DOI QR코드

DOI QR Code

Fabrication of mineral fiber via melt spinning method from blast furnace slag

  • Wang, Xiao-Song (Engineering Research Institute, Division of Nano and Advanced Materials Engineering, Gyeongsang National University) ;
  • Hur, Bo-Young (Engineering Research Institute, Division of Nano and Advanced Materials Engineering, Gyeongsang National University)
  • 투고 : 2014.07.15
  • 심사 : 2014.08.01
  • 발행 : 2014.08.31

초록

Mineral fiber, or be called mineral wool when it assembles in large amounts, is a kind of wide applied man-made material with excellent thermal and acoustic insulation properties. In this work, mineral fiber was produced via melt spinning method by using iron blast furnace slag as raw material. Two critical experimental parameters for fabrication were investigated: melt pouring temperature and rotating speed of spinning wheels. The mineral fiber produced under the condition of melt pouring temperature $1500^{\circ}C$ and spinning speed 4000 rpm, showed the smoother surface and most quality, while the others had rough surfaces or with heavy shots. In general, mineral fibers with the size in the range of $12{\sim}49{\mu}m$ in diameter and 8~130 mm in length can be fabricated by this method, and the production rate is more than 34 wt.%, which could be up to 57 wt.% at maximum.

키워드

참고문헌

  1. William D. Thornbury, "Mineral wool industry of the united states", Economic Geography 14(4) (1938) 398. https://doi.org/10.2307/141533
  2. T. Bajcar, B. Blagojevic, B. Sirok and M. Dular, "Influence of flow properties on a structure of a mineral wool primary layer", Exp. Therm. Fluid Sci. 32(2) (2007) 440. https://doi.org/10.1016/j.expthermflusci.2007.05.007
  3. M.A. Sultan and G. D. Lougheed, "Results of fire resistance tests on full scale gypsum board wall assemblies". Internal Report No. 833. (2002). Institute for Research in Construction, National Research Council Canada.
  4. H. Leslie Simmons and Harold B. Olin, "Chapter 7, thermal and moisture protection, construction: Principles, materials and methods", 7th ed. (John Wiley & Sons. Inc., 2001).
  5. T. Masumoto, I. Ohnaka, A. Inoue and M. Hagiwara, "Production of Pd-Cu-Si amorphous wires by melt spinning method using rotating water", Scripta Metallurgica. 15(3) (1981) 293. https://doi.org/10.1016/0036-9748(81)90347-1
  6. A. Giboult, J.Y. Aube and D. Sainte-foi, "Method of forming mineral fibers" (1992). U. S. Patent No. 5143532.
  7. F. Trdi , B. Sironk, P.R. Bullen and D.R. Philpott, "Monitoring mineral wool production using real-time machine vision", Real-Time Imaging. 5 (1999) 125.
  8. J.S. Szabo and T. Czigany, "Static fracture and failure behavior of aligned discontinuous mineral fiber reinforced polypropylene composites", Polymer Testing. 22 (2003) 711. https://doi.org/10.1016/S0142-9418(03)00005-9
  9. U.S. Environmental Protection Agency, "Materials Characterization Paper in Support of the Final Rulemaking: Identification of Nonhazardous Secondary Materials That Are Solid Waste Blast Furnace Slag - Used as ingredient in clinker manufacture", Sector Strategies Performance Report. Feb. (2011).
  10. Ultra Light Strength Foam Metal Laboratory, "Development of functional composite panel of metal foam with good environment", Research Report. July (2006). Ministry of Environment, South Korea.
  11. Victor I. Tkatch, Alexander I. Limanovskii, Sergey N. Denisenko and Sergey G. Rassolov, "The effect of the melt-spinning processing parameters on the rate of cooling", Mater. Sci. Eng., A. 323 (2002) 91. https://doi.org/10.1016/S0921-5093(01)01346-6