DOI QR코드

DOI QR Code

A method for the non-linear and failure load analysis of reinforced concrete frames

  • Cosgun, Turgay (Istanbul University, Engineering Faculty, Department of Civil Engineering) ;
  • Sayin, Baris (Istanbul University, Department of Construction and Technical Affairs)
  • 투고 : 2012.08.24
  • 심사 : 2014.05.09
  • 발행 : 2014.07.25

초록

Modern trend in structural design is to use smaller elements in order to ensure several purposes such as economy, functionality and aesthetic in appearance. However, because of decreasing rigidity of the structural elements, the system displacements increases and displacements become an important subject in this kind of structures takes into account both geometrical changes and the carrying capacity of the material after linear-elastic boundary. In this study, a method is proposed to calculate the failure loads and to analyse the reinforced concrete space frame systems. The numerical examples gathered from the literature survey are solved with this method utilising the prepared computer program and the comparable results are presented. The results show that the method is sufficiently accurate.

키워드

참고문헌

  1. Argyris, J.H., Boni, B., Hindenlang, U. and Kleiber, M. (1982), "Finite element analysis of two- and threedimensional elasto-plastic frames-the natural approach", Comput. Method. Appl. M., 35(2), 221-248. https://doi.org/10.1016/0045-7825(82)90135-9
  2. Akhaveissy, A.H. and Desai, C.S. (2012), "Application of the DSC model for nonlinear analysis of reinforced concrete frames", Finite Elem. Anal. Des., 50(March 2012), 98-107. https://doi.org/10.1016/j.finel.2011.09.001
  3. Arnesen, A., Sorensen, S.I. and Bergan, P.G. (1980), "Nonlinear analysis of reinforced concrete", Comput. Struct., 12(4), 571-579. https://doi.org/10.1016/0045-7949(80)90132-7
  4. Arslan, G. (2007), "Sensitivity study of the drucker-prager modeling parameters in the prediction of the nonlinear response of reinforced concrete structures", Mater. Des., 28(10), 2596-2603. https://doi.org/10.1016/j.matdes.2006.10.021
  5. Barros, R.C. and Almeida, R. (2005), "Pushover analysis of asymmetric three-dimensional building frames", J. Civ. Eng. Manag., 11(1), 3-12.
  6. Birely, A.C., Lowes, L.N. and Lehman, D.E. (2012), "A model for the practical nonlinear analysis of reinforced- concrete frames including joint flexibility", Eng. Struct., 34(January 2012), 455-465. https://doi.org/10.1016/j.engstruct.2011.09.003
  7. Celik, T. (1977), "Elastic-plastic analysis of complete structures with shear walls and frames", Ph. D Thesis, Department of Civil Engineering University of Aston in Birmingham.
  8. Celik, T. (1980), "Nonlinear analysis of RC frames and calculations of failure loads", Tubitak 7th Science Congress, Engineering Research Group Bulletin, Pages 1069-1081, Aydin.
  9. Celik, T. (1982), "The theorems of structural variation for space frames, plates and shear walls", Ph. D Thesis, I.T.U, Istanbul (in Turkish).
  10. Cosgun, T. (2001), "Nonlinear analysis of complete structure systems with plates, shear walls, frame and core", Ph. D Thesis, I.U. Institute of Science and Technology, Istanbul (in Turkish).
  11. Cosgun, T. (2003), "A computer program for nonlinear analysis of structure systems", Pamukkale University, Faculty of Engineering, J. Eng. Sci., 9(2), 215-222.
  12. Cosgun, T. (2003a), "An iterative method for analysis of space frame systems with second-order theory", Pamukkale University, Faculty of Engineering, J. Eng. Sci., 9(3), 419-426.
  13. Deeble, R.H. (1973), "Nonlinear analysis of reinforced concrete frames", Ph. D Thesis, Departmant of Civil Engineering, University of Aston in Birmingham.
  14. Dinno, K.S. and Mekha, B.B. (1995), "A developed algorithm for the inelastic analysis of reinforced concrete frames", Comput. Struct., 57(2), 227-232. https://doi.org/10.1016/0045-7949(94)00621-9
  15. Dinno, K.S. and Mekha, B.B. (1993), "Optimal design of reinforced concrete frames based on inelastic analysis", Comput. Struct., 47(2), 245-252. https://doi.org/10.1016/0045-7949(93)90373-L
  16. Girgin, K. (1996), "A method of load increments for the determination of second-order limit load and collapse safety of reinforced concrete framed structures", Ph. D Thesis, Institute of Science and Technology, ITU, Istanbul.
  17. Habibi, A.R. and Moharrami, H. (2010), "Nonlinear sensitivity analysis of reinforced concrete frames", Finite Elem. Anal. Des., 46(7), 571-584. https://doi.org/10.1016/j.finel.2010.02.005
  18. Hognestad, E., Hanson, N.W. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", J. Amer. Conc. Inst., 27(4).
  19. Izzuddin, B.A. and Smith, D.L. (2000), "Efficient nonlinear analysis of elasto-plastic 3D R/C frames using adaptive techniques", Comput. Struct., 78(4), 549-573. https://doi.org/10.1016/S0045-7949(00)00041-9
  20. Kratzig, W.B. and Polling, R. (2004), "An elasto-plastic damage model for reinforced concrete with minimum number of material parameters", Comput. Struct., 82(15-16), 1201-1215. https://doi.org/10.1016/j.compstruc.2004.03.002
  21. Lepage, A., Hopper, M.W., Delgado, S.A. and Dragovich, J.J. (2010), "Best-fit models for nonlinear seismic response of reinforced concrete frames", Eng. Struct., 32(9), 2931-2939. https://doi.org/10.1016/j.engstruct.2010.05.012
  22. Mo, H.K. and Yuh, J.J. (1989), "Nonlinear dynamic analysis of elastic frames", Comput. Struct., 33(4), 1057-1063. https://doi.org/10.1016/0045-7949(89)90441-0
  23. Monnier, T. (1970), "The moment curvature relation of reinforced concrete", Heron, 17(2), 1-101.
  24. Mwafy, A.M. and Elnashai, A.S. (2001), "Static pushover versus dynamic collapse analysis of RC buildings", Eng. Struct., 23(5), 407-424. https://doi.org/10.1016/S0141-0296(00)00068-7
  25. Otani, S. (1980), "Nonlinear dynamic analysis of reinforced concrete building structures", Can. J. Civil Eng., 7, 333-344. https://doi.org/10.1139/l80-041
  26. Pagnoni, T., Slater, J., Ameur-Moussa, R. and Buyukozturk, O. (1992), "A nonlinear three-dimensional analysis of reinforced concrete based on a bounding surface model", Comput. Struct., 43(1), 1-12. https://doi.org/10.1016/0045-7949(92)90074-A
  27. Quaranta, G., Kunnath, S.K. and Sukumar, N. (2012), "Maximum-entropy meshfree method for nonlinear static analysis of planar reinforced concrete structures", Eng. Struct., 42(September 2012), 179-189. https://doi.org/10.1016/j.engstruct.2012.04.020
  28. Saka, M.P. and Ulker, M. (1991), "Optimum design of geometrically nonlinear space trusses", Comput. Struct., 41(6), 1387-1396. https://doi.org/10.1016/0045-7949(91)90276-R
  29. Stramandinoli, R.S.B. and La Rovere, H.L. (2012), "FE model for nonlinear analysis of reinforced concrete beams considering shear deformation", Eng. Struct., 35(February 2012), 244-253. https://doi.org/10.1016/j.engstruct.2011.11.019
  30. Thanoon, W.A., Paul, D.K., Jaafar, M.S. and Trikha, D.N. (2004), "Infuence of torsion on the inelastic response of three-dimensional RC frames", Finite Elem. Anal. Des., 40(5-6), 611-628. https://doi.org/10.1016/S0168-874X(03)00099-4
  31. Uzgider, E.A. (1980), "Inelastic response of space frames to dynamic loads", Comput. Struct., 11(1-2), 97-112. https://doi.org/10.1016/0045-7949(80)90150-9
  32. Wen, R.K. and Farhoomand, F. (1970), "Dynamic analysis of inelastic space frames", J. Eng. Mech.-ASCE, 96(5), 667-686.

피인용 문헌

  1. Analysis of stress dispersion in bamboo reinforced wall panels under earthquake loading using finite element analysis vol.21, pp.4, 2014, https://doi.org/10.12989/cac.2018.21.4.451
  2. A numerical-experimental evaluation of beams composed of a steel frame with welded and conventional stirrups vol.22, pp.1, 2014, https://doi.org/10.12989/cac.2018.22.1.027