한국전산유체공학회지 (Journal of computational fluids engineering)

한국전산유체공학회 (Korean Society of Computational Fluids Engineering)
권호 표지
DOI QR코드

DOI QR Code

전산해석기법에 의한 단단 축류팬 동익의 공력설계 및 성능 예측

AERODYNAMIC DESIGN AND PERFORMANCE PREDICTION OF ROTOR BLADES IN A SINGLE-STAGE AXIAL FAN USING CFD METHODS

  • Kim, E.S. (Graduate School, Seoul National University) ;
  • Chung, H.T. (School of Mechanical Engineering, Gyeongsang National University)
  • 투고 : 2014.06.05
  • 심사 : 2014.06.21
  • 발행 : 2014.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the present study, CFD methods are applied in the design procedure of rotor blades in a axial-flow fan and the aerodynamic performances are predicted. The blade profiles initially determined by the free vortex method and empirical formula are modified to match the target value of the rotor work load through the analysis of 3D Navier-Stokes solver. The corrected shapes of the rotor blade showed the increase of the efficiency and the pressure simultaneously.

키워드

참고문헌

  1. 2011, Kim, J.W., Kim, J.H., Lee, C. and Kim, K.Y., "High-Efficiency Design of a Ventilation Axial-Flow Fan by Using Weighted Average Surrogate Models,"(in Korean) Trans. Korean Soc. Mech. Eng. B, Vol.35, No. 8, pp.763-771. https://doi.org/10.3795/KSME-B.2011.35.8.763
  2. 2009, Cho, C.H., Cho, S.Y., Ahn, K.Y. and Kim, Y.K., "Study of an Axial-Type Fan Design Technique Using an Optimization Method," J. Process Mechanical Engineering, Vol. 223, pp.101-111. https://doi.org/10.1243/09544089JPME254
  3. 2010, Lee, C. and Kil, H.G., "A Computerized Design System of the Axial Fan Considering Performance and Noise Characteristics," (in Korean) J. Fluid Machinery, Vol.13, No. 2, pp.48-53. https://doi.org/10.5293/KFMA.2010.13.2.048
  4. 2006, Jang, C.M., Samad, A. and Kim, K.Y., "Optimal Design for Stacking Line of Rotor Blade in a Single-Stage Transonic Axial Compressor," (in Korean) J. Fluid Machinery, Vol.9, No. 3, pp.7-13. https://doi.org/10.5293/KFMA.2006.9.3.007
  5. 1993, Kim, B.N. and Chung, M.K., "Off-Design Performance Prediction of an Axial Flow Compressor Stage Using Simple Loss Correlation," (in Korean) Trans. Korean Soc. Mech. Eng. B, Vol.18, No. 12, pp.3357-3368.
  6. 2000, Chung, H.T., Park, J.Y. and Baek, J.H., "Numerical Anaysis of Rotor-Stator Interaction Flow Fields in Axial Flow Compressor Using Two Dimensional Navier-Stokes Equations," (in Korean), Proc. 1st NCFES, Muju, Korea, pp.1-4.
  7. 2008, Ha, J.H., Park, S.U., Seo, L.S. and Mo, Y.W., "Fluid Machinery," (in Korean) Bomoondang, pp.325-328.
  8. 1960, Lieblein, S., "Incidence and Deviation-Angle Correlations for Compressor Cascades," J. Basic Eng. (trans. ASME), Vol.82, pp.101-112. https://doi.org/10.1115/1.3663010
  9. 1961, Kovach, K. and Sandercock, D., "Aerodynamic Design and Performance of Five Stage Transonic Axial Flow Compressor," J. Eng. Power (trans. ASME), Vol. 83, pp.303-321.
  10. 2009, ANSYS CFX-Solver Modeling Guide. Ver.12.1, ANSYS Inc.
  11. 2010, Park, T.G., Jung,I.S., Chung, H.T., Park, J.Y., Kim, S.M. and Baek, J.H., "Numerical investigation of The Effect of the Stagger Angle on the Aerodynamic Performances in the Vaned Diffuser of a Centrifugal Compressor," (in Korean) J. Comput. Fluids Eng., Vol.15, No.3, pp.60-65.