Journal of international Conference on Electrical Machines and Systems

Journal of International Conference on Electrical Machines and Systems (대한전기학회 분과)
권호 표지
DOI QR코드

DOI QR Code

Practical Design Considerations for Large PM Machines

  • Qu, Ronghai (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology) ;
  • Zhang, Xiaolong (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronic Engineering, Huazhong University of Science and Technology)
  • Received : 2013.08.15
  • Accepted : 2013.10.10
  • Published : 2014.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

To help machine designers to make precise design of large permanent magnet (PM) machines, this paper presents a set of design considerations that are very often ignored by machine designers. These considerations are categorized into several aspects: electromagnetic (EM) performance, losses and efficiency, fault and stability, and some other issues. The effects of various practical factors are presented and some corresponding design methods are introduced.

Keywords

References

  1. T. M. Jahns, "The expanding role of PM machines in directdrive applications", in Proc. of 2011 Intl. Conference on Electric Machines and Systems (ICEMS'11), Beijing, China, Aug. 2011.
  2. D. Guannan, W. Haifeng, G. Hui and G. Guobiao, "Direct drive permanent magnet wind generator design and electromagnetic field finite element analysis," IEEE Transactions on Applied Superconductivity, vol.20, pp. 1883-1887, 2010. https://doi.org/10.1109/TASC.2009.2039993
  3. S. Kuznetsov, "Machine design and configuration of a 7000 HP hybrid electric drive for naval ship propulsion," in Proc. 2011 Electric Machines & Drives Conference (IEMDC), pp. 1625-1628.
  4. Germishuizen, J.J. and M.J. Kamper, "IPM traction machine with single layer non-overlapping concentrated windings," IEEE Transactions on Industry Applications, vol. 45, no. 4, pp. 1387-1394, 2009. https://doi.org/10.1109/TIA.2009.2023500
  5. J.R. Hendershot Jr., "The miller, design of brushless permanent-magnet motors," Magna Physics Publishing and Oxford University Press, 1994.
  6. X. H. Wang, "Permanent magnet machines", China Electric Power Press, 2011.
  7. H. Fukunaga, S. Narikiyo, H. Koreeda, T. Yanai, M. Nakano and F. Yamashita, "A method for predicting flux loss of multipole magnet and its evaluation," IEEE Transactions on Magnetics, vol.47, pp. 4108-4111, 2011. https://doi.org/10.1109/TMAG.2011.2158195
  8. H. F. Mildrum and G. M. Umana, "Elevated temperature behavior of sintered Nd-Fe-B type magnets," IEEE Transactions on Magnetics, vol.24, pp. 1623-1625, 1988. https://doi.org/10.1109/20.11550
  9. T. A. Lipo, "Introduction to AC machine design, wisconsin power electronics research center," University of Wisconsin, Madison, WI, 1996.
  10. Z. Q. Zhu and D. Howe, "Winding inductances of brushless machines with surface-mounted magnets," in Proc. 1997 Electric Machines and Drives Conference Record, 1997.
  11. Dorrell, D.G., H. Min-Fu and G. YouGuang, Unbalanced Magnet Pull in Large Brushless Rare-Earth Permanent Magnet Motors With Rotor Eccentricity. Magnetics, IEEE Transactions on, 2009. 45(10): p. 4586-4589. https://doi.org/10.1109/TMAG.2009.2022338
  12. Sun-Kwon, L., K. Gyu-Hong and H. Jin, "Analysis of radial forces in 100kW IPM machines for ship considering stator and rotor eccentricity," in IEEE 8th International Conference on Power Electronics and ECCE Asia,(ICPE & ECCE), 2011.
  13. Jongman, H., et al., "Detection and classification of rotor demagnetization and eccentricity faults for PM synchronous Motors," IEEE Transactions on Industry Applications, vol 48, no. 3, pp. 923-932, 2012. https://doi.org/10.1109/TIA.2012.2191253
  14. Y. Q. Tang, "Electromagnetic field in electrical machines," Science Press, 1998.
  15. Seok-Hee, H., et al., "Reducing harmonic eddy-current losses in the stator teeth of interior permanent magnet synchronous machines during flux weakening," IEEE Transactions on Energy Conversion, vol. 25, no. 2, pp. 441-449 2010. https://doi.org/10.1109/TEC.2009.2033195
  16. Tangudu, J.K., T.M. Jahns and A. EL-Refaie, "Core loss prediction using magnetic circuit model for fractional-slot concentrated-winding interior permanent magnet machines," in Proceeding on Energy Conversion Congress and Exposition (ECCE), 2010.
  17. K. Atallah, D. Howe, P. H. Mellor and D. A. Stone, "Rotor loss in permanent magnet brushless AC machines," in Proc. 1999 Electric Machines and Drives, pp. 60-62, 1999.
  18. H. P. Liu, C. S. Hearn, M. D. Werst, J. J. Hahne and D. Bogard, "Splits of windage losses in integrated transient rotor and stator thermal analysis of a high-speed alternator during multiple discharges," IEEE Transactions on Magnetics, vol.41, pp. 311-315, 2005. https://doi.org/10.1109/TMAG.2004.839294
  19. J. J. Hahne, M. D. Werst, C. E. Penney, H-P. Liu, and D. Bogard, "Measurement of windage losses and temperature distribution for a high speed composite rotor in a stator assembly at low air pressures," in Proceeding on 2003 ASME Summer Heat Transfer Conference, Las Vegas, Nevada, July 20-23, 2003.
  20. H. P. Liu, M. D. Werst, J. J. Hahne, and D. Bogard, "Prediction of windage losses of an enclosed high speed composite rotor in low air pressure environments," 2003 ASME Summer Heat Transfer Conference, Las Vegas, Nevada, July 20-23, 2003.
  21. P. D. Pfister and Y. Perriard, "Very-high-speed slotless permanent-magnet motors: analytical modeling, optimization, design, and torque measurement methods," IEEE Transactions on Industrial Electronics, vol.57, pp. 296-303, 2010. https://doi.org/10.1109/TIE.2009.2027919
  22. Franklin, R.F., "Short-circuit currents of synchronous machines," Transactions of the American Institute of Electrical Engineers, pp. 420-435 1925.
  23. Welchko, B.A., et al., "IPM synchronous machine drive response to symmetrical and asymmetrical short circuit faults," IEEE Transactions on Energy Conversion, vol. 18, nol 2, pp. 291-298, 2003. https://doi.org/10.1109/TEC.2003.811746
  24. Chu, W.Q. and Z.Q. Zhu, "Analytical modeling and investigation of transient response of PM machines with 3-phase short-circuit fault," in IEEE International Conference on Electric Machines & Drives (IEMDC), 2011.
  25. Gandhi, A., T. Corrigan and L. Parsa, "Recent advances in modeling and online detection of stator interturn faults in electrical motors," IEEE Transactions on Industrial Electronics, vol. 58, no. 5, pp. 1564-1575, 2011. https://doi.org/10.1109/TIE.2010.2089937
  26. Zhigang, S., et al., "Analytical prediction of the short-circuit current in fault-tolerant permanent-magnet machines," IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4210-4217, 2008. https://doi.org/10.1109/TIE.2008.2005019
  27. Noel, C., N. Takorabet and F. Meibody-Tabar, "Short-circuit current reduction technique for surface mounted PM machines high torque-low speed applications," in Industry Applications Conference, 39th IAS Annual Meeting, 2004.
  28. Xia, Z.P., et al, "Comparison of radial vibration forces in 10-pole/12-slot fractional slot surface-mounted and interior PM brushless AC machines," in 2010 International Conference on Electrical Machines (ICEM), 2010.
  29. Krotsch, J. and B. Piepenbreier, "Radial forces in external rotor permanent magnet synchronous motors with nonoverlapping windings," IEEE Transactions on Industrial Electronics, vol. 59, no. 5, pp. 2267-2276, 2012.
  30. Ki-Chan, K., et al., "The shape design of permanent magnet for permanent magnet synchronous motor considering partial demagnetization," IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3485-3487, 2006. https://doi.org/10.1109/TMAG.2006.879077
  31. Guoxin, Z., et al, "Demagnetization analysis of permanent magnet synchronous machines under short circuit fault, in Power and Energy Engineering Conference (APPEEC), 2010.
  32. Rosu, M., J. Saitz and A. Arkkio, "Hysteresis model for finite-element analysis of permanent-magnet demagnetization in a large synchronous motor under a fault condition," IEEE Transactions on Magnetics, vol. 41, no. 6, pp. 2118-2123, 2005. https://doi.org/10.1109/TMAG.2005.848319