Korean Chemical Engineering Research

The Korean Institute of Chemical Engineers (한국화학공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Types of Acrylic Monomers on Properties of Anti-static Waterborne Acrylic Polyurethane Dispersion

아크릴 단량체 종류 변화가 대전방지용 수분산 아크릴 폴리우레탄의 물성에 미치는 영향

  • Huh, Woo Young (Department of Chemical and Biochemical Engineering, Konyang University) ;
  • Yun, Dong Gu (Department of Chemical and Biochemical Engineering, Konyang University) ;
  • Song, Ki Chang (Department of Chemical and Biochemical Engineering, Konyang University)
  • Received : 2014.04.07
  • Accepted : 2014.05.11
  • Published : 2014.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Waterborne polyurethane dispersion (WPUD) was prepared from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with different types of acrylate monomers, such as methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA) and butyl acrylate (BA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. The pencil hardness, abrasion resistance and chemical resistance of the coating films from AUD were improved than those from WPUD, while the electrical conductivity of the coating films from AUD was decreased than that of WPUD. Also, the effect of acrylate types on the properties of coating films was investigated. The AUD obtained from HEMA showed the strongest pencil hardness, while the AUD obtained from MMA exhibited the strongest abrasion resistance, chemical resistance and electrical conductivity among several types of acrylate monomers.

Isophrone diisocyanate (IPDI), polycarbonate diol (PCD)과 dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, WPUD)을 합성하였다. 이 WPUD에 아크릴 단량체인 methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA)와 butyl acrylate (BA)를 각각 첨가하여 다양한 종류의 수분산 아크릴 폴리우레탄(waterborne acrylic polyurethane dispersion, AUD)을 합성하였다. 이 AUD와 물에 분산된 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWCNT)를 혼합하여 전도성 코팅 용액을 제조한 후 polycarbonate 시트 위에 도포하여 코팅 도막을 형성하고 물성을 살펴보았다. AUD로부터 제조된 코팅 도막의 연필경도, 내마모성 및 내약품성은 WPUD 보다 향상되었으나, 전기 전도도는 감소하였다. 또한 아크릴 단량체의 종류 변화 실험에서는 코팅 도막의 연필경도는 HEMA를 사용한 경우가 가장 우수하였으나, 내마모성, 내약품성 및 전기 전도도는 MMA를 사용한 경우가 가장 우수하였다.

Keywords

References

  1. Ha, J. W. and Whang, K. H., "Formation of a Thermally Curable Coating Composition with Antistatic Function," J. Korean Ind. Eng. Chem., 12(1), 27-33(2001).
  2. Shin, Y. T., Hong, M. G., Choi, J. J., Lee, W. K., Lee, G. B., Yoo, B. W., Lee, M. G. and Song, K. C., "Preparation and Properties of Aminosilane Terminated Waterborne Polyurethane," Korean Chem. Eng. Res., 48(4), 434-439(2010).
  3. Hong, M. G., Shin, Y. T., Choi, J. J., Lee, W. K., Lee, G. B., Yoo, B. W., Lee, M. G. and Song, K. C., "Preparation of Silylated Waterborne Polyurethane/Silica Nanocomposites Using Colloidal Silica," ibid., 48(5), 561-567(2010).
  4. Shin, Y. T., Hong, M. G., Kim, B. S., Lee, W. K., Yoo, B. W., Lee, M. G. and Song, K. C., "Effect of Types of Acrylate Monomers on the Properties of Waterborne Polyurethane Dispersion," ibid., 49(5), 548-553(2011). https://doi.org/10.9713/kcer.2011.49.5.548
  5. Shin, Y. T., Hong, M. G., Choi, J. J., Lee, W. K., Lee, G. B., Yoo, B. W., Lee, M. G. and Song, K. C., "Preparation of Waterborne Polyurethane/Silica Nanocomposites Using Tetraethylorthosilicate," ibid., 48(4), 428-433(2010).
  6. Sultan M, Bhatti HN, Zuber M and Barikani M, "Synthesis and Characterization of Waterborne Polyurethane Acrylate Copolymers," Korean J. Chem. Eng., 30(2), 488-493(2013). https://doi.org/10.1007/s11814-012-0148-3
  7. Hong, M. G., Kim, B. S. and Song, K. C., "Preparation and Properties of Aniline Terminated Waterborne Polyurethane/Multi-walled Carbon Nanotube Composite Coating Solutions," Korean Chem. Eng. Res., 50(3), 403-409(2012). https://doi.org/10.9713/kcer.2012.50.3.403
  8. ASTM D 3359, "Standard Test Methods for Measuring Adhesion by Tape Test," ASTM International, 927-929(1997).
  9. Kim, B. S., Hong, M. G., Yoo, B. W., Lee, M. G., Lee, W. I. and Song, K. C., "Preparation of Waterborne Polyurethane-Acrylic Hybrid Solutions from Different Types of Acrylate Monomers," Korean Chem. Eng. Res., 50(3), 410-416(2012). https://doi.org/10.9713/kcer.2012.50.3.410
  10. Huh, W. Y., Yun, D. G. and Song, K. C., "Preparation of Conductive Coating Solutions by Blending Waterborne Acrylic Polyurethane Dispersion with Carbon Nanotube," ibid., 51(1), 73-79(2013). https://doi.org/10.9713/kcer.2013.51.1.73
  11. Hwang, J. H. and Song, K. C., "Preperation of UV-Curable Organic-Inorganic Hybrid Hard Coatings Using Alumina Sols and Acrylate Monomers," ibid., 49(3), 277-284(2011). https://doi.org/10.9713/kcer.2011.49.3.277