DOI QR코드

DOI QR Code

The use of artificial neural networks in predicting ASR of concrete containing nano-silica

  • 투고 : 2013.07.29
  • 심사 : 2014.05.22
  • 발행 : 2014.06.25

초록

In this article, by using experimental studies and artificial neural network has been tried to investigate the use of nano-silica as concrete admixture to reduce alkali-silica reaction. If there are reactive aggregates and alkali of cement with enough moisture in concrete, a gel will be formed. Then with high reactivity between alkali of cement and existence of silica in aggregates, this gel will expand by absorption of water, and causes expansive pressure and cracks be formed. At the time passes, this gel will reduce both durability and strength of the concrete. By reducing the size of silicate to nano, specific surface area of particles and number of atoms on the surface will be increased, which causes more pozzolanic activity of them. Nano-silica can react with calcium hydroxide ($Ca(OH)_2$) and produces C-S-H gel. In this study, accelerated mortar bar specimens according to ASTM C 1260 and ASTM C 1567, with different mix proportions were prepared using aggregates of Kerman, such as: none admixture and plasticizer, different proportions of nano-silica separately. By opening the moulds after 24 hour and curing in water at $80^{\circ}C$ for 24 hour, then curing in (1N NaOH) at $80^{\circ}C$ for 14 days, length expansion of mortar bars were measured and compared. It was noted that, the lowest length expansion of a specimens shows the best proportion of admixture based on alkali-silica reactivity. Then, prediction of alkali-silica reaction of concrete has been investigated by using artificial neural network. In this study the backpropagation network has been used and compared with different algorithms to train network. Finally, the best amount of nano silica for adding to mix proportion, also the best algorithm and number of neurons in hidden layer of artificial neural network have been offered.

키워드

참고문헌

  1. Alavi, R. and Mirzadeh, H. (2012), "Modeling the compressive strength of cement mortar nano-composites", Comput. Concrete, 10(1), 49-57. https://doi.org/10.12989/cac.2012.10.1.049
  2. Al-Chaar, G.K., Alkadi, M. and Asteris, P.G. (2013), "Natural pozzolan as a partial substitute for cement in concrete", Open Construct. Build. Tech. J., 7(1), 33-42. https://doi.org/10.2174/1874836801307010033
  3. ASTM C 1260 (1994), Standard Test Method for Potential Alkali Reactivity of Aggregate (mortar-bar method), American Society for Testing Materials, Philadelphia, PA, USA.
  4. ASTM C 1567 (2004), Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method), American Society for Testing Materials, Philadelphia, PA, USA.
  5. Beale, M.H., Hagan, M.T. and Demuth, H.B. (2010), Neural Network $Toolbox^{TM}$ User's Guide - Mathworks, The MathWorks, Inc., Natick M.A.
  6. Boukhatem, B., Kenai, S., Hamou, A., Ziou, D. and Ghrici, M. (2012), "Predicting concrete properties using neural networks (NN) with principal component analysis (PCA) technique" Comput. Concrete, 10(6), 557-573. https://doi.org/10.12989/cac.2012.10.6.557
  7. Firouzi, A. and Rahai, A. (2013), "Reliability assessment of concrete bridges subject to corrosion-induced cracks during life cycle using artificial neural networks", Comput. Concrete, 12(1), 91-107. https://doi.org/10.12989/cac.2013.12.1.091
  8. ISIR 8753 (1993), Aggregate - Potential Alkali Reactivity of Aggregates Accelerated (mortar-bar method) Test Method, Institute of Standard and Industrial Research of Iran, 1st edition, Tehran, Iran.
  9. Kosmatka, S.H., Kerkhoff, B. and Panarese, W.C. (2003), Design and Control of Concrete Mixtures, Portland Cement Association, Skokie, Illinois, USA.
  10. Lukschova, S., Prikryl, R. and Pertold, Z. (2009), "Petrographic identification of alkali-silica reactive aggregates in concrete from 20th century bridges", Constr. Build. Mater., 23(1), 734-741. https://doi.org/10.1016/j.conbuildmat.2008.02.020
  11. Maghsoudi, A.A. and Ahmadi Mogadam, H. (2007), "Application of nano particles and its effect on mechanical properties of conventional concrete dams containing pozzolans", 1st National conference on dams and hydraulic structures, Karaj, Iran, November.
  12. Maheswaran, S., Bhuvaneshwari, B., Palani, G.S., Nagesh, R Iyer, 1 and Kalaiselvam, S. (2013), "An overview on the influence of nano silica in concrete and a research initiative", Res. J. Recent Sci., 2(ISC- 2012), 17-24.
  13. Qurecaia, G. and Brouwers, H. (2010), "Application of nano-silica (nS) in concrete mixtures", 7th fib PhD Symposium in Kgs. Lyngby, Denmark, June.
  14. Ramazanianpour, A., Moraveji, S.M. and Mahdikhani, M. (2009), "Effect of nano silica and micro silica on microstructure and durability of concrete", Proceeding of the 1th international conference of concrete technology, Tabriz, Iran, November.
  15. Ramazanianpour, A. and Rahmani, H. (2006), "Application of statistical method for predicting compressive strength and abrasion using neural network", 7th International congress on civil engineering, Tehran, Iran, May.
  16. Ramazanianpour, A. and Sadeghi, K. (2006), "Application of artificial neural networks in roller concrete mix design", 7th International congress on civil engineering, Tehran, Iran, May.
  17. Van Dam, T. and Peshkin, D. (2009), Concrete Aggregate Durability Study, Final report 575, Applied pavement technology.

피인용 문헌

  1. Fracture energy and tension softening relation for nano-modified concrete vol.54, pp.6, 2015, https://doi.org/10.12989/sem.2015.54.6.1201
  2. Modelling fresh properties of self-compacting concrete using neural network technique vol.18, pp.6, 2016, https://doi.org/10.12989/cac.2016.18.6.903
  3. Modelling fresh properties of self-compacting concrete using neural network technique vol.18, pp.4, 2014, https://doi.org/10.12989/cac.2016.18.4.903
  4. Modeling of mechanical properties of roller compacted concrete containing RHA using ANFIS vol.19, pp.4, 2014, https://doi.org/10.12989/cac.2017.19.4.435
  5. Evaluation of concrete compressive strength based on an improved PSO-LSSVM model vol.21, pp.5, 2014, https://doi.org/10.12989/cac.2018.21.5.505
  6. Neuro-fuzzy model of concrete exposed to various regimes combined with De-icing salts vol.21, pp.6, 2014, https://doi.org/10.12989/cac.2018.21.6.649
  7. Neuro-fuzzy based approach for estimation of concrete compressive strength vol.21, pp.6, 2014, https://doi.org/10.12989/cac.2018.21.6.697
  8. Compressive Strength Prediction of Nanosilica-Incorporated Cement Mixtures Using Adaptive Neuro-Fuzzy Inference System and Artificial Neural Network Models vol.25, pp.3, 2014, https://doi.org/10.1061/(asce)sc.1943-5576.0000499
  9. Strength and strain modeling of CFRP -confined concrete cylinders using ANNs vol.27, pp.3, 2014, https://doi.org/10.12989/cac.2021.27.3.225