DOI QR코드

DOI QR Code

PC기반의 철도 온도환경에 적합한 모니터링 장치 구현

The implementation of the PC-based monitoring device for railway temperature environmental

  • 투고 : 2014.06.21
  • 심사 : 2014.07.18
  • 발행 : 2014.07.31

초록

우리나라의 일교차는 커지고 있으며, 기후로 인한 철도 피해와 경제적 손실에 대한 보고로 환경이 열악해지는 것을 알 수 있다. 이러한 상황에서도 철도용 모니터링 장치는 운영과 관리를 지원하기 위해 상시 동작해야 하는 장치다. 따라서 본 연구에서는 COM 기반의 모니터링 장치를 산업용-확장 전자부품을 사용하여 구현 및 제작하였으며, 실제 철도 온도환경에 적합 여부를 시험하였다. 시험을 통해 모니터링 장치의 내한성, 내열성에 대한 검증을 할 수 있었다. 제품에 사용된 부품은 철도산업의 전자제품 개발에 활용할 수 있을 것이다.

The diurnal range of temperature in korea is increasing. We know that the environment has deteriorated through report about railway damage and economic loss caused by climate. In these conditions, Monitoring device for railway must operate to support the operations and maintenance. Therefore, In this paper, COM-based monitoring device implemented using Industrial-Extended electronic components and made, We tested compliance about temperature environment of actual railway. We verified through testing about cold and dry heat of monitoring device. Used components in this product will be able to utilize the development of the railway industry of electronics.

키워드

참고문헌

  1. Y. Kin and Y. Sasaki, "What is Environmental Testing," ESPEC TECHNOLOGY Mag., no. 1, Apr. 1996, pp. 1-15.
  2. L. Xu, B. Yang, S. Wang, H. Li, and L. Huang, "Research on thermal characteristics and onchip temperature-controlling for silicon micro-gyroscope," IEEE Int. Conf. Information and Automation, Shenzhen, China, June 2011, pp. 807-812.
  3. H.-K. Jang, 2010 Special Report on abnormal weather. Seoul: Korea Meteorological Administration, 2010.
  4. S. Yang, J. Kwon, and W. Kim, "The Design of Operating System on Wind Power Plant," J. of the Korea Institute of Electronic Communication Sciences, vol. 6, no. 1, Jan. 2011, pp. 135-141.
  5. M.-A. Sandidzadeh. "Intelligent condition monitoring of railway signaling in train detection subsystems," J. of Intelligent & Fuzzy System, vol. 24, 2013, pp. 859-869.
  6. J.-H. Kim and D. Yang, "A Study of Testing Procedure Temperature of Electronic Equipment for Railway Environments (Cold and Heat)," J. of the Korea Society for Railway, vol. 2011, no. 10, Oct. 2011, pp. 748-753.
  7. L. Jagan, C. Hora, B. Kruseman, S. Eichenberger, A. K Majhi, and V. Kamakoti, "Impact of Temperature on Test Quality," IEEE Int. Conf. VLSI Design, Bangalore, India, June 2010, pp. 276-281.
  8. G. Kim, "Implementation of Real-time Sensor Monitoring System on Zigbee Module," J. of the Korea Institute of Electronic Communication Sciences, vol. 6, no. 2, Feb. 2011, pp. 312-318.
  9. S.-B. Ye, S.-Y. Yang, and H. Ceong, "The Development on Component-based Environment Information Monitoring System," J. of the Korea Institute of Electronic Communication Sciences, vol. 7, no. 1, Jan. 2012, pp. 195-201.