References
- P. G. de Gennes, "The Physics of Liquid Crystals", Oxford University Press, Belfast, Ireland, 1993.
- E. Douglas, D. Langlois, and B. Benicewicz, “Synthesis, Phase Behavior, and Curing Studies of Bisacetylene Rigid- Rod Thermosets”, Chem Mater, 1994, 6, 1925−1933. https://doi.org/10.1021/cm00047a007
- H. Körner, A. Shiota, T. J. Bunning, and C. K. Ober, “Orientation-On-Demand Thin Films: Curing of Liquid Crystalline Networks in ac Electric Fields”, Science, 1996, 272(5259), 252−255. https://doi.org/10.1126/science.272.5259.252
- D. Langlois, C. Brian, B. Benicewicz, and E. Douglas, “Liquid Crystalline Bispropargyl Thermosets”, Chem Mater, 1998, 10, 3393−3399. https://doi.org/10.1021/cm980087b
- A. E. Hoyt and B. C. Benicewicz, “Rigid Rod Molecules as Liquid Crystal Thermosets. I. Rigid Rod Amides”, J Polym Sci Part A: Polym Chem, 1990, 28(12), 3403−3415. https://doi.org/10.1002/pola.1990.080281218
- E. A. Hoyt and B. C. Benicewicz, “Rigid Rod Molecules as Liquid Crystal Thermosets. II. Rigid Rod Esters”, J Polym Sci Part A: Polym Chem, 1990, 28(12), 3417−3427. https://doi.org/10.1002/pola.1990.080281219
- R. A. M. Hikmet, J. Lub, and J. A. Higgins, “Anisotropic Networks Obtained by in situ Cationic Polymerization of Liquid-crystalline Divinyl Ethers”, Polymer, 1993, 34(8), 1736−1740. https://doi.org/10.1016/0032-3861(93)90334-7
- G. G. Barclay, C. K. Ober, K. I. Papathomas, and D. W. Wang, "Liquid, Crystalline Epoxy Thermosets Based on Dihydroxymethylstilbene: Synthesis and Characterization", J Polym Sci Part A: Polym Chem, 1992, 30, 1831-1843. https://doi.org/10.1002/pola.1992.080300906
- C. Carfagna, E. Amendola, M. Giamberini, A. G. Filippov, and R. S. Bauer, “Curing Kinetics of Liquid-crystalline Epoxy Resins”, Liquid Crystals, 1993, 13(4), 571−584. https://doi.org/10.1080/02678299308026329
-
E. Amendola, C. Carfagna, M. Giamberini, and G. Pisaniello, "Curing Reactions of a Liquid Crystalline Epoxy Resin Based on the Diglycidyl Ether of 4,4′- dihydroxy-
$\alpha$ -methylstilbene", Macromol Chem Phys, 1995, 196, 1577−1591. https://doi.org/10.1002/macp.1995.021960516 - S. Cho, J. Lee, and E. Douglas, “Synthesis and Thermal Properties of LCT Containing Rigid-rod Epoxy”, High Perform Polym, 2006, 18, 82−99.
- S. Byun and S. Cho, "Activation Energies of LCT Containing Rigid-rod Epoxy", Adv Mat Res, 2011, 378− 379, 628−631. https://doi.org/10.4028/www.scientific.net/AMR.378-379.628
- C. Carfagna, E. Amendola, and M. Giamberini, “Rigid Rod Networks: Liquid Crystalline Epoxy Resins”, Compos Struct, 1994, 27, 37−43. https://doi.org/10.1016/0263-8223(94)90064-7
- D. Chen, X. Gao, and D. Dollimore, “Computer Programs for Kinetic Analysis of Non-isothermal Thermogravimetric Data”, Anal Instrum, 1992, 20, 137−152. https://doi.org/10.1080/10739149208543748
- N. Sbirrazzuoli, L. Vincent, A. Mija, and N. Guigo, “Integral, Differential and Advanced Isoconversional Methods Complex Mechanisms and Isothermal Predicted Conversion-time Curves”, Chem Intel Lab Sys, 2009, 96, 219−226. https://doi.org/10.1016/j.chemolab.2009.02.002
- J. H. Flynn and L. A. Wall, "A Quick, Direct Method for the Determination of Activation Energy from Thermogravimetric Data", J Polym Sci Part B: Polym Lett, 1966, 4, 323-328. https://doi.org/10.1002/pol.1966.110040504
- T. F. Mika, R. S. Bauer, and C. A. May, Eds., "Epoxy Resins, Chemistry and Technology", Dekker, New York, 1988, p. 465.
- S. Vyazovkin and N. Sbirrazzuoli, "Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Poymers", Macromol Rapid Comm, 2006, 27, 1515-1532. https://doi.org/10.1002/marc.200600404
Cited by
- Thermal Degradation Behavior of Composites with Liquid Crystalline Epoxy and Aluminum Nitride vol.749, pp.1662-7482, 2015, https://doi.org/10.4028/www.scientific.net/AMM.749.299