Journal of dental hygiene science (치위생과학회지)

The Korean Society of Dental Hygiene Science (한국치위생과학회)
권호 표지

Influence of Low Temperature Degradation on Bond Strength of Yttria-Stabilized Tetragonal Zirconia Polycrystal Core to Veneering Ceramic

저온열화현상이 지르코니아 코어와 전장도재의 전단결합강도에 미치는 영향

  • Kim, Ki-Baek (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University) ;
  • Kim, Jae-Hong (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University)
  • 김기백 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김재홍 (고려대학교 일반대학원 보건과학과 치의기공전공)
  • Received : 2014.01.14
  • Accepted : 2014.02.19
  • Published : 2014.03.31
⟨ Previous Next ⟩

Abstract

The purpose of this study was to evaluate the influence of low temperature degradation (LTD) on the bonding strength of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP). The push-shear bond test method was used to investigate the core-veneer bonding strength of industrially manufactured Y-TZP core ceramic and manufacturer recommended veneering ceramic. Four groups from ceramic-zirconia specimens (n=28; n=7 per group) were assigned into four experimental aging conditions, namely storage in an autoclave at $134^{\circ}C$ for 0, 3, 5, 10 hours. Bonding strength was obtained using a universal testing machine with crosshead speed 0.5 mm/min. Data were statistically analyzed using one-way ANOVA and Tukey's test (${\alpha}=0.05$). In bonding strength test, the group which was treated with LTD showed lower bonding strength than no treated group. The ceramic-zirconia bonding strength was affected by LTD (p<0.05). Digital microscope examination of the fracture surface showed mixed failures with adhesive and cohesive types in LTD with treated Y-TZP groups.

본 연구는 최근 심미보철물 제작에 널리 사용되는 지르코니아의 저온열화가 수복물의 안정성 및 내구성에 영향을 미치는 여부를 확인하기 위하여 전단결합강도를 측정하였다. 디스크 형태의 시편을 각각 7개씩 제작한 후 전장도재를 축성하여, ISO 13356 규격에 의거한 조건으로 고압증기 멸균기에 저온열화의 정도를 조절하기 위하여 3, 5, 10시간 동안 수열처리를 진행하였다. 제한된 조건하에 시행된 실험을 통해 전단결합강도를 확인하였으며, 측정 후 파절양상을 관찰 하였다. 저온열화 처리 전후의 시편에 대한 전단결합강도의 변화는 각 실험군별 유의한 차이가 있었다(p<0.05). 10시간을 저온열화 처리한 시편이 가장 낮은 전단결합강도로 나타났으며, 처리시간이 길어질수록 전단결합강도가 낮아지는 경향을 보였다. 파절 양상으로 저온열화 처리를 하지 않은 시편에서 응집성 파절을 보였으며, 저온열화 처리가 길어질수록 혼합형 파절 경향으로 전환되었다. 결론적으로 본 연구는 저온열화 현상이 진행될수록 지르코니아 코어와 전장도재 간의 결합강도가 낮아지는 경향을 확인하였다. 본 실험결과를 토대로 치과용 지르코니아를 이용한 보철물 제작과정과 환자에게 장착 후 안정적인 사용을 위하여 저온열화 현상에 대한 주의가 필요할 것으로 생각된다.

Keywords

References

  1. Denry I, Kelly JR: State of the art of zirconia for dental application. Dent Mater 24: 299-307, 2008. https://doi.org/10.1016/j.dental.2007.05.007
  2. Kim KB, Kim WC, Kim HY, Kim JH: An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system. Dent Mater 29: e91-e96, 2013.
  3. Tara MA, Eschbach S, Bohlsen F, Kern M: Clinical outcome of metal-ceramic crowns fabricated with laser-sintering technology. Int J Prosthodont 24: 46-48, 2011.
  4. Piconi C, Maoccauro G: Review zirconia as a ceramic biomaterial. Biomaterials 20: 1-25, 1999. https://doi.org/10.1016/S0142-9612(98)00010-6
  5. Hannink RH, Kelly PM, Muddle BC: Transformation toughening in zirconia containing ceramics. J Am Ceram Soc 83: 461-487, 2000.
  6. Chevailer J, Cales B, Drouin JM: Low-temperature aging of Y-TZP ceramics. J Am Ceram Soc 82: 2150-2154, 1999.
  7. Chevalier J, Gremillard L, Deville S: Low-temperature degradation of zirconia and implications for biomedical implants. Annu Rev Mater Res 37: 1-32, 2007. https://doi.org/10.1146/annurev.matsci.37.052506.084250
  8. Sundh A, Sjogren G: A comparison of yttrium-oxidepartially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramic. J Oral Rehabilitation 31: 682-688, 2004. https://doi.org/10.1111/j.1365-2842.2004.01284.x
  9. De Jager M, Pallav P, Feilzer AJ: The influence of design parameters on the FEA-determined stress distribution in CAD/CAM produced all-ceramic dental crowns. Dent Mater 21: 242-251, 2005. https://doi.org/10.1016/j.dental.2004.03.013
  10. Sailer I, Feher A, Filser F, et al.: Prospective study of zirconia posterior fixed partial dentures: 3-year follow up. Quintessence Int 37: 41-49, 2006.
  11. Hammerle CHF: Success and failure of fixed bridge-work. Periodontal 4: 41-51, 1994. https://doi.org/10.1111/j.1600-0757.1994.tb00004.x
  12. International Organization for Standardization: Ceramic materials, ISO 6872. International Organization for Standardization, Geneva, Switzerland, 2008.
  13. International Organization for Standardization: Implant for surgery ceramic materials based on yttria-stabilized tetragona zirconia (Y-TZP), ISO 13356. International Organization for Standardization, Geneva, Switzerland, 2008.
  14. International Organization for Standardization: Dental Materials-guidance on testing of adhesion to tooth structure, ISO/TR 11405. International Organization for Standardization, Geneva, Switzerland, 1994.
  15. Kern M, Wegner SM: Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14: 64-71, 1998. https://doi.org/10.1016/S0109-5641(98)00011-6
  16. Evans AG, Heuer AH: Review-transformation toughening in ceramics: martensitic transformations in crack-tip stress fields. J Am Ceram Soc 63: 241-248, 1980. https://doi.org/10.1111/j.1151-2916.1980.tb10712.x
  17. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L: The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TPZ zirconia ceramic. Dent Mater 15: 426-433, 1999. https://doi.org/10.1016/S0109-5641(99)00070-6
  18. Sato T, Ohtaki S, Shimada M: Transformation of yttria partially stabilized zirconia by low-temperature annealing in air. J Mater Sci 20: 1466-1470, 1985. https://doi.org/10.1007/BF01026344
  19. Deville S, Chevalier J, Gremillard L: Influence of surface finish and residual stresses on the aging sensitivity of biomedical grade zirconia. Biomaterial 27: 2186-2192, 2006. https://doi.org/10.1016/j.biomaterials.2005.11.021
  20. Michael JT, Christoph B, Michael VS, Norbert T: $XRD^2$ micro-diffraction analysis of the interface between Y-TZP and veneering porcelain: Role of application methods. Dent Mater 26: 545-552, 2010. https://doi.org/10.1016/j.dental.2010.02.002
  21. Kohorst P, Borchers L, Strempel J, et al.: Low-temperature degradation of different zirconia ceramics for dental applications. Acta Biomater 8: 1213-1220, 2012. https://doi.org/10.1016/j.actbio.2011.11.016
  22. Ai-Dohan HM, Yaman P, Dennison JB, et al.: Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent 91: 349-355, 2004. https://doi.org/10.1016/j.prosdent.2004.02.009
  23. Kim KB, Kim JH: A study on the shear bond strength of veneering ceramics to the lithium disilicate (IPS e.max CAD) core. J Dent Hyg Sci 13: 290-295, 2013.