Structural Engineering and Mechanics

  • 제51권6호
  • /
  • Pages.923-937
  • /
  • 2014
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Rational finite element method for plane orthotropic elastic problems

  • Mao, Ling (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology) ;
  • Yao, Weian (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology) ;
  • Gao, Qiang (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology) ;
  • Zhong, Wanxie (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology)
  • 투고 : 2012.09.03
  • 심사 : 2014.05.12
  • 발행 : 2014.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The rational finite element method is different from the standard finite element method, which is constructed using basic solutions of the governing differential equations as interpolation functions in the elements. Therefore, it is superior to the isoparametric approach because of its obvious physical meaning and accuracy; it has successfully been applied to the isotropic elasticity problem. In this paper, the formulation of rational finite elements for plane orthotropic elasticity problems is deduced. This method is formulated directly in the physical domain with full consideration of the requirements of the patch test. Based on the number of element nodes and the interpolation functions, different approaches are applied with complete polynomial interpolation functions. Then, two special stiffness matrixes of elements with four and five nodes are deduced as a representative application. In addition, some typical numerical examples are considered to evaluate the performance of the elements. The numerical results demonstrate that the present method has a high level of accuracy and is an effective technique for solving plane orthotropic elasticity problems.

키워드

참고문헌

  1. Areias, P.M.A. and Belytschko, T. (2005), "Analysis of three-dimensional crack initiation and propagation using extended finite element method", Int. J. Numer. Meth. Eng., 63(8), 760-788. https://doi.org/10.1002/nme.1305
  2. Bambill, D.V., Rossit, C.A. and Susca, A. (2009), "Numerical experiments on the determination of stress concentration factors in orthotropic perforated plates subjected to in - plane loading", Struct. Eng. Mech., 32(4), 549-561. https://doi.org/10.12989/sem.2009.32.4.549
  3. Beom, H.G., Cui, C.B. and Jang, H.S. (2012), "Application of an orthotropy rescaling method to edge cracks and kinked cracks in orthotropic two-dimensional solids", Int. J. Eng. Sci., 51, 14-31. https://doi.org/10.1016/j.ijengsci.2011.11.005
  4. Cen, S., Chen, X.M., Li, C.F. and Fu, X.R. (2009), "Quadrilateral membrane elements with analytical element stiffness matrices formulated by the new quadrilateral area coordinate method (QACM-II)", Int. J. Numer. Meth. Eng., 77(8), 1172-1200. https://doi.org/10.1002/nme.2459
  5. Cen, S., Fu, X.R., Zhou, G.H., Zhou, M.J. and Li, C.F. (2011), "Shape-free finite element method: the plane hybrid stress-function (HS-F) element method for anisotropic materials", Sci. China, Ser G, 54(4), 653-665. https://doi.org/10.1007/s11433-011-4272-6
  6. Cen, S., Zhou, G.H. and Fu, X.R. (2012), "A shape-free 8-node plane element unsymmetric analytical trial function method", Int. J. Numer. Meth. Eng., 91(2), 158-185. https://doi.org/10.1002/nme.4260
  7. Duarte, C.A., Babuska, I. and Oden, J.T. (2000), "Generalized finite element methods for three dimensional structural mechanics problems", Comput. Struct., 77(2), 215-232. https://doi.org/10.1016/S0045-7949(99)00211-4
  8. Fu, X.R, Cen, S., Li, C.F. and Chen, X.M. (2010), "Analytical trial function method for development of new 8-node plane element based on the variational principle containing Airy stress function", Eng. Comput., 27(4), 442-463. https://doi.org/10.1108/02644401011044568
  9. Hambli, R., Bettamer, A. and Allaoui, S. (2012), "Finite element prediction of proximal femur fracture pattern based on orthotropic behavior law coupled to quasi-brittle damage", Med. Eng. Phys., 34(2), 2-10. https://doi.org/10.1016/j.medengphy.2011.06.010
  10. Ji, Z., Liu, Z.J. and Zhao, W. (2000), "8-Node curve quadrilateral rational finite element", J. Dalian Univ. Technol., 40(1), 40-44. (in Chinese)
  11. Ji, Z. and Zhong, W.X. (1997), "Rational plane quadrilateral four and five nodes finite elements", Chin. J. Comput. Mech., 14(1), 19-27. (in Chinese)
  12. Jirousek, J. and Venkatesh, A. (1992), "Hybrid trefftz plane elasticity elements with p-method capabilities", Int. J. Numer. Meth. Eng., 35(7), 1443-1472. https://doi.org/10.1002/nme.1620350705
  13. Karihaloo, B.L. and Xiao, Q.Z. (2003), "Modeling of stationary and growing cracks in FE framework without remeshing: a state of the art review", Comput. Struct., 81(3), 119-129. https://doi.org/10.1016/S0045-7949(02)00431-5
  14. Long, Y.Q. and Xu, Y. (1994), "Generalized conforming quadrilateral membrane element with vertex rigid rotational freedom", Comput. Struct., 52(4), 749-755. https://doi.org/10.1016/0045-7949(94)90356-5
  15. Long, Y.Q., Cen, S. and Long, Z.F. (2009), Advanced Finite Element Method in Structural Engineering, Springer-Verlag GmbH, Berlin Heidelberg, Germany, Tsinghua University Press, Beijing, China.
  16. Melenk, J.M. and Babuska, I. (1996), "The partition of unity method: basic theory and applications", Comput. Meth. Appl. Mech. Eng., 139(1), 289-314. https://doi.org/10.1016/S0045-7825(96)01087-0
  17. Ozaki, S., Hikida, K. and Hashiguchi K. (2012), "Elastoplastic formulation for friction with orthotropic anisotropy and rotational hardening", Int. J. Solid. Struct., 49(3), 648-57. https://doi.org/10.1016/j.ijsolstr.2011.11.010
  18. Simone, A., Duarte, C.A. and Van der Giessen, E. (2006), "A generalized finite element method for polycrystals with discontinuous grain boundaries", Int. J. Numer. Meth. Eng., 67(8), 1122-1145. https://doi.org/10.1002/nme.1658
  19. Turner, M.J., Clough, R.W., Martin, H.C. and Topp, L.C. (1956), "Stiffness and deflections analysis of complex structures", J. Aeronaut. Sci., 23(9), 805-809. https://doi.org/10.2514/8.3664
  20. Venkatseh, A. and Jirousek, J. (1995), "Accurate representation of local-effects due to concentrated and discontinuous loads in hybrid-trefftz plate-bending elements", Comput. Struct., 57(5), 863-870. https://doi.org/10.1016/0045-7949(95)00082-R
  21. Wang, Y.F. and Zhong, W.X. (2002), "Plane 8-node rational finite element", Chin. J. Comput. Mech., 23(1), 109-114. (in Chinese)
  22. Wang, Y.F. and Zhong, W.X. (2003), "A rational hexahedron 8-node finite element", Acta Mech. Sin., 20(3), 131-135. (in Chinese)
  23. Xue, W.M., Karlovitz, L.A. and Atluri, S.N. (1985), "On the existence and stability conditions for mixed-hybrid finite element solutions based on Reissner's variational principle", Int. J. Solid. Struct., 21(1), 97-116. https://doi.org/10.1016/0020-7683(85)90107-6
  24. Zhong, W.X. (1997), "Convergence of FEM and the conditions of patch test", Chin. J. Comput. Mech., 14(3), 251-262. (in Chinese)
  25. Zhong, W.X. and Ji, Z. (1996), "Rational finite element", Comput. Struct. Mech. Appl., 13(1), 1-8. (in Chinese)
  26. Zhong, W.X. and Ji, Z. (1997), "The convergence proof of the plane rational finite element", Acta Mech. Sin., 29(6), 676-685.