References
- ACI Subcommittee 445 (2002). Examples for the design of structural concrete with strut-and-tie models; SP-208, American Concrete Institute, Farmington Hills, Michigan, USA.
- American Concrete Institute (2011). Building code requirements for structural concrete (ACI 318M-11) and commentary, Farmington Hills, Michigan, USA.
- American Association of State Highway and Transportation Officials (2010). AASHTO LRFD bridge design specifications, 5 th Edition, Washington, D.C., USA.
- Alshegeir, A. (1992). Analysis and design of disturbed regions with strut-tie models, Ph.D Dissertation, School of Civil Engineering, Purdue University, Indiana, USA.
- Bergmeister, K., Breen, J. E., Jirsa, J. O. and Kreger, M. E. (1993). Detailing in structural concrete, Research Report 1127-3F, University of Texas at Austin, Texas, USA.
- Canadian Standards Association (2004). Design of concrete structures for buildings, A23.3-M04, Rexdale, Ontario, Canada.
- Chae, H. S. (2012). Indeterminate strut-tie models for reinforced concrete deep beams and corbels, Ph.D Dissertation, Kyungpook National University, Daegu, Korea, p. 290 (in Korean).
- Collins, M. P. and Mitchell, D. (2001). Prestressed concrete structures, 3 rd Edition, Prentice Hall, Englewood Cliffs, New Jersey, p. 766.
- Comite Euro-International du Beton (2010). CEP-FIP model code 2010, International Federation for Structural Concrete (fib), Lausanne, Switzerland.
- European Committee for Standardization (2004). Eurocode 2: Design of concrete structures, Brussels, Belgium.
- Foster, S. J., Powell, R. E. and Selim, H. S. (1996). "Performance of high-strength concrete corbels."ACI Structural Journal, Vol. 93, No. 5, pp. 555-563.
- Hwang, S. J., Lu, W. Y. and Lee, H. J. (2000). "Shear strength prediction for reinforced concrete corbels."ACI Structural Journal, Vol. 97, No. 4, pp. 543-552.
- Korean Concrete Institute (2012). Design specifications for structural concretes, Kimoondang, Seoul, South Korea, p. 342 (in Korean).
- Korean Concrete Institute (2013). Examples of strut-tie model design of structural concretes, Kimoondang, Seoul, South Korea, p. 259 (in Korean).
- Kriz, L. B. and Raths, C. H. (1965). "Connections in precast concrete structures - Strength of corbels."PCI Journal, Vol. 10, No. 1, pp. 16-61. https://doi.org/10.15554/pcij.02011965.16.61
- MacGregor, J. G. (1997). Reinforced concrete - Mechanics and Design, 3 rd Edition, Prentice Hall, Englewood Cliffs, New Jersey, USA.
- Marti, P. (1985). "Basic tools of reinforced concrete beam design." Journal of American Concrete Institute, Vol. 82, No. 1, pp. 46-56.
- Mattock, A. H., Chen, K. C. and Soongswang, K. (1976). "The behavior of reinforced concrete corbels."PCI Journal, Vol. 21, No. 2, pp. 52-77. https://doi.org/10.15554/pcij.03011976.52.77
- Nielsen, M. P., Braestrup, M. W., Jensen, B. C. and Bach, F. (1978). Concrete plasticity, beam shear - shear in joints - punching shear, Special Publication, Danish Society for Structural Science and Engineering, Lyngby, Denmark.
- Ramirez, J. A. and Breen, J. E. (1983). Proposed design procedure for shear and torsion in reinforced and prestressed concrete, Research Report 248-4F, Center for Transportation Research, University of Texas at Austin, Texas, USA.
- Schlaich, J., Schaefer, K. and Jennewein, M. (1987). "Towards a consistent design of structural concrete."Journal of the Prestressed Concrete Institute, Vol. 32, No. 3, pp. 74-151.
- Thurlimann, B. (1976). "Shear strength of reinforced and prestressed concrete - CEB Approach."Special Publication 59-6, American Concrete Institute, Detroit, USA.
- Vecchio, F. J. and Collins, M. P. (1982). The response of reinforced concrete to in-plane shear and normal stresses, Publication No. 82-03, Department of Civil Engineering, University of Toronto, Canada.
- Yang, K. H., Lee, Y. H., Eun, H. C. and Chung, H. S. (2003). "An evaluation of effective strength factor of strut in strut-tie modeling of reinforced concrete deep beams without shear reinforcement." Journal of Architectural Institute of Korea, Vol. 19, No. 1, pp. 21-28 (in Korean).
- Yun, Y. M. (2005). "Effective strength of concrete strut in strut-tie model (I): Methods for Determining Effective Strength of Concrete Strut."Journal of the Korean Society of Civil Engineers, Vol. 25, No. 1A, pp. 49-59 (in Korean).
- Yun, Y. M. and Ramirez, J. A. (1994). "Strut-tie model design of disturbed regions in concrete structure."ASCE Structural Congress XII, Atlanta, Georgia, USA.