DOI QR코드

DOI QR Code

Sensitivity-based reliability analysis of earth slopes using finite element method

  • Ji, Jian (Department of Civil Engineering, Monash University) ;
  • Liao, Hong-Jian (Department of Civil Engineering, Xi'an Jiaotong University)
  • 투고 : 2013.09.21
  • 심사 : 2014.01.12
  • 발행 : 2014.06.25

초록

For slope stability analysis, an alternative to the classical limit equilibrium method (LEM) of slices is the shear strength reduction method (SRM), which can be integrated into finite element analysis or finite difference analysis. Recently, probabilistic analysis of earth slopes has been very attractive because it is capable to take the soil uncertainty into account. However, the SRM is less commonly extended to probabilistic framework compared to a variety of probabilistic LEM analysis of earth slopes. To overcome some limitations that hinder the development of probabilistic SRM stability analysis, a new procedure based on recursive algorithm FORM with sensitivity analysis in the space of original variables is proposed. It can be used to deal with correlated non-normal variables subjected to implicit limit state surface. Using the proposed approach, a probabilistic finite element analysis of the stability of an existing earth dam is carried out in this paper.

키워드

참고문헌

  1. Ang, A.H.-S. and Tang, W.H. (1984), Probability Concepts in Engineering Design, Vol. 2: Decision, Risk and Reliability, Wiley, New York, USA.
  2. Baecher, G.B. and Christian, J.T. (2003), Reliability and Statistics in Geotechnical Engineering, Wiley, Chichester, U.K.
  3. Bhattacharya, G., Jana, D., Ojha, S. and Chakraborty, S. (2003), "Direct search for minimum reliability index of earth slopes", Comput. Geotech., 30(6), 455-462. https://doi.org/10.1016/S0266-352X(03)00059-4
  4. Bucher, C.G. and Bourgund, U. (1990), "A fast and efficient response surface approach for structural reliability problems", Struct. Safety, 7(1), 57-66. https://doi.org/10.1016/0167-4730(90)90012-E
  5. Cheng, Y.M. and Zhu, L.J. (2005), "Unified formulation for two dimensional slope stability analysis and limitations in factor of safety determination", Soil. Found., 44(6), 121-128.
  6. Cho, S.E. (2009), "Probabilistic stability analyses of slopes using the ANN-based response surface", Comput. Geotech., 36(5), 787-797. https://doi.org/10.1016/j.compgeo.2009.01.003
  7. Dawson, E.M., Roth, W.H. and Drescher, A. (1999) "Slope stability analysis by strength reduction", Geotechnique, 49(6), 835-840. https://doi.org/10.1680/geot.1999.49.6.835
  8. Elhewy, A.H., Mesbahi, E. and Pu, Y. (2006), "Reliability analysis of structures using neural network method", Probabilist. Eng. Mech., 21(1), 44-53. https://doi.org/10.1016/j.probengmech.2005.07.002
  9. Goh, A.T.C. and Kulhawy, F.H. (2003), "Neural network approach to model the limit state surface for reliability analysis", Can. Geotech. J., 40(6), 1235-1244. https://doi.org/10.1139/t03-056
  10. Griffiths, D.V. and Fenton, G.A. (2004), "Probabilistic slope stability analysis by finite elements", J. Geotech. Geoenviron. Eng., ASCE, 130(5), 507-518. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:5(507)
  11. Griffiths, D.V. and Lane, P.A. (1999), "Slope stability analysis by finite elements", Geotechnique, 49(3), 387-403. https://doi.org/10.1680/geot.1999.49.3.387
  12. Haldar, A. and Mahadevan, S. (2000), Probability, Reliability and Statistical Methods in Engineering Design, Wiley, New York, USA.
  13. Hasofer, A.M. and Lind, N.C. (1974), "Exact and invariant second moment code format", J. Eng. Mech., ASCE, 100(EM1), 111-121.
  14. Hassan, A.M. and Wolff, T.F. (1999), "Search algorithm for minimum reliability index of earth slopes", J. Geotech. Geoenviron. Eng., ASCE, 125(4), 301-308. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:4(301)
  15. Ji, J. (2013), "Reliability analysis of earth slopes accounting for spatial variation", Ph.D. Dissertation, Nanyang Technological University, Singapore.
  16. Ji, J. and Low, B.K. (2012), "Stratified response surfaces for system probabilistic evaluation of slopes", J. Geotech. Geoenviron. Eng., ASCE, 138(11), 1398-1406. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000711
  17. Ji, J., Liao, H.J. and Low, B.K. (2012), "Modeling 2-D spatial variation in slope reliability analysis using interpolated autocorrelations", Comput. Geotech., 40, 135-146. https://doi.org/10.1016/j.compgeo.2011.11.002
  18. Ji, J., Liao, H.J. and Low, B.K. (2013), "Probabilistic Strength-Reduction Stability Analysis of Slopes Accounting for 2-D Spatial Variation", Key Eng. Mat., 535-536, 582-585. https://doi.org/10.4028/www.scientific.net/KEM.535-536.582
  19. Jiang, S.H., Li, D.Q., Zhang, L.M. and Zhou, C.B. (2014a), "Slope reliability analysis considering spatial variable shear strength parameters using a non-intrusive stochastic finite element method", Eng. Geol., 168, 120-168. https://doi.org/10.1016/j.enggeo.2013.11.006
  20. Jiang, S.H., Li, D.Q., Zhou, C.B. and Zhang, L.M. (2014b), "Capabilities of stochastic response surface method and response surface method in reliability analysis", Struct. Eng. Mech., Int. J., 49(1), 111-128. https://doi.org/10.12989/sem.2014.49.1.111
  21. Li, D., Chen, Y., Lu, W. and Zhou, C. (2011), "Stochastic response surface method for reliability analysis of rock slopes involving correlated non-normal variables", Comput. Geotech., 38(1), 58-68. https://doi.org/10.1016/j.compgeo.2010.10.006
  22. Low, B.K. and Tang, W.H. (2004), "Reliability analysis using object-oriented constrained optimization", Struct. Safety, 26(1), 69-89. https://doi.org/10.1016/S0167-4730(03)00023-7
  23. Low, B.K. and Tang, W.H. (2007), "Efficient spreadsheet algorithm for first-order reliability method", J. Eng. Mech., 133(12), 1378-1387. https://doi.org/10.1061/(ASCE)0733-9399(2007)133:12(1378)
  24. Matsui, T. and San, K.-C. (1992), "Finite element slope stability analysis by shear strength reduction technique", Soil. Found., 32(1), 59-70. https://doi.org/10.3208/sandf1972.32.59
  25. Naylor, D.J. (1982), "Finite elements and slope stability", Numer. Meth. Geomech., 92, 229-244.
  26. Rackwitz, R. (1976), "Practical probabilistic approach to design", Comite European du Beton, Paris, France.
  27. Rackwitz, R. and Fiessler, B. (1978), "Structural reliability under combined random load sequences", Comput. Struct., 9(5), 484-494.
  28. Rajashekhar, M.R. and Ellingwood, B.R. (1993), "A new look at the response surface approach for reliability analysis", Struct. Safety, 12(3), 205-220. https://doi.org/10.1016/0167-4730(93)90003-J
  29. Ugai, K. (1989), "A method of calculation of total factor of safety of slopes by elasto-plastic FEM", Soil. Found., 29(2), 190-195. https://doi.org/10.3208/sandf1972.29.2_190
  30. Wolff, T.F. (1985), "Analysis and design of embankment dam slopes: A probabilistic approach", Ph.D. Dissertation, Purdue University, West Lafayette, IN, United States.
  31. Xu, B. and Low, B.K. (2006), "Probabilistic stability analyses of embankments based on finite-element method", J. Geotech. Geoenviron. Eng., 132(11), 1444-1454. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:11(1444)
  32. Zheng, Y.R. and Zhao, S.Y. (2004), "Application of strength reduction FEM in soil and rock slope", Chinese J. Rock Mech. Eng., 23(19), 3381-3388.
  33. Zienkiewicz, O.C., Humpheson, C. and Lewis, R.W. (1975). "Associated and non-associated viscoplasticity and plasticity in soil mechanics", Geotechnique, 25(4), 671-689. https://doi.org/10.1680/geot.1975.25.4.671

피인용 문헌

  1. Seismic response of geosynthetic reinforced retaining walls vol.10, pp.5, 2016, https://doi.org/10.12989/gae.2016.10.5.635
  2. Long embankment failure accounting for longitudinal spatial variation – A probabilistic study vol.61, 2014, https://doi.org/10.1016/j.compgeo.2014.05.001
  3. An algorithm in generalized coordinate system and its application to reliability analysis of seismic slope stability of high rockfill dams vol.188, 2015, https://doi.org/10.1016/j.enggeo.2015.01.019
  4. Locating the Multiple Failure Surfaces for Slope Stability Using Monte Carlo Technique vol.34, pp.5, 2016, https://doi.org/10.1007/s10706-016-0055-1
  5. Reliability analysis of a mechanically stabilized earth wall using the surface response methodology optimized by a genetic algorithm vol.15, pp.4, 2014, https://doi.org/10.12989/gae.2018.15.4.937
  6. Three-dimensional simplified slope stability analysis by hybrid-type penalty method vol.15, pp.4, 2018, https://doi.org/10.12989/gae.2018.15.4.947
  7. Reliability-Based Stability Assessment of Natural Slopes vol.49, pp.6, 2014, https://doi.org/10.1007/s40098-019-00352-y
  8. Time-variant failure probability of critical slopes under strong rainfall hazard including mitigation effects vol.16, pp.10, 2020, https://doi.org/10.1080/15732479.2020.1712736
  9. Importance sampling for system reliability analysis of soil slopes based on shear strength reduction vol.15, pp.4, 2021, https://doi.org/10.1080/17499518.2020.1780618