Journal of the Architectural Institute of Korea Structure & Construction (대한건축학회논문집:구조계)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Construction Management by Design and Construction Phase for Economic Improvement of the Curtain Wall Construction

커튼월 공사의 경제성 제고를 위한 설계.시공단계별 사업관리 방안에 관한 연구

  • 문상덕 (서울과학기술대학교 일반대학원) ;
  • 옥종호 (서울과학기술대학교 건축학부)
  • Received : 2013.10.09
  • Accepted : 2014.01.16
  • Published : 2014.02.28
⟨ Previous Next ⟩

Abstract

The curtain wall construction applied on high-rise building facades in Korea became generalized, but specialty of the CMr(Construction Manager) who needs to perform economical project management with specialty in the curtain wall construction is still lacking. Therefore, this study performed about the business management plan of the design and construction phase for profitability provision of the curtain wall construction. This study analyzed the structure design standard of the curtain wall, researched economical design alternatives, and analyzed the Mock-up test of 16 curtain wall projects that were recently conducted. Based on the research results, this study suggested items to be confirmed at the time of inspecting the structural design by curtain wall system, improvement method of the section properties for economical efficiency of sections, and ways to improve the distance between anchor point and sleeve or stack joint. Also, this study classified causative factors of the difference in the curtain wall mock-up test deflection value and the design deflection value into, 1)problem in the member connections, 2)problem in manufacturing the structure, 3)problem in the structure analysis and 4)problem of assumptions at the time of designing the structure, and suggested a project management strategy for CMr to secure economic feasibility and quality of the curtain wall.

Keywords

Acknowledgement

Supported by : 서울과학기술대학교

References

  1. 강민재, 옥종호, 초고층 건축물 커튼월의 경제적인 설계를 위한 실물시료시험 결과와 구조설계 결과의 비교에 관한 연구, 한국건설관리학회 전국대학생 학술발표대회 논문집, 2011.11
  2. 강희철, 풍하중을 받는 알루미늄 커튼월의 구조성능에 관한 연구, 석사학위논문, 충남대학교 산업대학원 건축공학전공, 2002
  3. 건설기술네트워크, 건축시공이야기 III, p.p.162-163, 2003
  4. 원종호, 외장재 설계 풍하중의 산정 및 Curtain Wall Frame 의 구조성능 평가, 기술기사, 한국풍공학회, 2005
  5. 조예원, 이민철, 옥종호, 초고층건축 알루미늄커튼월 구조설계검토 프로세스와 매뉴얼 개발에 관한 연구: 멀리언과 트랜섬을 중심으로, 한국건설관리학회논문집, 10(3), 2009
  6. 초고층커튼월전문가과정 (Skyscrapers Curtain-wall Experts Academy) 세미나, 서울과학기술대학교, 2012
  7. AAMA, AAMA TIR-A11-04 Maximum Allowable Deflection of Framing System for Building Cladding Components at Design Wind Loads, 2004
  8. Aluminum Association, Aluminum Design Manual, 2005
  9. ASTM, ASTM E 1300-94, Standard Practice for Determining the Minimum Thickness and Type of Galss Required to Resist a Specifed Load, 1994
  10. J. Randolph Kissell, Robert L. Ferry, Aluminum Structures; A Guide to Their Specifications and Design, 2nd edition, JHOIN WILEY & SONS INC, 2002
  11. M. K. Schmidt and R. A. Cechner, Frorensic Studies of Surface-Damaged Curtain Wall Glass, Advances in Hurricane Engineering, p.p.393-404, 2013
  12. M. Nawar, H. Salim, B.Lusk, K. Perry, S. Kiger, and G. Miller, Modeling and Testing of Laminated Curtain wall System under Blast Loading, Structures Congress, p.p.170-180, 2013

Cited by

  1. The Accelerated Window Work Method Using Vertical Formwork for Tall Residential Building Construction vol.10, pp.2, 2018, https://doi.org/10.3390/su10020456