jcsr.2009.04.006
  6. Furlong, R.W. (1967), "Strength of steel-encased concrete beam-columns", J. Struct. Div., ASCE 93(5), 113-124.
  7. GB50018, (2002), Technical code of cold-formed thin-wall steel structures. (in Chinese)
  8. Gibson, L. and Ashby, M. (1999), Cellular Solides: Structure and Properties, Second Edition, Cambridge University Press, Cambridge, United Kingdom.
  9. Graves Smith, T.R. (1971), "The effect of initial imperfections on the strength of thin-walled box columns", Int. J. Mech. Sci., 13, 911-925. https://doi.org/10.1016/0020-7403(71)90077-4
  10. Han, L.H. (2004), "Flexural behaviour of concrete-filled steel tubes", J. Construct. Steel Res., 60(2), 313-337. https://doi.org/10.1016/j.jcsr.2003.08.009
  11. Kremer, K., Liszkiewicz, A. and Adkins, J. (2004), Development of Steel Foam Materials and Structures, by Fraunhofer USA, Delaware, October.
  12. Lu, F.W., Li, S.P., Li, D.W. and Sun, G. (2007), "Flexural behavior of concrete filled non-uni-thickness walled rectangular steel tube", J. Construct. Steel Res., 63(8), 1051-1057. https://doi.org/10.1016/j.jcsr.2006.09.006
  13. Moradi, M., Arwade, S.R. and Schafer, B.W. (2013) "Computational evaluation of limit states of thin-walled channels made from steel foam", Thin Wall. Struct., 62, 206-214. https://doi.org/10.1016/j.tws.2012.07.007
  14. Prion, H.G.L. and Boehme, J. (1994), "Beam-column behavior of steel tubes filled with high strength concrete", Can. J. Civil Eng., 21, 207-218. https://doi.org/10.1139/l94-024
  15. Schafer, B.W. and Adany, S. (2006), "Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods" Eighteenth International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL, October.
  16. Schafer, B.W. and Pekoz, T. (1998), "Computational modeling of cold-formed steel: characterizing geometric imperfections and residual stresses", J. Construct. Steel Res., 47, 193- 210. https://doi.org/10.1016/S0143-974X(98)00007-8
  17. Schneider, S.P. (1998), "Axially loaded concrete-filled steel tubes", J. Struct. Eng., 124(10), 1125-1138. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:10(1125)
  18. Seide, P. (1958), "Compressive buckling of a long simply supported plate on an elastic foundation", J. Aeronaut. Sci., 27, 382-392.
  19. Shakir-Khalil, H. and Mouli M. (1990), "Further tests on concrete-filled rectangular hollow-section columns", Struct. Eng., 68(20), 405-413.
  20. Smith, B.H., Szyniszewski, S., Hajjar, J.F., Schafer, B.W. and Arwade, S.R. (2012) "A review of steel foam processing, properties, and applications", J. Construct. Steel Res., 71, 1-10 https://doi.org/10.1016/j.jcsr.2011.10.028
  21. Szyniszewski, S., Smith, B.H., Hajjar, J.F., Arwade, S.R., Schafer, B.W. (2012), "Local buckling strength of steel foam sandwich panels", Thin Wall. Struct., 59, 11-19. https://doi.org/10.1016/j.tws.2012.04.014
  22. Tao Z., Uy B., Han L. and Wang Z. (2009), "Analysis and design of concrete-filled stiffened thin- walled steel tubular columns under axial compression", Thin Wall. Struct., 47, 1544-1556. https://doi.org/10.1016/j.tws.2009.05.006
  23. Varma, A.H., Ricles, J.M., Sause, R. and Lu, L.W. (2002), "Seismic behaviour and modeling of highstrength composite concrete-filled steel tube (CFT) beam-columns", J. Construct. Steel Res., 58(5-8), 725-758. https://doi.org/10.1016/S0143-974X(01)00099-2

피인용 문헌

  1. Structural response of composite concrete filled plastic tubes in compression vol.21, pp.3, 2016, https://doi.org/10.12989/scs.2016.21.3.589
  2. Seagull feather shaft: Correlation between structure and mechanical response vol.48, 2017, https://doi.org/10.1016/j.actbio.2016.11.006
  3. Metal Foam-Filled Tubes as Plastic Dissipaters in Earthquake-Resistant Steel Buildings vol.416, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/416/1/012051
  4. Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium vol.66, pp.6, 2014, https://doi.org/10.12989/sem.2018.66.6.737
  5. The cyclic behavior of steel-polyoxymethylene composite braces vol.70, pp.5, 2014, https://doi.org/10.12989/sem.2019.70.5.591
  6. Finite element simulation for steel tubular members strengthened with FRP under compression vol.72, pp.5, 2019, https://doi.org/10.12989/sem.2019.72.5.569
  7. On the design of structural wing members for an unmanned weight-shift aircraft vol.8, pp.3, 2014, https://doi.org/10.1139/juvs-2019-0012