DOI QR코드

DOI QR Code

다상 DC-DC 컨버터의 입력 전류 리플 저감 제어 알고리즘

Input Current Ripple Reduction Algorithm for Interleaved DC-DC Converter

  • Joo, Dong-Myoung (College of Information and Communication Eng., Sungkyunkwan Univ.) ;
  • Kim, Dong-Hee (College of Information and Communication Eng., Sungkyunkwan Univ.) ;
  • Lee, Byoung-Kuk (College of Information and Communication Eng., Sungkyunkwan Univ.)
  • 투고 : 2013.10.14
  • 심사 : 2014.02.14
  • 발행 : 2014.06.20

초록

Input current ripple and harmonic components of the power device are main causes of electromagnetic interference (EMI). Although the discontinuous conduction mode (DCM) operation can reduce harmonic components of the power device by reducing reverse recovery current of diode and turn-off voltage spikes of the switch, input current ripple increases due to high peak to peak inductor current. Therefore, in this paper, frequency control algorithm is proposed to reduce the input current ripple of DCM operated interleaved boost converter. In the proposed algorithm, duty ratio is fixed either 0.33 or 0.67 to minimize the input current ripple and the switching frequency is controlled according to operating conditions. 600 W 3-phase interleaved boost converter prototype system is built to verify proposed algorithm.

키워드

참고문헌

  1. M. Rogol, S. Doi, and A. Wilkinson, "Sun screen: Investment opportunities in solar power," Solar Power Sector Outlook, CLSA Asia-Pacific Markets, Jul. 2004.
  2. D. H. Kim, G. Y. Choi, J. S. Kim, B. K. Lee, "DCM analysis of interleaved boost converter for fuel cell applications," KIEE Trans., Vol. 59, No. 1, pp. 88-95, 2010.
  3. N.K. Poon, J.C.P. Liu, C.K. Tse, and M.H. Pong, "Techniques for input ripple current cancellation: classification and implementation," IEEE Trans. Power Electron., Vol. 15, No. 6, pp. 1144-1152, Nov. 2000. https://doi.org/10.1109/63.892829
  4. Leu, C.-S., Nha, Q. T, "A half-bridge converter with input current ripple reduction for DC distribution systems," IEEE Trans. Power Electron., Vol. 28, No. 4, pp. 1756-1763, Apr. 2013. https://doi.org/10.1109/TPEL.2012.2213269
  5. Rosas-Caro, J.C., Mancilla-David, F., Mayo-Maldonado, J.C., Gonzalez-Lopez, J.M., Torres-Espinosa, H.L., Valdez-Resendiz, J.E., "A transformer-less high-gain boost converter with input current ripple cancelation at a selectable duty cycle," IEEE Trans. Power Electron., Vol. 60, No. 10, pp. 4492-4499, Nov. 2013.
  6. Birca-Galateanu, S., "Double DC-DC converters with low input current ripple," IEEE 31 st Power Electronics Specialists Conference, Vol. 2, pp. 837-842, Galway, 2000.
  7. Wang, J., Dunford, W.G., Mauch, K., "Analysis of a ripple-free input-current boost converter with discontinuous conduction characteristics," IEEE Trans. Power Electron., Vol. 12, No. 4, pp. 684-694, Nov. 1997. https://doi.org/10.1109/63.602564
  8. A. Radic, A. Prodic, "Buck converter with merged active charge-controlled capacitive attenuation," IEEE Trans. Power Electron., Vol. 27, No. 3, pp. 1049-1054, Mar. 2012. https://doi.org/10.1109/TPEL.2011.2171370
  9. Texas instruments, "Ringing reduction techniques for NexFET TM high performance MOSFETs," TI Application Report, Nov. 2011.
  10. Daniel W. Hart, "Introduction to power electronics," Prentice Hall, 1997.
  11. ChangSung Corporation, "Magnetic Powder Cores," Ver. 1.3, pp. 43, 2013.

피인용 문헌

  1. Bi-Directional Interleaved Current-Fed Resonant Converter with Reduced Sized of Output Filter for FCEV vol.19, pp.6, 2014, https://doi.org/10.6113/TKPE.2014.19.6.503