DOI QR코드

DOI QR Code

A Study on Multi-band Antenna for Mobile using Coupling Feeding

커플링 급전을 이용한 모바일용 다중대역 안테나에 관한 연구

  • Received : 2014.11.05
  • Accepted : 2014.12.03
  • Published : 2014.12.30

Abstract

In this paper, an antenna which has quad band in LTE (0.746 ~ 0.798 GHz), GSM(0.824 ~ 0.960 GHz), DCS(1.71 ~ 1.88 GHz), WCDMA(1.91 ~ 2.17 GHz) is proposed. An antenna size is $122mm{\times}50mm{\times}0.8mm$ on FR4(${\epsilon}_r=4.4$) ground substrate. In the proposed antenna, branch line is applied to the conventional PIFA architecture to achieve multi-bandwidth. Coupling power supply is applied for a wide bandwidth. Result of the measurement is as follows. When the low frequency, the antenna presents gain of 0.93 ~ 1.92dBi, and radiation efficiency of 49.60 ~ 76.35 %, and When the high frequency, gain is 2.19 ~ 4.66dBi, and radiation efficiency is 60.40 ~ 80.01 %, and with a VSWR < 2 (${\leq}-10dB$)measurement results for standard satisfies all band. Judging from the result, proposed multiband antenna is expected to be applied. B4G mobile terminals since the antenna shows an outstanding performance.

본 논문은 LTE (0.746 ~ 0.798 GHz), GSM(0.824 ~ 0.960 GHz), DCS(1.71 ~ 1.88 GHz), WCDMA(1.91 ~ 2.17 GHz) 대역에서 사용 가능한 다중 대역 모바일 안테나에 대하여 제안하였다. 제안된 안테나는 기본적인 PIFA 구조에 두 개의 브랜치 라인을 추가하여 다중대역을 형성하고, 커플링 급전 방식을 사용하여 대역폭을 향상시킨 안테나이다. 안테나의 크기는 $122mm{\times}50mm{\times}0.8mm$이며, FR4(${\epsilon}_r=4.4$)를 사용하였으며, 측정결과 VSWR < 2(${\leq}-10dB$)을 기준으로 모든 주파수 대역을 만족하였다. 제안된 다중대역 안테나는 낮은 주파수대역에서 0.93 ~ 1.92 dBi의 이득과 49.60 ~ 76.35 %의 방사효율 특성을 보이고, 높은 주파수대역에서는 2.19 ~ 4.66 dBi의 이득과 60.40 ~ 80.01 %의 방사효율 특성을 보였다. 따라서 본 논문에서 제안한 다중대역 안테나는 현재 상용화 되어있는 이동통신 단말기용 안테나에 비해 전 대역에서 우수한 특성을 확인하였다. 이와 같은 우수한 특성으로 인하여 본 연구에서 제안된 안테나는 4세대 모바일 단말기뿐만 아니라 향후 개발하고 있는 B4G용 안테나로 적용 가능 할 것으로 판단된다.

Keywords

References

  1. C. Delaveaud, P. Leveque, and B. Jecko, "Small sized low-profile antenna to replace monopole antennas," Electronics Lett., vol. 34, no. 8, July 1998.
  2. Michail Tzortzakakis, Member, and Richard J. Langley, "Quad-Band Internal Mobile Phone Antenna," IEEE Transactions on Antennas and Propagation, vol. 55, NO. 7, July 2007.
  3. A. Ghosh, W. Xiao, R. Ratasuk, A. Rottinghaus, and B. Classon, "Multi-antenna system design for 3GPP LTE," IEEE ISWCS, October 2008.
  4. Sun-gook Hwang, Cheol Yoon, Chan-sub Park, Hyo-dal Park, "A Reconfigurable Antenna for Mobile Handset Using RF Switch" The Journal of The Korea Institute of Intelligent Transport Systems, vol. 13, NO. 5, October 2014.
  5. R. A. Bhatti, Y. T. Im, and S. O. Park, "Compact PIFA for mobile terminals supporting multiple cellular and non-cellular standards," IEEE Trans. Antennas Propagation, vol 57(9), pp. 2534-2540, July 2009. https://doi.org/10.1109/TAP.2009.2027086
  6. H. Rhyu, C. Jung, J. Byun, M. Park, Y. Chung, T. Kim, and B. Lee, "DVB-H antenna design using folder-type chassis and coupling element on a ferrite," IEEE Antennas and Wireless Propagation Letters, vol. 8, pp. 453-456, June 2009. https://doi.org/10.1109/LAWP.2009.2020311
  7. Kin-Lu Wong, Fellow, Wei-Yu Chen, and Ting-Wei Kang, "On-Board Printed Coupled-Fed Loop Antenna in Close Proximity to the Surrounding Ground Plane for Penta-Band WWAN Mobile Phone," IEEE Transactions on Antennas and Propagation, vol. 59, NO. 3, March 2011.
  8. Risto Valkonen, Mikko Kaltiokallio, "Capacitive Coupling Element Antennas for Multi-Standard Mobile Handsets," IEEE Transactions on Antennas and Propagation, vol. 61, NO. 5, March 2013.

Cited by

  1. 무인 이동체용 GNSS 서비스를 위한 원형 편파 안테나 설계 vol.10, pp.1, 2014, https://doi.org/10.17661/jkiiect.2017.10.1.111
  2. 메탈 프레임 커플링을 이용한 웨어러블 디바이스용 다중대역 안테나 설계 vol.10, pp.6, 2017, https://doi.org/10.17661/jkiiect.2017.10.6.522