DOI QR코드

DOI QR Code

Stress and strain state in the segmental linings during mechanized tunnelling

  • Received : 2013.10.27
  • Accepted : 2014.03.07
  • Published : 2014.07.25

Abstract

The application of the mechanized tunnelling has been extended in recent years. There are at present different approaches that are used in the design of segmental tunnel linings supported in mechanized tunnels. Even though segmental lining is utilized for mechanized tunnels, its behaviour is still quite unclear under in situ stress and there is a lack of data regarding the distribution of stresses inside segmental linings. So far no single effective calculation method exists for segmental lining design. The lack of clear solutions makes the use of segmental lining to be more expensive due to the adoption of greater safety factors. Therefore, a particular attention must be given in order to obtain data from monitored tunnels which permits to validate design methods. In this study, strain measurements, which were conducted during the construction of twin tunnels in the Bologna-Florence railway line, have been presented. The behaviour of segmental lining during the excavation and the influence of a new tunnel excavation on an existing tunnel have been shown through the measured data. The data are then compared with the results obtained with Einstein and Schwartz's method and Duddeck and Erdmann's method, which permits to highlight the fact that the two analytical methods underestimate structural forces induced in the segmental lining and then must be used with caution.

Keywords

References

  1. Bakker, K.J. (2003), "Structural design of linings for bored tunnel in soft ground", Heron, 48(1), 33-63.
  2. Bilotta, E. and Russo, G. (2012), "Back calculation of internal forces in the segmental lining of a tunnel: The experience of Line 1 in Naples", Geotechnical Aspects of Underground Construction in Soft Ground - Viggiani (ed) ${\copyright}$ 2012 Taylor & Francis Group, London, UK. ISBN: 978-0-415-68367-8, 213-221
  3. Bilotta, E. and Russo, G. (2013), "Internal forces arising in the segmental lining of an EPB bored tunnel", J. Geotech. Geoenviron. Eng., 139(10), 1765-1780. DOI: 10.1061/(ASCE)GT.1943-5606.0000906
  4. Borgonovo, G., Contini, A., Locatelli, L., Marco, P. and Ramelli, E. (2007), "Monitoring used as an alarm system in tunnelling", Rapid Excavation & Tunnelling Conference and Exhibit, Toronto, Canada, June, pp. 381-395.
  5. BTS (The British Tunnelling Society and The Institution of Civil Engineers) (2004), Tunnel Lining Design Guide, Thomas Telford Publishing, London, UK. ISBN: 0 7277 2986 1
  6. Croce, A. (2011), "Analisi dati di monitoraggio del rivestimento della galleria del passante ferroviario di Bologna", Degree Dissertation, Polytechnics of Turin, Italy. [In Italian]
  7. Dias, D. and Kastner, R. (2013), "Movements caused by the excavation of tunnels using face pressurized shields - Analysis of monitoring and numerical modelling results", Eng. Geol., 152(1), 17-25. DOI: 10.1016/j.enggeo.2012.12.002
  8. Dias, D. and Oreste, P.P. (2013), "Key factors in the face stability analysis of shallow tunnels", Am. J. Appl. Sci., 10(9), 1025-1038. https://doi.org/10.3844/ajassp.2013.1025.1038
  9. Dias, D., Kastner, R. and Maghazi, M. (2000), "Three-dimensional simulation of slurry shield tunnelling", Geotechnical Aspects of Underground Construction in Soft Ground, Kusakabe, Fujita and Miyazaki (eds.), Balkema, Rotterdam, pp. 351-356.
  10. Do, N.A., Dias, D., Oreste, P.P. and Djeran-Maigre, I. (2013a), "2D numerical investigation of segmental tunnel lining behavior", Tunnel. Undergr. Space Tech., 37, 115-127. https://doi.org/10.1016/j.tust.2013.03.008
  11. Do, N.A., Dias, D., Oreste, P.P. and Djeran-Maigre, I. (2013b), "Three-dimensional numerical simulation for mechanized tunnelling in soft ground - The influence of the joints", Acta Geotechnica. DOI: 10.1007/s11440-013-0279-7
  12. Do, N.A., Dias, D., Oreste, P.P. and Djeran-Maigre, I. (2014a), "2D numerical investigations of twin tunnel interaction", Geomech. Eng., Int. J., 6(3), 263-275. https://doi.org/10.12989/gae.2014.6.3.263
  13. Do, N.A., Dias, D., Oreste, P.P. and Djeran-Maigre, I. (2014b), "Three-dimensional numerical simulation of a mechanized twin tunnels in soft ground", Tunnel. Undergr. Space Tech., 42, 40-51. DOI: 10.1016/j.tust.2014.02.001
  14. Duddeck, H. and Erdmann, J. (1985), "Structural design models for tunnels", Undergr. Space, 9(5-6), 246-253.
  15. Einstein, H.H. and Schwartz, C.W. (1979), "Simplified analysis for tunnel supports", J. Geotech. Eng. Div., 105(4), 499-517.
  16. Hefny, A.M., Chua, H.C., Jhao, J. (2004), "Parametric studies on the interaction between Existing and new bored tunnels", Tunnel. Undergr. Space Tech., 19(4-5), 471. https://doi.org/10.1016/j.tust.2004.02.074
  17. Huang, Z.R., Zhu, W., Liang, J.H., Lin, J. and Jia, R. (2006), "Three dimensional numerical modelling of shield tunnel lining", Tunnelling and Underground Space Technology, 21(3-4), 434-434. https://doi.org/10.1016/j.tust.2005.12.076
  18. Liu, J.H. and Hou, X.Y. (1991), Shield-Driven Tunnels, China Railway Press, Beijing, China.
  19. Mollon, G., Dias, D. and Soubra, A. (2013), "Probabilistic analyses of tunneling-induced ground movements", Acta Geotechnica, 8(2), 181-199. DOI: 10.1007/s11440- 012-0182-7
  20. Muir Wood, A. (1975), "The circular tunnel in elastic ground", Geotechnique, 25(1), 115-127. https://doi.org/10.1680/geot.1975.25.1.115
  21. Naggar, H.E. and Hinchberger, S.D. (2008), "An analytical solution for jointed tunnel linings in elastic soil or rock", Can. Geotech. J., 45(11), 1572-1593. https://doi.org/10.1139/T08-075
  22. Oreste, P.P. (2013), "Face stabilization of deep tunnels using longitudinal fibreglass dowels", Int. J. Rock Mechan. Min. Sci., 58, 127-140. DOI: 10.1016/j.ijrmms.2012.07.011
  23. Oreste, P.P. and Dias, D. (2012), "Stabilisation of the excavation face in shallow tunnels using fibreglass dowels", Rock Mech. Rock Eng., 45(4), 499-517. DOI: 10.1007/s00603-012-0234-1
  24. Roland, D.W. (1999), "Steel fibre reinforced tunnel segment for the application in the shield driven tunnel", Ph.D. Thesis, DUP, Delft, Netherlands. ISBN: 90-407-1965-9
  25. Sugimoto, M. (2006), "Causes of shield segment damages during construction", International Symposium on Underground Excavation and Tunnelling, Bangkok, Thailand, February, pp. 67-74.
  26. Takano, Y. (2000), "Guidelines for the design of shield tunnels", Tunnel. Undergr. Space Tech., 15(3), 303-331. https://doi.org/10.1016/S0886-7798(00)00058-4
  27. Teachavorasinskun, S. and Chub-Uppakarn, T. (2009), "Experimental verification of joint effects on segmental tunnel lining", Electr. J. Geotech. Eng., 14.
  28. Teachavorasinskun, S. and Chub-Uppakarn, T. (2010), "Influence of segmental joints on tunnel lining", Tunnel. Undergr. Space Tech., 25(4), 490-494. https://doi.org/10.1016/j.tust.2010.02.003
  29. Thienert, C. and Pulsfort, M. (2011), "Segment design under consideration of the material used to fill the annular gap", Geomech. Tunnel., 4(6), 665-680. https://doi.org/10.1002/geot.201100050

Cited by

  1. New reinforcement algorithms in discontinuous deformation analysis for rock failure vol.11, pp.6, 2016, https://doi.org/10.12989/gae.2016.11.6.787
  2. Numerical analysis of water flow characteristics after inrushing from the tunnel floor in process of karst tunnel excavation vol.10, pp.4, 2016, https://doi.org/10.12989/gae.2016.10.4.471
  3. Comparison of the structural behavior of reinforced concrete and steel fiber reinforced concrete tunnel segmental joints vol.68, 2017, https://doi.org/10.1016/j.tust.2017.05.010
  4. Spatial variability analysis of soil strength to slope stability assessment vol.12, pp.3, 2014, https://doi.org/10.12989/gae.2017.12.3.483
  5. Experimental study on the mechanical response and failure behavior of double-arch tunnels with cavities behind the liner vol.20, pp.5, 2014, https://doi.org/10.12989/gae.2020.20.5.399
  6. Seismic performances of three- and four-sided box culverts: A comparative study vol.22, pp.1, 2014, https://doi.org/10.12989/gae.2020.22.1.049
  7. Influence of Loose Contact between Tunnel Lining and Surrounding Rock on the Safety of the Tunnel Structure vol.12, pp.10, 2014, https://doi.org/10.3390/sym12101733
  8. Three-dimensional finite element analysis of urban rock tunnel under static loading condition: Effect of the rock weathering vol.25, pp.2, 2014, https://doi.org/10.12989/gae.2021.25.2.099
  9. Earth Pressure and Internal Forces of Tunnel Lining in Jet Grouting Reinforced Mud Stratum vol.25, pp.10, 2014, https://doi.org/10.1007/s12205-021-2014-5