DOI QR코드

DOI QR Code

Express Train Seat Discomfort Evaluation using Body Pressure and Anthropometric Data

  • Received : 2014.02.12
  • Accepted : 2014.06.12
  • Published : 2014.06.30

Abstract

Objective: The purpose of this study was to evaluate Korea's Honam express train's first- and second-class seat discomfort by using pressure measurement, subjective discomfort rating, and physical compatibility. Background: Over the years, the demand for an express train service is continually increasing. A comfortable ride is important to achieving passenger satisfaction. A train seat plays a significant role in fulfilling passenger seating comfort. With this in view, a field survey and pressure measurements were performed on the selected train seat. Method: The pressure ratio at the body-seat interface (thigh and buttock regions) was measured by the pressure mat system. The interface pressure ratio was calculated and compared. The subjective discomfort rating scale was used to evaluate the subjects' overall feeling. The dimensions of train seats were analysed according to the anthropometric and demographic characteristics of the population data from Size Korea. Results: The results highlighted that the interface pressure ratio was greater while participants sat on the second-class seat than the first-class seat in the left- and right-side thigh regions. Also the pressure ratio was greater for the participants in the 1st~25th percentile height groups (149.8~160.8cm). The subjects rated higher discomfort for the second-class seat than the first-class seat. The physical compatibility results showed that the second-class seat's breadth was inadequate for the 95th and 99th percentile male. Conclusion: Overall, interface pressure measurement, subjective discomfort score and physical compatibility results showed that the second-class seat was more uncomfortable for the passengers than the first-class seat. Application: The adopted methodologies could be used to measure the seating comfort of the train seats.

Keywords

References

  1. Andrew, I. and Manoy, R., Anthropometric survey of British rail footplate staff, Applied Ergonomics, 3(3), 132-135, 1972. https://doi.org/10.1016/S0003-6870(72)80002-4
  2. Brienze, D.M., Karg, P.E., Geyer, M.J., Kelsey, S. and Trefler, E., The relationship between pressure ulcer incidence and buttock-seat cushion interface pressure in at-risk elderly wheelchair users, Archives of Physical Medicine and Rehabilitation, 82(4), 529-533, 2001. https://doi.org/10.1053/apmr.2001.21854
  3. British Standards Institution, BS6841, Measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock, 1987.
  4. Code, U.I.C., Guidelines for evaluating passenger comfort in relation to vibration in railway vehicles. International Unions Railways, 1995.
  5. Dhingra, H., Tewari, V. and Singh, S., Discomfort, pressure distribution and safety in operator's seat - a critical review, Agricultural Engineering International: the CIGR Journal of Scientific Research and Development, Invited Overview Paper, Vol. V, 2003.
  6. Dunk, N.M. and Callaghan, J.P., Gender-based differences in postural responses to seated exposures. Clinical Biomechanics, 20(10), 1101-1110, 2005. https://doi.org/10.1016/j.clinbiomech.2005.07.004
  7. Ebe, K. and Griffin, M.J., Qualitative models of seat discomfort including static and dynamic factors, Ergonomics, 43(6), 771-790, 2000. https://doi.org/10.1080/001401300404742
  8. Eitzen, I., Pressure mapping in seating: a frequency analysis approach, Archives of Physical Medicine and Rehabilitation, 85(7), 1136-1140, 2004. https://doi.org/10.1016/j.apmr.2003.09.007
  9. Hacaambwa, T.M. and Giacomin, J., Subjective response to seated fore-and-aft direction whole-body vibration, International Journal of Industrial Ergonomics, 37(1), 61-72, 2007. https://doi.org/10.1016/j.ergon.2006.09.017
  10. International Organization for Standardization, ISO2631, Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration, 1997.
  11. Jahansson, A. and Nilsson, L., Evaluation of discomfort using real-time measurements of whole body vibration and seat pressure distribution while driving trucks (master's thesis), Lulea University of Technology, Gothenburg, Sweden, 2006.
  12. Kim, T.H., Cho, Y.G., Yoon, Y.S. and Park, S.J., Dynamic ride quality investigation and DB of ride values for passenger and RV cars, SAE Technical Paper 2001-01-0384, 2001.
  13. Kolich, M., A conceptual framework proposed to formalize the scientific investigation of automobile seat comfort, Applied Ergonomics, 39(1), 15-27, 2008. https://doi.org/10.1016/j.apergo.2007.01.003
  14. Kumar, A., Bush, N.J. and Thakurta, K., Characterization of occupant comfort in automotive seats, Automotive Body Interior and Safety Systems, IBEC 1994, 1-4, 1994.
  15. Kyung, G. and Nussbaum, M.A., Driver sitting comfort and discomfort (part II): relationships with and prediction from interface pressure, International Journal of Industrial Ergonomics, 38(5), 526-538, 2008. https://doi.org/10.1016/j.ergon.2007.08.011
  16. Mehta, C.R. and Tewari, V.K., Seating discomfort for tractor operators - a critical review, International Journal of Industrial Ergonomics, 25(6), 661-674, 2000. https://doi.org/10.1016/S0169-8141(99)00054-2
  17. Na, S., Lim, S., Choi, H.S. and Chung, M.K., Evaluation of driver's discomfort and postural change using dynamic body pressure distribution, International Journal of Industrial Ergonomics, 35(12), 1085-1096, 2005. https://doi.org/10.1016/j.ergon.2005.03.004
  18. Nahvi, H, Nor, M.J.M., Fouladi, M.H. and Abdullah, S., Evaluating automobile road vibrations using BS 6841 and ISO 2631 comfort criteria, In 1st Regional Conference on Vehicle Engineering & Technology, Kuala Lumpur, Malaysia, 2006.
  19. Park, S.J. and Kim, C.B., The evaluation of seating comfort by the objective measures, SAE Technical Paper, SAE Technical Paper 970595, 1997.
  20. Park, S.J. and Subramaniyam, M., Evaluating methods of vibration exposure and ride comfort in car, Journal of the Ergonomics Society of Korea, 32(4), 381-387, 2013. https://doi.org/10.5143/JESK.2013.32.4.381
  21. Park, S.J. and Subramaniyam, M., Ride quality investigation of passenger cars on different road conditions, Journal of the Ergonomics Society of Korea, 32(4), 389-396, 2013. https://doi.org/10.5143/JESK.2013.32.4.389
  22. Park, S.J., Cheung, W.S., Cho, Y.G. and Yoon, Y.S., Dynamic ride quality investigation for passenger car, SAE Technical Paper 980660, 1998.
  23. Park, S.J., Min, B.C., Lee, J.K. and Kang, E.S., Development of evaluating system for ride comfort and fatigue in vehicle, SAE Technical Paper 2001-01-0388, 2001.
  24. Seigler, T.M., A comparative analysis of air-inflated and foam seat cushions for truck seats (doctoral dissertation), Virginia Polytechnic Institute and State University, 2002.
  25. Shen, W. and Galer, I.A., Development of a pressure related assessment model of seating discomfort, In Proceedings of the Human Factors and Ergonomics Society Annual Meeting, SAGE Publication, 37(10), 831-835, 1993.
  26. Stinson, M.D., Porter-Armstrong, A. and Eakin, P., Seat-interface pressure: a pilot study of the relationship of gender, body mass index, and seating position, Archives of Physical Medicine and Rehabilitation, 84(3), 405-409, 2003. https://doi.org/10.1053/apmr.2003.50011
  27. Vos, G.A., Congleton, J.J., Steven Moore, J., Amendola, A.A. and Ringer, L., Postural versus chair design impacts upon interface pressure, Applied Ergonomics, 37(5), 619-628, 2006. https://doi.org/10.1016/j.apergo.2005.09.002
  28. Wu, X., Rakheja, S. and Boileau, P.E., Study of human-seat interface pressure distribution under vertical vibration, International Journal of Industrial Ergonomics, 21(6), 433-449, 1998. https://doi.org/10.1016/S0169-8141(96)00084-4
  29. Yong, W.H., Ming, W.X. and Jian-wu, D., Multidimensional coefficient approach to comfort evaluating for high-speed train, TELKOMNIKA Indonesian Journal of Electrical Engineering, 12(3), 2036-2041, 2014.
  30. Ziolek, S. and Wawrow, P., Beyond percentiles: an examination of occupant anthropometry and seat design, SAE Technical Paper 2004-01-0375, 2004.