한국생산제조학회지 (Journal of the Korean Society of Manufacturing Technology Engineers)

  • 제23권3호
  • /
  • Pages.291-298
  • /
  • 2014
  • /
  • 2508-5093(pISSN)
  • /
  • 2508-5107(eISSN)
한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지
DOI QR코드

DOI QR Code

V-Groove 패턴을 위한 마이크로 사출성형의 폴리머 멜트 충전 거동

Filling Behavior of Polymer Melt in Micro Injection Molding for V-Grooves Pattern

  • Kim, Moo Sun (Future Metropolitan Railroad System Research Division, Metropolitan transportation Research Center, Korea Railroad Research Institute) ;
  • Kim, Seung Mo (School of Mechanical Engineering, Korea University of Technology and Education)
  • 투고 : 2014.03.22
  • 심사 : 2014.05.07
  • 발행 : 2014.06.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study uses two numerical approaches to analyze the filling behavior of micro patterns on micro-injection molding for V-grooves pattern which cannot be simulated with conventional CAE packages. The parametric studies have been performed to examine the fidelity of micro patterns with respect to temperature, pressure, inlet velocity and pattern location on the mold according to the boundary condition from the macro pressure and velocity data which can be obtained by conventional CAE packages. Through these numerical approaches, the filling behavior of polymer melt in micro patterns can be understood, the quality of replication can be predicted, and the V-groove pattern can be shaped uniformly during the process of injection molding.

키워드

참고문헌

  1. Su, Y.-C., Shah, J., Lin, L., 2004, Implementation and analysis of polymeric microstructure replication by micro injection molding, J. Micromech. Microeng. 14 415-422. https://doi.org/10.1088/0960-1317/14/3/015
  2. Yu, L., Lee, L. J., Koelling, K. W., 2004, Flow and Heat Transfer Simulation of Injection Molding With Microstructures, Polymer Engineering and Science 44:10 1866-1876. https://doi.org/10.1002/pen.20188
  3. Dantzig, J. A., Tucker, C. L., 2001, Modeling in Materials Processing, Cambridge University Press, Cambridge.
  4. Steinbach, J., 1998, A generalized temperature-dependent, non- Newtonian Hele-Shaw flow in injection and compression moulding, Mathematical Methods in the Applied Sciences 20:14 1199-1222.
  5. Lee, H. S., 1997, Finite element analysis for the flow characteristics along the thickness direction in injection molding, Polymer Engineering & Science 37:3 559-567. https://doi.org/10.1002/pen.11699
  6. Woo, M. H., 1996, Analysis of free surface formation during non-isothermal unsteady mold filling process, Master Thesis, Seoul National University, Republic of Korea.
  7. Reddy, J. N., Gartling, D. K., 1994, The Finite Element Method in Heat Transfer and Fluid Dynamics, CRC Press: Boca Raton, FL.
  8. Reddy, J. N., 1982, On penalty function methods in the finite-element analysis of flow problems, International Journal for Numerical Methods in Fluids 2:2 151-171. https://doi.org/10.1002/fld.1650020204
  9. Hirt, C. W., Nichols, B. D., 1981, Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of computational Physics 39 201-225. https://doi.org/10.1016/0021-9991(81)90145-5
  10. Park, J. S., Kim, S. M., Kim, M. S., Lee, W. I., 2005, Finite element analysis of flow and heat transfer with moving free surface using fixed grid system, Int. J. Comput. Fluid Dynamics 19 263-276. https://doi.org/10.1080/10618560410001730296
  11. Isayev, A. I., 1987, Injection and Compression Molding fundamentals, Marcel-Dekker, New York.
  12. Ferry, J. D., 1989, Viscoelastic Properties of Polymers, John Wiley & Sons.
  13. Kim, S. M., Lee, W. I., Suh, K. Y., 2006, Evolution of transient meniscus in a wettable microchannel for Newtonian fluid, J. Micromech. Microeng. 16 2692-2696. https://doi.org/10.1088/0960-1317/16/12/023
  14. Brackbill, J. U., Kothe, D. B., Zemach, C., 1992, A continuum method for modeling surface tension, Journal of Computational Physics 100 334-354.
  15. Shim, H. S., Hong, J. S., Kim, S. W., Kim, S. K., 2013, Investigation of filling characteristics in micro-injection molding process, KSMTE Autumn Conference 2013 361-361.
  16. Park, S. H., Cho, N. J., Yoo, H. M., Kim, S. H., Kim, S. K., Cho, S. J., Lee, W. I., 2013, Measuring of Resin Viscosity for Injection Molding Analysis by using Capillary Die Mold, KSMTE Autumn Conference 2013 47-47.

피인용 문헌

  1. Numerical Analysis of Resin Filling Process for a Molded Dry-type Potential Transformer vol.17, pp.12, 2016, https://doi.org/10.5762/KAIS.2016.17.12.511