DOI QR코드

DOI QR Code

A Case Study of Prediction and Analysis of Unplanned Dilution in an Underground Stoping Mine using Artificial Neural Network

인공신경망을 이용한 지하채광 확정선외 혼입 예측과 분석 사례연구

  • Jang, Hyongdoo (Department of Mining and Metallurgy Engineering, Western Australian School of Mines, Curtin University) ;
  • Yang, Hyung-Sik (Energy & Mineral Resources Engineering, Chonnam National University)
  • Received : 2014.07.24
  • Accepted : 2014.08.11
  • Published : 2014.08.31

Abstract

Stoping method has been acknowledged as one of the typical metalliferous underground mining methods. Notwithstanding with the popularity of the method, the majority of stoping mines are suffering from excessive unplanned dilution which often becomes as the main cause of mine closure. Thus a reliable unplanned dilution management system is imperatively needed. In this study, reliable unplanned dilution prediction system is introduced by adopting artificial neural network (ANN) based on data investigated from one underground stoping mine in Western Australia. In addition, contributions of input parameters were analysed by connection weight algorithm (CWA). To validate the reliability of the proposed ANN, correlation coefficient (R) was calculated in the training and test stage which shown relatively high correlation of 0.9641 in training and 0.7933 in test stage. As results of CWA application, BHL (Length of blast hole) and SFJ (Safety factor of Joint orientation) show comparatively high contribution of 18.78% and 19.77% which imply that these are somewhat critical influential parameter of unplanned dilution.

스토핑 채광법은 현재 가장 보편적으로 이용되고 있는 지하 금속광 채광법 중 하나이다. 그러나 채광과정에서 발생하는 확정선외 혼입은 광산 전반의 생산성을 떨어뜨리며 때때로 폐광의 주요 원인을 제공하기도 하여 그 예측과 관리가 시급한 실정이다. 이를 위해 본 연구는 서 호주의 한 지하광산에서 조사한 자료를 바탕으로 인공 신경망(ANN)을 이용하여 보다 신뢰성 있는 확정선외 혼입 예측모델을 제시하였다. 또한, 연결가중 알고리즘(CWA)에 의한 요인분석을 통해 확정선외 혼입의 영향인자에 대한 기여도 분석을 실시하였다. 제안된 확정선 외 혼입 예측 ANN 모델의 학습과 시험 단계의 상관계수는 0.9641과 0.7933으로 강한 상관관계를 보였으며, CWA분석결과 발파공 길이(BHL)과 절리 방향 안전계수(SFJ)의 기여도가 18.78%와 17.99%로 다른 인자에 비해 비교적 중요한 영향인자 임을 확인할 수 있었다.

Keywords

References

  1. Austrade, 2013, Underground Mining. GPO Box 5301, Sydney NSW: Commonwealth of Australia, 32p.
  2. Barton, N., 1974, Engineering classification of rock masses for the design of tunnel support. Rock mechanics, 6.4, 189. https://doi.org/10.1007/BF01239496
  3. Clark, L. and R. Pakalnis, 1997, An empirical design approach for estimating unplanned dilution from open stope hanging walls and footwalls. Paper presented at the Presentation at 99th Canadian Institute of Mining annual conference, Vancouver, BC.
  4. Clark, L. M., 1998, Minimizing dilution in open stope mining with a focus on stope design and narrow vein longhole blasting. M.Sc. thesis, University of British Columbia, Vancouver, 357p.
  5. Garrett, R. G., 1989, The chi-square plot: a tool for multivariate outlier recognition. Journal of Geochemical Exploration, 32.1-3, 319-341. https://doi.org/10.1016/0375-6742(89)90071-X
  6. Hadjigeorgiou, J., J. Leclair and Y. Potvin, 1995, An update of the stability graph method for open stope design. CIM Rock Mechanics and Strata Control session, Halifax, Nova Scotia, 14-18.
  7. Hestenes, M. R. and E. Stiefel, 1952, Methods of conjugate gradients for solving linear systems: J. of Research of the National Bureau of Standards, 49.6, 409-436. https://doi.org/10.6028/jres.049.044
  8. Levenberg, K., 1944, A method for the solution of certain problems in least squares. Quarterly of Applied Mathematics, 2, 164-168.
  9. Lim, S.S. and H.S. Yang, 2004, An analysis of plane failure of rock slopes by quantified stereographic projection, Int. J. Rock Mech. Min. Sci., 41.3, 505. https://doi.org/10.1016/j.ijrmms.2003.12.037
  10. Mahalanobis, P. C., 1936, On the generalized distance in statistics. Proceedings of the National Institute of Sciences (Calcutta), 2, 49-55.
  11. Marquardt, D. W., 1963, An algorithm for least-squares estimation of nonlinear parameters. Journal of the Society for Industrial & Applied Mathematics, 11.2, 431-441. https://doi.org/10.1137/0111030
  12. Martin, C., D. Tannant, S. Yazici and P. Kaiser, 1999, Stress path and instability around mine openings. Proc. 9th, ISRM Congress on Rock Mechanics, 1-5.
  13. Mathews, K., E. Hoek, D. Wyllie and S. Stewart, 1981, Prediction of stable excavation spans for mining at depths below 1000 m in hard rock. CANMET DSS Serial No: 0sQ80-00081., Ottawa.
  14. Nickson, S. D., 1992, Cable support guidelines for underground hard rock mine operations. University of British Columbia M.Sc. thesis, University of British Columbia, 239p.
  15. Olden, J. D. and D. A. Jackson, 2002, Illuminating the "black box": a randomization approach for understanding variable contributions in artificial neural networks. Ecological modelling, 154.1, 135-150. https://doi.org/10.1016/S0304-3800(02)00064-9
  16. Osborne, M. R., 1992, Fisher's method of scoring. International Statistical Review/Revue Internationale de Statistique, 99-117.
  17. Pakalnis, R., R. Poulin and J. Hadjigeorgiou, 1996, Quantifying the cost of dilution in underground mines. Paper presented at the International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts.
  18. Potvin, Y. and J. Hadjigeorgiou, 2001, The stability graph method for open-stope design. Underground Mining Methods: Engineering Fundamentals and International Case Studies. Society of Mining, Metallurgy and Exploration, 8307 Shaffer Parkway, Littleton, CO 80127, USA, 2001., 513-520.
  19. Potvin, Y., 1988, Empirical open stope design in Canada.
  20. Sunwoo C, Jung Y.B., 2005, Stability Assessment of Underground Limestone Mine Openings by Stability Graph Method, Tunnel & Underground Space 15(5): 369-377.
  21. Suorineni, F., D. Tannant and P. Kaiser, 1999, Fault factor for the stability graph method of open-stope design. Trans. IMM A-Mining Industry, 108, A92-A104.