DOI QR코드

DOI QR Code

Coercivity of Hot-pressed Compacts of Nd-Fe-B-type HDDR-treated Powder

  • Abdul Matin, Md. (Department of Materials Science and Engineering, Pukyong National University) ;
  • Kwon, Hae-Woong (Department of Materials Science and Engineering, Pukyong National University) ;
  • Lee, Jung-Goo (Korea Institute of Materials Science (KIMS)) ;
  • Yu, Ji-Hun (Korea Institute of Materials Science (KIMS))
  • 투고 : 2014.02.14
  • 심사 : 2014.04.02
  • 발행 : 2014.06.30

초록

$Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ HDDR-treated powder was compacted by hot-pressing using different configurations of dies and heating rates. The die configurations were especially different in terms of the evacuation system that was used in heating for hot-pressing. The coercivity in the compacts was influenced by the evacuation system of the die and heating rate. In spite of the identical hot-pressing temperature and heating rate, coercivity was radically reduced above $600^{\circ}C$ in the compacts prepared in the closed-type die compared to that in the compacts prepared in the open-type die. The coercivity in the compacts prepared in the closed-type die decreased with increasing heating rate and the value further increased when extreme high heating rate was employed. $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ HDDR-treated powder contained a significant amount of residual hydrogen (approx. 1500 ppm) in the form of $Nd_2Fe_{14}BH_x$ hydride. The dramatic coercivity decrease in the compact prepared in the closed die is attributed to the disproportionation of $Nd_2Fe_{14}BH_x$ hydride. High coercivity is mainly due to the effective desorption of hydrogen or the suppression of hydrogen-related disproportionation upon hot-pressing.

키워드

참고문헌

  1. T. Takeshita and R. Nakayama, Proc. 10th International Workshop on Rare Earth Magnets and Their Applications, Kyoto, Japan, 551 (1989).
  2. P. J. McGuiness, X. J. Zhang, X. J. Yin, and I. R. Harris, Less-Common Met. 158, 359 (1990). https://doi.org/10.1016/0022-5088(90)90071-Q
  3. T. Takeshita, J. Alloys Compd. 231, 51 (1995). https://doi.org/10.1016/0925-8388(95)01873-5
  4. W. F. Li, T. Ohkubo, K. Hono, T. Nishiuchi, and S. Hirosawa, Appl. Phys. Lett. 93, 052505 (2008). https://doi.org/10.1063/1.2969416
  5. O. M. Ragg, I. R. Harris, H. Nagel, and P. Bohm, IEEE Trans. Magn. 32, 4395 (1996). https://doi.org/10.1109/20.538880
  6. S. Liesert, A. Kirchner, W. Grunberger, A. Handstein, P. De Rango, D. Fruchart, L. Schultz, and K. H. Muller, J. Alloys Compd. 266, 260 (1998). https://doi.org/10.1016/S0925-8388(97)00439-8
  7. K. Morimoto, E. Niizuma, K. Igarashi, K. Mori, M. Watanabe, and R. Nakayama, J. Magn. Magn. Mater. 265, 345 (2003). https://doi.org/10.1016/S0304-8853(03)00286-5
  8. N. Nozawa, H. Sepehri-Amin, T. Ohkubo, K. Hono, T. Nishiuchi, and S. Hirosawa, J. Magn. Magn. Mater. 323, 115 (2011). https://doi.org/10.1016/j.jmmm.2010.08.043
  9. Md. Abdul Matin, Hae-Woong Kwon, Jung-Goo Lee, Ji-HunYu, Tae Hoon Kim, and Cheol-Woong Yang, IEEE Trans. Magn. 49, 3398 (2013). https://doi.org/10.1109/TMAG.2013.2243118
  10. M. A. Matin, H. W. Kwon, J. G. Lee, and J. H. Yu, IEEE Trans. Magn. 50, 2100504 (2014).
  11. D. Book, I. R Harris, A. Manaf, I. Ahmad, and H. A. Davies, J. Alloys Compd. 221, 180 (1995). https://doi.org/10.1016/0925-8388(94)01432-9
  12. H. W. Kwon and J. H. Yu, J. Alloys Compd. 487, 138 (2009). https://doi.org/10.1016/j.jallcom.2009.07.173

피인용 문헌

  1. Effect of Grain Boundary Modification on the Microstructure and Magnetic Properties of HDDR-treated Nd-Fe-B Powders vol.21, pp.1, 2016, https://doi.org/10.4283/JMAG.2016.21.1.051