References
- Kim, S. W, "Latest Technology Trend of Cell Phone Camera Module," The Optical Journal, Vol. 138, pp. 22-25, 2012.
- Lee, S. J. and Hyun, D. H., "A Study of Influence of Parameters and Characteristics in the Injection Process on the Birefringence and Refractive Index for Pickup Lens," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 16, No. 6, pp. 21-28, 2007.
- Kwak, T. S. and Ohmori, H., "Verification for Transcription of Spherical Radius and Prediction of Birefringence in Injection Molding Optical Lens," J. Korean Soc. Precis. Eng., Vol. 22, No. 6, pp. 55-60, 2005.
- Jun, Y. T. and Hyun, D. H., "A Study Birefringence of Injection Molding for Plastics Aspheric Lens," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 15, No. 1, pp. 108-112, 2006.
- Lee, K. S. and Lin, J. C., "Design of the Runner and Gating System Parameters for a Multi-cavity Injection Mould using FEM and Neural Network," International Journal of Advanced Manufacturing and Technology, Vol. 27, No. 11-12, pp.1089-1096, 2006. https://doi.org/10.1007/s00170-004-2287-0
- Sasaki, T., Koga, N., Shirai, K, Kobayashi, Y., and Toyoshima, A., "An Experimental Study on Ejection Forces of Injection Molding," Precision Engineering, Vol. 24, No. 3, pp. 270-273, 2000. https://doi.org/10.1016/S0141-6359(99)00039-2
- Lu, X. and Khim, L. S., "A Statistical Experimental Study of the Injection Molding of Optical Lenses," Journal of Materials Processing Technology, Vol. 113, No. 1, pp. 189-195, 2001. https://doi.org/10.1016/S0924-0136(01)00606-9
- Tsai, K. M., Hsieh, C. H., and Lo, W. C., "A Study of the Effects of Process Parameters for Injection Molding on Surface Quality of Optical Lenses," Journal of Materials Processing Technology, Vol. 209, No. 7, pp. 3469-3477, 2009. https://doi.org/10.1016/j.jmatprotec.2008.08.006
- Kim, J. M. and Lyu, M. Y., "An Application of CAE in the Optimization of Runner Size in Injection Molding," Transactions of Materials Processing, Vol. 15, No. 5, pp. 347-353, 2006. https://doi.org/10.5228/KSPP.2006.15.5.347
- Cho, S. W., Kim, J. S., Yoon, K. H., and Kim, J. D., "An Experimental Study of Injection Molding for Multi-beam Sensing Lens using the Change of Gate Geometry," Transaction of Materials Processing, Vol. 20, No. 5, pp. 333-338, 2011. https://doi.org/10.5228/KSTP.2011.20.5.333
Cited by
- Development of Injection Mold for Subminiature Lenses Using Shell Runners Containing Multiple Holes vol.32, pp.11, 2015, https://doi.org/10.7736/KSPE.2015.32.11.961
- Design and Analysis of Shell Runners to Improve Cooling Efficiency in Injection Molding of Subminiature Lens vol.39, pp.10, 2015, https://doi.org/10.3795/KSME-A.2015.39.10.1021