Abstract
Purpose : At the time of the pelvis cancer radiation treatment using the belly board, set-up error is large because of a prone position. In order to improve the reproducibility, we made Vac-lock type belly board. In this study, we attempt to validate its utility. Materials and Methods : We compared belly board and Vac-lock type belly board through the OBI. OBI was performed three times with entire course of treatment and the setup errors in the direction of X axis, Y axis, Z axis were recorded and calculated the distance from the isocenter. Results : X axis, Y axis, Z axis setup errors with existing belly board were 0.32 cm, 0.41 cm, 0.29 cm. The setup errors with the vac-lock type belly board were 0.12 cm, 0.19 cm, 0.17 cm. Further, errors of 0~0.29 cm were increased from 48% to 83% when using VLT belly board. Error of 0.5 cm or more was reduced from 21% to 2%. Conclusion : Vac-lock type belly board is able to maintain the efficacy of existing and create to match the characteristics of the patient. Therefore We think that vac-lock type belly board is very useful in pelvic cancer patients.
목 적 : Belly board를 사용한 골반부 치료 시 엎드린 자세로 인해 set-up의 재현성이 다른 치료부위에 비해 떨어진다. 이에 본 연구에서는 기존의 belly board만 사용 시 발생했던 단점들을 보완하기 위해 VLT belly board(Vac-lock type belly board)를 자체 제작하여 그 유용성을 검증하고 set-up의 재현성을 높이고자 한다. 대상 및 방법 : 기존의 belly board를 사용하여 치료한 환자의 OBI 영상과 자체 제작한 VLT belly board를 사용하여 치료한 환자의 OBI 영상을 비교하였다. OBI는 전체 치료과정 중 3번을 시행하였는데, AP 방향, LAT 방향에서 각각 실시하였다. 2차원정합을 이용하여 X축 좌 우방향, Y축 상 하방향, Z축 전 후방향에서 발생하는 set-up에 대한 오차를 측정하여 비교 분석하였다. 결 과 : 영상 2차원 정합을 이용한 set-up의 평균 오차는 X축 방향으로는 0.32 cm에서 0.12 cm으로, Y축 방향으로는 0.41 cm에서 0.19 cm으로, Z축 방향으로는 0.29 cm에서 0.17 cm으로 VLT belly board 사용한 결과의 평균 오차가 감소하였다. 또한 VLT belly board 사용 시 0~0.29 cm의 오차가 48%에서 83%로 증가되고 0.5 cm 이상의 오차가 21%에서 2%로 감소를 보였다. 결 론 : VLT belly board 사용은 기존의 belly board 사용에 대한 효과를 유지하면서 환자 개인의 특성에 맞는 Vac-lock 제작을 통하여 set-up의 오차를 줄여줄 수 있음을 확인했다. 따라서 엎드린 자세로 골반부 치료 시 VLT belly board는 매우 유용할 것이라고 사료된다.