참고문헌
- Yeo, T. I., 1998, Finite Element Analysis of Thermoelastic Contact Stability with Sliding Friction, Trans. of the KSME(A) 22:7 1185-1192.
- Kim, C. K., Sung, B. Y., 1998, Thermal Behavior Analysis of Disk Brake System During Quick Braking, Trans. of the KSME(A) 22 1106-1113.
- Rainbolt, J. D., 1975, Effects of Disk Material Selection on Disk Brake Rotor Configuration, SAE 750733 1973-1814.
- Anderson, A. E., Knapp, R. A., 1989, Hot Spotting in Automotive Friction Systems, Int. Conf. on Wear of Materials 2 673-680.
- Jimbo, Y., Mibe, T., Akiyama, K., Matsui, H., Yoshida, M., Ozawa, A., 1990, Development of High Thermal Conductivity Cast Iron for Brake Disk Rotors, SAE 750733 22-28.
- Lee, B., Cho, C., Lee, S., Cho, H., 2004, Computer Simulation on Mechanical Evaluation of Ceramic Matrix Composite Automobile Brake Disks, PacRim 5 Special Issue 5:112 S423-S427.
- Lee, S. K., Sung, B. Y., Ha, S. K., 2000, Optimal Design of Ventilated Disc Brake Rotor, Trans. of the KSME(A) 24:3 593-602.
- Zagrodzki, P., Lam, K. B., AlBahkali, E. J., Barber, R., 2001, Nonlinear Transient Behavior of a Sliding System with frictionally excited Thermoelastic Instability, ASME J. Tribol. 123 699-708. https://doi.org/10.1115/1.1353180
- Kim, C. K., Sung, B. Y., 1998, Thermal Behavior Analysis of Disc Brake System during Quick Braking, Trans. of the KSME(A) 22:6 1106-1113.
- Kim, S. M., 2009, A Study on Thermal Analysis in Ventilated Disk Brake by FEM, Korea Society of Manufacturing Technology Engineers 18:5 544-549.
- Kim, S. T., Kim, J. H., Kim, J. S., 2005, A Study on Temperature Distribution of Disc Brake System Considering the Material Property of the Disc Brake Piston, Korea Society of Manufacturing Technology Engineers 14:6 45-51.
- Kim, C. K., Hwang, J. T., 1999, Tribological Analysis on The Contact Behaviors of Disc Brake Due to Frictional Heating, Journal of KSTLE 15:2 199-205.
- Lee, T. H., Lee, K. K., Jeong, S. J., 2001, Optimal Design for the Thermal Deformation of Disk Brake by using Design of Experiments and Finite Element Analysis, Trans. of the KSME(A) 25:12 1960-1965.
- Limpert, R. 1992, Brake Design and Safety, Society of Automative Engineers Inc. 89-133.
- Kao, T., Richmond, J. W., Douarre, A., 2000, Brake Disc hot Spotting and Thermal Judder: an Experimental and Finite Element Study, Int. Journal of Vehicle Design 23 276-296. https://doi.org/10.1504/IJVD.2000.001896
피인용 문헌
- 회전을 고려한 브레이크 디스크의 마찰열전달 연구 vol.18, pp.10, 2014, https://doi.org/10.5762/kais.2017.18.10.817
- 디스크 브레이크와 패드의 마찰열에 의한 열적거동에 관한 연구 vol.10, pp.12, 2014, https://doi.org/10.15207/jkcs.2019.10.12.287
- 디스크 브레이크와 패드의 마찰열에 의한 열적거동에 관한 연구 vol.10, pp.12, 2014, https://doi.org/10.15207/jkcs.2019.10.12.287