DOI QR코드

DOI QR Code

Optimal Use of MSWI Bottom Ash in Concrete

  • Zhang, Tao (School of Civil and Safety Engineering, Dalian Jiaotong University) ;
  • Zhao, Zengzeng (School of Civil and Safety Engineering, Dalian Jiaotong University)
  • 투고 : 2013.05.20
  • 심사 : 2014.03.03
  • 발행 : 2014.06.30

초록

An experimental investigation was carried out to evaluate the mechanical properties of concrete mixtures in which coarse aggregate was partially (30, 50 or 70 %) replaced with pre-washed municipal solid waste incineration (MSWI) bottom ash. Results indicated that bottom ash reduced the compressive strength, elastic modulus, and levels of heavy metals in leachate when used as a replacement for gravel, and that the maximum amount of MSWI bottom ash in concrete should not exceed 50 %. To analyze the effect mechanism of bottom ash in concrete, the degree of hydration and the following pozzolanic reaction characterized by the pozzolanic activity index, and the porosity distribution in cement mortar. The study indicates that improved properties of concrete are not solely later strength gain and reduced levels of heavy metals in leachate but also the progression of pozzolanic reactions, where a dense structure contains a higher proportion of fine pores that are related to durability.

키워드

참고문헌

  1. Antiohos, S. K., & Tsimas, S. (2007). A novel way to upgrade the coarse part of a high calcium fly ash for reuse into cement systems. Waste Management, 27(5), 675-683. https://doi.org/10.1016/j.wasman.2006.03.016
  2. Bertolini, L., Carsana, M., Cassago, D., Quadrio Curzio, A., & Collepardi, M. (2004). MSWI ashes as mineral additions in concrete. Cement and Concrete Research, 34(10), 1899-1906. https://doi.org/10.1016/j.cemconres.2004.02.001
  3. Bignozzi, M. C., & Saccani, A. (2012). Ceramic waste as aggregate and supplementary cementing material: A combined action to contrast alkali silica reaction (ASR). Cement and Concrete Composites, 34(10), 1141-1148. https://doi.org/10.1016/j.cemconcomp.2012.07.001
  4. Chang, N. B., Wang, H. P., Huang, W. L., & Lin, K. S. (1999). The assessment of reuse potential for municipal solid waste and refuse-derived fuel incineration ashes. Resources, Conservation and Recycling, 25(3-4), 255-270. https://doi.org/10.1016/S0921-3449(98)00066-4
  5. Cheeseman, C. R., Makinde, A., & Bethanis, S. (2005). Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash. Resources, Conservation and Recycling, 43(2), 147-162. https://doi.org/10.1016/j.resconrec.2004.05.004
  6. Cheng, A. (2012). Effect of incinerator bottom ash properties on mechanical and pore size of blended cement mortars. Materials and Design, 36, 859-864. https://doi.org/10.1016/j.matdes.2011.05.003
  7. Cheng, H. F., & Hu, Y. N. (2010). Municipal solid waste (MSW) as a renewable source of energy: Current and future practices in China. Bioresource Technology, 101(11), 3816-3824. https://doi.org/10.1016/j.biortech.2010.01.040
  8. Chimenos, J. M., Segarra, M., Fernandez, M. A., & Espiell, F. (1999). Characterization of the bottom ash in municipal solid waste incinerator. Journal of Hazardous Materials, 64(3), 211-222. https://doi.org/10.1016/S0304-3894(98)00246-5
  9. Ferraris, M., Salvo, M., Ventrella, A., Buzzi, L., & Veglia, M. (2009). Use of vitrified MSWI bottom ashes for concrete production. Waste Management, 29(3), 1041-1047. https://doi.org/10.1016/j.wasman.2008.07.014
  10. Filipponi, P., Polettini, A., Pomia, R., & Sirini, P. (2003). Physical and mechanical properties of cement-based products containing incineration bottom ash. Waste Management, 23(2), 145-156. https://doi.org/10.1016/S0956-053X(02)00041-7
  11. Gerven, T. Y., Keer, E. V., Arickx, S., Jaspers, M., Wauters, G., & Vandecasteele, C. (2005). Carbonation of MSWI-bottom ash to decrease heavy metal leaching, in view of recycling. Waste Management, 25(3), 291-300. https://doi.org/10.1016/j.wasman.2004.07.008
  12. Gines, O., Chimenos, J. M., Vizcarro, A., Formosa, J., & Rosell, J. R. (2009). Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: Environmental and mechanical considerations. Journal of Hazardous Materials, 169(1-3), 643-650. https://doi.org/10.1016/j.jhazmat.2009.03.141
  13. Juric, B., Hanzic, L., Ilic, R., & Samec, N. (2006). Utilization of municipal solid waste bottom ash and recycled aggregate in concrete. Waste Management, 26(12), 1436-1442. https://doi.org/10.1016/j.wasman.2005.10.016
  14. Kula, I., Olgun, A., Erdogan, Y., & Sevinc, V. (2001). Effects of colemanite waste, cool bottom ash, and fly properties of cement. Cement and Concrete Research, 31(3), 491-494. https://doi.org/10.1016/S0008-8846(00)00486-5
  15. Lam, C. H., Barford, J. P., & McKay, G. (2010). Utilization of incineration waste ash residues in Portland cement clinker. Chemical Engineering Transactions, 21, 757-762.
  16. Lee, T. C., Wang, W. J., & Shih, P. Y. (2008). Slag-cement mortar made with cement and slag vitrified from MSWI flyash/ scrubber-ash and glass frit. Construction and Building Materials, 22(9), 1914-1921. https://doi.org/10.1016/j.conbuildmat.2007.07.030
  17. Li, X. G., Lang, L., Ma, B. G., Chen, Q. B., Yin, X. B., & Jian, S. W. (2012). Utilization of municipal solid waste incineration bottom ash in blended cement. Journal of Cleaner Production, 32, 96-100. https://doi.org/10.1016/j.jclepro.2012.03.038
  18. Lin, K. L., Chang, W. C., & Lin, D. F. (2008). Pozzolanic characteristics of pulverized incinerator bottom ash slag. Construction and Building Materials, 22(3), 324-329. https://doi.org/10.1016/j.conbuildmat.2006.08.012
  19. Muller, S., & Rubner, K. (2006). The microstructure of concrete made with municipal waste incinerator bottom ash as an aggregate component. Cement and Concrete Research, 36(8), 1434-1443. https://doi.org/10.1016/j.cemconres.2006.03.023
  20. Pan, J. R., Huang, C., Kuo, J. J., & Lin, S. H. (2008). Recycling MSWI bottom and fly ash as raw materials for Portland cement. Waste Management, 28(7), 1113-1118. https://doi.org/10.1016/j.wasman.2007.04.009
  21. Pecqueur, G., Crignon, C., & Queneeb, B. (2001). Behaviour of cement-treated MSWI bottom ash. Waste Management, 21(3), 229-233. https://doi.org/10.1016/S0956-053X(00)00094-5
  22. Pera, J., Coutaz, L., Ambroise, J., & Chababbet, L. (1997). Use of incinerator bottom ash in concrete. Cement Concrete, 27(1), 1-5. https://doi.org/10.1016/S0008-8846(96)00193-7
  23. Sorlini, S., Abba, A., & Collivignarelli, C. (2011). Recovery of MSWI and soil washing residues as concrete aggregates. Waste Management, 31(2), 289-297. https://doi.org/10.1016/j.wasman.2010.04.019
  24. Valle-Zermeno, R. D., Formosa, J., Chimenos, J. M., Martinez, M., & Fernandez, A. I. (2013). Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material. Waste Management, 33(3), 621-627. https://doi.org/10.1016/j.wasman.2012.09.015
  25. Yang, N., Zhang, H., Chen, M., Shao, L. M., & He, P. J. (2012). Green house gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery. Waste Management, 32(12), 2552-2560. https://doi.org/10.1016/j.wasman.2012.06.008

피인용 문헌

  1. Environmental sustainability assessment of the management of municipal solid waste incineration residues: a review of the current situation vol.17, pp.5, 2014, https://doi.org/10.1007/s10098-015-0961-6
  2. Ability of Two Dam Fine-Grained Sediments to be Used in Cement Industry as Raw Material for Clinker Production and as Pozzolanic Additional Constituent of Portland-Composite Cement vol.8, pp.6, 2014, https://doi.org/10.1007/s12649-017-9870-8
  3. Municipal incinerated bottom ash use as a cement component in concrete vol.69, pp.10, 2014, https://doi.org/10.1680/jmacr.16.00432
  4. Leaching behaviour of municipal solid waste incineration bottom ash: From granular material to monolithic concrete vol.35, pp.9, 2014, https://doi.org/10.1177/0734242x17721340
  5. MSWI Bottom Ash Utilization in Concrete Mixes vol.9, pp.5, 2014, https://doi.org/10.3846/mla.2017.1081
  6. Evaluation of Structural Lightweight Concrete Produced Utilizing Crushed Medical Solid Waste Materials vol.47, pp.4, 2014, https://doi.org/10.1520/jte20170053
  7. The LCA Methodology for Ceramic Tiles Production by Addition of MSWI BA vol.8, pp.2, 2019, https://doi.org/10.3390/resources8020093
  8. Use of incinerated ash as a cement component in concrete: compressive strength modelling vol.71, pp.12, 2014, https://doi.org/10.1680/jmacr.18.00069
  9. Use of incinerated ashes as aggregate in concrete: a compressive strength model vol.71, pp.23, 2019, https://doi.org/10.1680/jmacr.18.00375
  10. Vitrified and nonvitrified municipal solid wastes as ordinary Portland cement (OPC) and sand substitution in mortars vol.17, pp.2, 2014, https://doi.org/10.1111/ijac.13447
  11. Influence of superplasticizer on performance of cement - bottom ash concrete vol.476, pp.None, 2014, https://doi.org/10.1088/1755-1315/476/1/012025
  12. Resources Optimization and Sustainable Waste Management in Construction Chain in Italy: Toward a Resource Efficiency Plan vol.11, pp.10, 2020, https://doi.org/10.1007/s12649-018-0533-1
  13. A review on alternative binders, admixtures and water for the production of sustainable concrete vol.295, pp.None, 2014, https://doi.org/10.1016/j.jclepro.2021.126408
  14. A Review on Cementitious Materials Including Municipal Solid Waste Incineration Bottom Ash (MSWI-BA) as Aggregates vol.11, pp.5, 2014, https://doi.org/10.3390/buildings11050179
  15. Assessment of a Municipal Solid Waste Incinerator Bottom Ash as a Candidate Pozzolanic Material: Comparison of Test Methods vol.13, pp.16, 2021, https://doi.org/10.3390/su13168998
  16. Municipal Solid Waste Incineration Ash-Incorporated Concrete: One Step towards Environmental Justice vol.11, pp.11, 2021, https://doi.org/10.3390/buildings11110495
  17. Production of Portland cement clinker from French Municipal Solid Waste Incineration Bottom Ash vol.15, pp.None, 2021, https://doi.org/10.1016/j.cscm.2021.e00629