동력기계공학회지 (Journal of Power System Engineering)

  • 제18권4호
  • /
  • Pages.112-116
  • /
  • 2014
  • /
  • 2713-8429(pISSN)
  • /
  • 2713-8437(eISSN)
한국동력기계공학회 (The Korean Society for Power System Engineering)
권호 표지
DOI QR코드

DOI QR Code

Development of an Anti-Seasickness Bed used in Vessel

  • Kim, Young-Bok (Department of Mechanical System Engineering, Pukyong National University) ;
  • Jeong, Ji-Hyun (Department of Mechanical Engineering, Jeju National University)
  • 투고 : 2014.05.01
  • 심사 : 2014.06.09
  • 발행 : 2014.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Roll and pitching motions of a vessel can seriously degrade the performance of mechanical systems and the effectiveness of personnel. Many studies on roll stabilization and trimming control system design have focused on stabilizing the vessel through the use of fins, tanks, rudders and flaps. However the ultimate objective of such approaches must be to improve boarding sensitivity. This paper presents an anti-seasickness bed that consists of a rotator and bearing system that does not make use of electric power. The advantages of this system are its simple construction, usefulness, and safe operation. In this study, the rotation angles of the upper plate of a bed according to change weight of the rotator have been calculated to determine the stability. As a result, it can be concluded that proposed stabilizing bed can be of practical use in the field.

키워드

참고문헌

  1. Y. B. Kim, 2004, "A Study on an Anti-Rolling System Design of a Ship with the Flaps", KSME International Journal, Vol. 18, No. 8, pp. 1312-13185.
  2. Y. B. Kim, 2002, "A Study on Rudder-roll Stabilization System Design for Ship", Journal of the Korean Society of Mechanical Engineers, Vol. 26, No. 2, pp. 329-339. https://doi.org/10.3795/KSME-A.2002.26.2.329
  3. W. J. Hsueh, 1998, "Vibration reduction of main hull using semiactive absorbers", Journal of Marine Science and Technology, No. 3, pp. 50-60.
  4. K. Y. Lee, N. Ku and J. H Cha, 2013, "Undergraduate Courses for enhancing Design Ability in Naval Architecture", International Journal of naval architecture & ocean Engineering, No. 5, pp. 364-375. https://doi.org/10.3744/JNAOE.2013.5.3.364
  5. D. W. Jung, E. S. Jang, J. H. Jeong, K. I. Noh and J. H. Son, 2013, "Evaluation for Manufacturing Stabilization of an Architecture Insulating Material", Advanced Materials Research, vol. 716, pp. 575-580. https://doi.org/10.4028/www.scientific.net/AMR.716.575
  6. D. W. Jung, J. H. Jeong, S. M. Woo, E. S. Jang, K. J. Park and J. H. Son, 2013, "A Study on the Stability of a Vehicle with Lifting Utility", Advanced Materials Research, vol. 753-755, pp. 1169-1174. https://doi.org/10.4028/www.scientific.net/AMR.753-755.1169
  7. S. M. Woo, J. H. Son and K. S. Park, 2011, "A Study on the Control of Horizontal for the Vehicle in Orchard using tilt Sensor", Autumn Conference on KSPE, pp. 493-494.

피인용 문헌

  1. A Study on a High Efficiency Dryer for Food Waste vol.18, pp.6, 2014, https://doi.org/10.9726/kspse.2014.18.6.153
  2. A study on Forming Analysis for Copper Pipe Bending Process Improvement vol.22, pp.3, 2018, https://doi.org/10.9726/kspse.2018.22.3.060
  3. 무용접 후렉시블 조인트 개발에 관한 기초연구 vol.21, pp.1, 2014, https://doi.org/10.9726/kspse.2017.21.1.057