DOI QR코드

DOI QR Code

Statistical division of compressive strength results on the aspect of concrete family concept

  • Jasiczak, Jozef (Institute of Structural Engineering, Poznan University of Technology) ;
  • Kanoniczak, Marcin (Institute of Structural Engineering, Poznan University of Technology) ;
  • Smaga, Lukasz (Department of Probability Theory and Mathematical Statistics, Faculty of Mathematics and Computer Science Adam Mickiewicz University)
  • 투고 : 2013.10.28
  • 심사 : 2014.05.21
  • 발행 : 2014.08.25

초록

The article presents the statistical method of grouping the results of the compressive strength of concrete in continuous production. It describes the method of dividing the series of compressive strength results into batches of statistically stable strength parameters at specific time intervals, based on the standardized concept of "concrete family". The article presents the examples of calculations made for two series of concrete strength results, from which sets of decreased strength parameters were separated. When assessing the quality of concrete elements and concrete road surfaces, the principal issue is the control of the compressive strength parameters of concrete. Large quantities of concrete mix manufactured in a continuous way should be subject to continuous control. Standardized approach to assessing the concrete strength proves to be insufficient because it does not allow for the detection of subsets of the decreased strength results, which in turn makes it impossible to make adjustments to the concrete manufacturing process and to identify particular product or area on site with decreased concrete strength. In this article two independent methods of grouping the test results of concrete with statistically stable strength parameters were proposed, involving verification of statistical hypothesis based on statistical tests: Student's t-test and Mann - Whitney - U test.

키워드

참고문헌

  1. ACI 214R-11, Guide to Evaluation of Strength Test Results of Concrete.
  2. ACI 318-08, Building Code Requirements for Structural Concrete.
  3. Brunarski, L. (2008), Determination of Uncertainty of Strength Test Results. Guide, ITB, Warsaw, Poland.
  4. Caspeele, R. and Taerwe, L. (2007), "Conformity control of concrete based on the "concrete family" concept", Proceeding of the 5th International Probabilistic Control , Ghent, 241-252.
  5. Collective work under supervision of Professor Lech Czarnecki (2004), Concrete According to PN EN 206-1 Standard - Comments, Polski Cement, Krakow, Poland. (in polish)
  6. Day, K.W. (2006), Concrete Mix Design, Quality Control and Specification, Taylor & Francis, New York, USA.
  7. EN 1992:2004, Eurocode 2: Design of concrete structures.
  8. EN 206-1:2000, Concrete. Part 1: Specification, performance, production and conformity.
  9. Gebler, S.H. (1990), "Interpretation of quality - control charts for concrete production", ACI Mater. J., 4, 319-326.
  10. Gorecki, T. (2011), Statistics Basics with Examples in R, BTC, Legionowo, Poland.
  11. Harrison, T. (1999), "The use of concrete families in the control of concrete", Utilizing Ready Mix Concrete and Mortar. Proceedings of the International Conference , UK, Scotland, 269- 276.
  12. ISO 2394:2000, General principles on reliability for structures.
  13. ISO 8258:1996, Shewhart's control cards.
  14. Jasiczak, J. (1992), The Criteria of Stability Control of the Compressive Strength of Concrete Using Probabilistic Methods, WPP, Poznan, Poland. (in polish)
  15. Jasiczak, J. (2011), "Probabilistic criteria for the control of compressive strength stabilization in concrete", Found. Civil Environ.l Eng., 14, 47-61.
  16. Kanoniczak, M. (2011), "Strength control of concrete highway surface by using Shewhart's control charts", 57th Annual Conference on Scientific Problems of Civil Engineering, Krynica - Rzeszow, 09, 132-133.
  17. Konkol, J. and Prokopski, G. (2007), "The necessary number of profile lines for the analysis of concrete fracture surfaces", Struct. Eng. Mech., 25(6), 565-576. https://doi.org/10.12989/sem.2007.25.5.565
  18. Ping, L.J., Hong, S.G. and Yong G.L. (2010), "Use of "concrete family" concept for conformity control of ready mixed concrete", 35th Conference on Our World In Concrete & Structures, Singapore, 08.
  19. Sarja, A. (2000), "Durability design of cocnrete structures - Committee report 130-CSL", Mater. Struct., 33, 14-20. https://doi.org/10.1007/BF02481691
  20. Taerwe, L. (1999), "Basic aspect of quality control of concrete", Utilizing Ready Mix Concrete and Mortar Proceedings of the International Conference , UK, Scotland, 221- 235.
  21. Wolinski, S. (2006), "Assessment of concrete quality with standard methods and according to fuzzy logic", "Concrete Days" Conference (Wisla, 9 - 11.10.2006), Polski Cement, Krakow, Poland, 1121 -1131.