DOI QR코드

DOI QR Code

Displacements and stresses in pressurized thick FGM cylinders with exponentially varying properties based on FSDT

  • Ghannad, Mehdi (Department of Mechanical Engineering, Shahrood University of Technology) ;
  • Gharooni, Hamed (Department of Mechanical Engineering, Shahrood University of Technology)
  • 투고 : 2012.04.24
  • 심사 : 2014.05.18
  • 발행 : 2014.09.25

초록

Using the infinitesimal theory of elasticity and analytical formulation based on the first-order shear deformation theory (FSDT) is presented for axisymmetric thick-walled cylinders made of functionally graded materials under internal and/or external uniform pressure. The material is assumed to be isotropic heterogeneous with constant Poisson's ratio and radially exponentially varying elastic modulus. At first, general governing equations of the FGM thick cylinders are derived by assumptions of the FSDT. Then the obtained equations are solved under the generalized clamped-clamped conditions. The results are compared with the findings of both FSDT and finite element method (FEM).

키워드

참고문헌

  1. Eipakchi, H.R., Rahimi, G.H. and Khadem, S.E. (2003), "Closed form solution for displacements of thick cylinders with varying thickness subjected to nonuniform internal pressure", Struct. Eng. Mech., 16(6), 731-748. https://doi.org/10.12989/sem.2003.16.6.731
  2. Eipakchi, H.R., Khadem, S.E. and Rahimi, G.H. (2008), "Axisymmetric stress analysis of a thick conical shell with varying thickness under nonuniform internal pressure", J. Eng. Mech., 134, 601-610. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:8(601)
  3. Fukui, Y. and Yamanaka, N. (1992), "Elastic analysis for thick-walled tubes of functionally graded materials subjected to internal pressure", JSME, Ser. I, 35(4), 891-900.
  4. Ghannad, M. and Zamani Nejad, M. (2010), "Elastic analysis of pressurized thick hollow cylindrical shells with clamped-clamped ends", Mechanika, 5(85), 11-18.
  5. Ghannad, M. and Zamani Nejad, M. (2012), "Complete elastic solution of pressurized thick cylindrical shells made of heterogeneous functionally graded materials", Mechanika, 18(6), 640-649.
  6. Greenspon, J.E. (1960), "Vibration of a thick-walled cylindrical shell, comparison of the exact theory with approximate theories", J. Acoust. Soc. Am., 32(5), 571-578. https://doi.org/10.1121/1.1908148
  7. Hongjun, X., Zhifei, S. and Taotao, Z. (2006), "Elastic analyses of heterogeneous hollow cylinders", J. Mech., Res. Commun., 33(5), 681-691. https://doi.org/10.1016/j.mechrescom.2006.01.005
  8. Mirsky, I. and Hermann, G. (1958), "Axially motions of thick cylindrical shells", J. Appl. Mech. Tran. ASME, 25, 97-102.
  9. Simkins, T.E. (1994), "Amplifications of flexural waves in gun tubes", J. Sound Vib., 172(2), 145-154. https://doi.org/10.1006/jsvi.1994.1166
  10. Tutuncu, N. (2007), "Stresses in thick-walled FGM cylinders with exponentially-varying properties", J. Eng. Struct., 29, 2032-2035. https://doi.org/10.1016/j.engstruct.2006.12.003
  11. Vlachoutsis, S. (1992), "Shear correction factors for plates and shells", Int. J. Numer. Math. Eng., 33, 1537-1552. https://doi.org/10.1002/nme.1620330712
  12. Zamaninejad, M., Rahimi, G.H. and Ghannad, M. (2009), "Set of field equations for thick shell of revolution made of functionally graded materials in curvilinear coordinate system", Mechanika, 3(77), 18-26.
  13. Zhifei, S., Taotao, Z. and Hongjun, X. (2007), "Exact solutions of heterogeneous elastic hollow cylinders", Compos. Struct., 79(1), 140-147. https://doi.org/10.1016/j.compstruct.2005.11.058

피인용 문헌

  1. Magneto-thermo-elastic response of a rotating functionally graded cylinder vol.56, pp.1, 2015, https://doi.org/10.12989/sem.2015.56.1.137