DOI QR코드

DOI QR Code

Flutter analysis by refined 1D dynamic stiffness elements and doublet lattice method

  • Pagani, Alfonso (Department of Mechanical and Aerospace Engineering, Politecnico di Torino) ;
  • Petrolo, Marco (School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University) ;
  • Carrera, Erasmo (Department of Mechanical and Aerospace Engineering, Politecnico di Torino, SAMME, RMIT University)
  • Received : 2013.03.07
  • Accepted : 2013.06.07
  • Published : 2014.07.25

Abstract

An advanced model for the linear flutter analysis is introduced in this paper. Higher-order beam structural models are developed by using the Carrera Unified Formulation, which allows for the straightforward implementation of arbitrarily rich displacement fields without the need of a-priori kinematic assumptions. The strong form of the principle of virtual displacements is used to obtain the equations of motion and the natural boundary conditions for beams in free vibration. An exact dynamic stiffness matrix is then developed by relating the amplitudes of harmonically varying loads to those of the responses. The resulting dynamic stiffness matrix is used with particular reference to the Wittrick-Williams algorithm to carry out free vibration analyses. According to the doublet lattice method, the natural mode shapes are subsequently used as generalized motions for the generation of the unsteady aerodynamic generalized forces. Finally, the g-method is used to conduct flutter analyses of both isotropic and laminated composite lifting surfaces. The obtained results perfectly match those from 1D and 2D finite elements and those from experimental analyses. It can be stated that refined beam models are compulsory to deal with the flutter analysis of wing models whereas classical and lower-order models (up to the second-order) are not able to detect those flutter conditions that are characterized by bending-torsion couplings.

Keywords

References

  1. Albano, E. and Rodden, W.P. (1969), "A doublet-lattice method for calculating lift distributions on oscillating surfaces in subsonic flows", AIAA J., 7(2), 279-285. https://doi.org/10.2514/3.5086
  2. Banerjee, J.R. (2003), "A simplified method for the free vibration and flutter analysis of bridge decks", J. Sound Vib., 260(5), 829-845. https://doi.org/10.1016/S0022-460X(02)00929-X
  3. Butler, R. and Banerjee, J.R. (1996), "Optimum design of bending-torsion coupled beams with frequency or aeroelastic constraints", Comput. Struct., 60(5), 715-724. https://doi.org/10.1016/0045-7949(95)00451-3
  4. Berdichevsky, V.L., Armanios, E. and Badir, A. (1992), "Theory of anisotropic thin-walled closed-cross section beams", Compos. Part B. Eng., 2(5-7), 411-432. https://doi.org/10.1016/0961-9526(92)90035-5
  5. Carrera, E. (1995), "A class of two dimensional theories for multilayered plates analysis", Atti Accademia delle Scienze di Torino, Memorie Scienze Fisiche, 19-20, 49-87.
  6. Carrera, E. (2002), "Theories and finite elements for multilayered, anisotropic, composite plates and shells", Arch. Comput. Method. E., 9(2), 87-140. https://doi.org/10.1007/BF02736649
  7. Carrera, E. (2003), "Theories and finite elements for multilayered plates and shells: A unified compact formulation with numerical assessment and benchmarking", Arch. Comput. Method. E, 10(3), 216-296.
  8. Carrera, E., Giunta, G. and Petrolo, M. (2011), Beam Structures: Classical and Advanced Theories, John Wiley & Sons.
  9. Carrera, E., Petrolo, M. and Zappino, E. (2012), "Performance of CUF approach to analyze the structural behavior of slender bodies", J. Struct. Eng-ASCE, 138(2), 285-297. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000402
  10. Chen, P.C. (2000), "Damping perturbation method for flutter solution: The g-method", AIAA J., 38(9), 1519-1524. https://doi.org/10.2514/2.1171
  11. Demasi, L. and Livne, E. (2009), "Dynamic aeroelasticity of structurally nonlinear configurations using linear modally reduced aerodynamic generalized forces", AIAA J., 47(1), 71-90.
  12. Dong, S.B., Alpdongan, C. and Taciroglu, E. (2010), "Much ado about shear correction factors in Timoshenko beam theory", Int. J. Solids Struct., 47(13), 1651-1665. https://doi.org/10.1016/j.ijsolstr.2010.02.018
  13. El Fatmi, R. (2007), "Non-uniform warping including the effects of torsion and shear forces. Part I: A General beam theory", Int. J. Solids Struct., 44(18-19), 5912-5929. https://doi.org/10.1016/j.ijsolstr.2007.02.006
  14. Euler, L. (1744), De Curvis Elasticis, Lausanne and Geneva, Bousquet..
  15. Guo, S.J., Banerjee, J.R. and Cheung, C.W. (2003), "The effect of laminate lay-up on the flutter speed of composite wings", Proceedings of the Institution of Mechanical Engineers, Part G: J. Aerospace Eng,, 217(3), 115-122.
  16. Harder, R.L. and Desmarais, R.N. (1972), "Interpolation using surface splines", J. Aircraft, 9(2), 189-192. https://doi.org/10.2514/3.44330
  17. Hollowell S.J. and Dugundji, J. (1984), "Aeroelastic flutter and divergence of stiffness coupled, graphite/epoxy cantilevered plates", J. Aircraft, 21(1), 69-76. https://doi.org/10.2514/3.48224
  18. Kameyama, M. and Fukunaga, H. (2007), "Optimum design of composite plate wings for aeroelastic characteristics using lamination parameters", Comput. Struct., 85(3-4), 213-224. https://doi.org/10.1016/j.compstruc.2006.08.051
  19. Kaneko, T. (1975), "On Timoshenko's correction for shear in vibrating beams", J. Phys. D. Appl. Phys., 8(16), 1927-1936. https://doi.org/10.1088/0022-3727/8/16/003
  20. Kapania, K. and Raciti, S. (1989a), "Recent advances in analysis of laminated beams and plates, Part I: shear effects and buckling", AIAA J., 27(7), 923-935. https://doi.org/10.2514/3.10202
  21. Kapania, K. and Raciti, S. (1989b), "Recent advances in analysis of laminated beams and plates, Part II: vibrations and wave propagation", AIAA J., 27(7), 935-946. https://doi.org/10.2514/3.59909
  22. Katz, J. and Plotkin, A. (1991), Low-Speed Aerodynamics: From Wing Theory to Panel Methods, McGraw-Hill, Inc., New York.
  23. Koo, K.N. (2001), "Aeroelastic characteristics of double-swept isotropic and composite wings", J. Aircraft, 38(2), 343-348. https://doi.org/10.2514/2.2767
  24. Ladeveze, P., Sanchez, P. and Simmonds, J. (2004), "Beamlike (Saint-Venant) solutions for fully anisotropic elastic tubes of arbitrary closed cross-section", Int. J. Solids Struct., 41(7), 1925-1944. https://doi.org/10.1016/j.ijsolstr.2003.11.006
  25. Landahl, M.T. (1967), "Kernel function for nonplanar oscillating surfaces in a subsonic flow", AIAA J., 5(5), 1045-1046. https://doi.org/10.2514/3.55319
  26. Librescu, L and Song, O. (1992), "On the static aeroelastic tailoring of composite aircraft swept wings modelled as thin-walled beam structures", Compos. Eng., 2(5-7), 497-512. https://doi.org/10.1016/0961-9526(92)90039-9
  27. Lillico, M., Butler, R., Guo, S. and Banerjee, J.R. (1997), "Aeroelastic optimisation of composite wings using the dynamic stiffness method". Aeronaut. J., 101(1002), 77-86.
  28. Novozhilov, V.V. (1961), Theory of Elasticity, Pergamon Press, Oxford, 1961.
  29. Pagani, A., Boscolo, M., Banerjee, J.R. and Carrera, E. (2013), "Exact dynamic stiffness elements based on one dimensional higher-order theories for free vibration analysis of solid and thin-walled structures", J. Sound Vib., 332(23), 6104-6127. DOI: 10.1016/j.jsv.2013.06.023.
  30. Pagani, A., Carrera, E., Boscolo, M. and Banerjee, J.R. (2014), "Refined dynamic stiffness elements applied to free vibration analysis of generally laminated composite beams with arbitrary boundary conditions", Compos. Struct., 110, 305-316. DOI: 10.1016/j.compstruct.2013.12.010.
  31. Petrolo, M. (2012), "Advanced 1D structural models for flutter analysis of lifting surfaces", Int. J. Aeronautical Space Sci., 13(2), 199-209. https://doi.org/10.5139/IJASS.2012.13.2.199
  32. Petrolo, M. (2013), "Flutter analysis of composite lifting surfaces by the 1D Carrera unified formulation and the doublet lattice method", Compos. Struct., 95(8), 539-546. https://doi.org/10.1016/j.compstruct.2012.06.021
  33. Petrolo, M., Zappino, E. and Carrera, E. (2012), "Refined free vibration analysis of one-dimensional structures with compact and bridge-like cross-sections", Thin-Wall. Struct., 56, 49-61. https://doi.org/10.1016/j.tws.2012.03.011
  34. Rodden, W.P., Taylor, P.F. and McIntosh, S.C.J. (1998), "Further refinement of the subsonic doublet-lattice method", J. Aircraft, 35(5), 720-726. https://doi.org/10.2514/2.2382
  35. Schardt, R. (1994), "Generalized beam theory an adequate method for coupled stability problems", Thin-Wall. Struct., 19(2-4), 161-180. https://doi.org/10.1016/0263-8231(94)90027-2
  36. Schuster, D.M., Liu, D.D. and Huttsell L.J. (2003), "Computational aeroelasticity: Success, progress, challenge", J. Aircraft, 40(5), 843-856. https://doi.org/10.2514/2.6875
  37. Silvestre, N. (2007), "Generalised beam theory to analyse the buckling behaviour of circular cylindrical shells and tubes", Thin-Wall. Struct., 45(2), 185-198. https://doi.org/10.1016/j.tws.2007.02.001
  38. Theodorsen, T. (1934), "General theory of aerodynamic instability and the mechanism of flutter", NACA Rept. 496.
  39. Timoshenko, S.P. (1922), "On the corrections for shear of the differential equation for transverse vibrations of prismatic bars", Philos. Mag., 41, 744-746.
  40. Timoshenko, S.P. and Goodier, J.N. (1970), Theory of Elasticity, McGraw-Hill.
  41. Varello, A., Carrera, E. and Demasi, L. (2011), "Vortex lattice method coupled with advanced one-dimensional structural models", J. Aeroelasticity Struct. Dyn., 2(2), 53-78.
  42. Volovoi, V.V., Hodges, D.H., Berdichevsky, V.L. and Sutyrin, V.G. (1999), "Asymptotic theory for static behaviour of elastic anisotropic I-beams", Int. J. Solids Struct., 36(7), 1017-1043. https://doi.org/10.1016/S0020-7683(97)00341-7
  43. Washizu, K. (1968), "Variational Methods in Elasticity and Plasticity", Pergamon, Oxford.
  44. Wittrick, W.H. and Williams, F.W. (1970), "A general algorithm for computing natural frequencies of elastic structures", Q. J. Mech. Appl. Math., 24(3), 263-284.
  45. Yu, W. and Hodges, D.H. (2004), "Elasticity solutions versus asymptotic sectional analysis of homogeneous, isotropic, prismatic beams", J. Appl. Mech., 71(1), 15-23. https://doi.org/10.1115/1.1640367
  46. Yurkovich, R. (2003), "Status of unsteady aerodynamic prediction for flutter of high-performance aircraft", J. Aircraft, 40(5), 832-842. https://doi.org/10.2514/2.6874

Cited by

  1. Aerodynamic and mechanical hierarchical aeroelastic analysis of composite wings vol.23, pp.9, 2016, https://doi.org/10.1080/15376494.2015.1121561
  2. Recent developments on refined theories for beams with applications vol.2, pp.2, 2015, https://doi.org/10.1299/mer.14-00298