대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제38권6호
  • /
  • Pages.443-449
  • /
  • 2014
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

열분포를 고려한 열음향 모델의 개선

Improved Thermoacoustic Model Considering Heat Release Distribution

  • Kim, Daesik (School of Mechanical and Automotive Engineering, Gangneung-Wonju Nat'l Univ.,) ;
  • Kim, Kyu Tae (GE Global Research Center)
  • 투고 : 2013.11.28
  • 심사 : 2014.03.18
  • 발행 : 2014.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

가스터빈 희박 예혼합 연소기에서 발생하는 연소 불안정 현상을 예측하기 위하여 열음향 해석 기법이 폭넓게 사용되고 있다. 그러나 이러한 모델들은 전체 연소기 시스템과 화염의 형상을 과도하게 단순화함으로써, 모델 정확도에 한계를 드러내왔다. 본 연구에서는 두 가지 측면에서 열음향 모델의 정확도를 개선하고자 하는 노력을 시도하였다. 우선 화염의 위치를 연소기 입구가 아닌 실제 계측 결과를 반영할 수 있도록 열음향 모델을 수정하였으며, 두 번째로는 열 발생 위치가 얇은 화염의 형태가 아닌, 실제 화염의 형상과 같이 열 분포 현상을 반영할 수 있도록 하였다. 모델 수정 결과 기존의 열음향 모델 대비, 불안정 현상의 성장률을 예측하는데 있어서 오차가 줄어드는 것으로 나타났다.

Thermoacoustic (TA) models have been widely used to predict combustion instability characteristics in a gas turbine lean premixed combustor. However, these techniques have shown some limitations in improving the model accuracy related to an over-simplification of the combustion system and flame geometry. Efforts were made in the current study to improve the limitations of the TA models. One strategy was to modify the actual flame location in the model, and another was to consider the heat release distribution through the flames. The modified TA model results show better accuracy in predicting the growth rate of instabilities compared with the previous results.

키워드

참고문헌

  1. Kim, D., 2011, "Introduction to Flame Transfer Function in a Lean Premixed Gas Turbine Combustor," Trans. Korean Soc. Mech. Eng. B, Vol. 35, No. 9, pp. 975-979. https://doi.org/10.3795/KSME-B.2011.35.9.975
  2. Kim, D., 2012, "Linear Stability Analysis in a Gas Turbine Combustor using Thermoacoustic Models," Journal of the Korean Society of Combustion, Vol. 17, No. 2, pp. 17-23.
  3. Kim, D. and Kim, K., 2012, "Thermoacoustic Analysis Model for Combustion Instability Prediction - Part 1 : Linear Instability Analysis," Journal of the Korean Society of Propulsion, Vol. 16, No. 6, pp. 32-40. https://doi.org/10.6108/KSPE.2012.16.6.032
  4. Kim, D., "Combustion Istability Measurements in a Lab-Scale Gas Turbine Combustor and Linear Thermoacoustic Model Development," Procedeeings of 1st KOSCO Workshop, pp.231-242, 2011.
  5. Kim, D. and Kim, K., 2013, "Thermoacoustic Analysis Considering Flame Location in a Gas Turbine Combustor," Journal of the Korean Society of Combustion, Vol. 18, No. 2, pp. 1-6.
  6. Lieuwen, T., 2003, "Introduction: Combustion Dynamics in Lean-Premixed Prevaporized (LPP) Gas Turbines," Journal of Propulsion and Power, Vol. 19, No. 5, pp. 721. https://doi.org/10.2514/2.6171
  7. Truffin, K. and Poinsot, T., 2005, "Comparison and Extension of Methods for Acoustic Identification of Burners," Combustion and Flame, Vol. 142, No. 4, pp. 388-400. https://doi.org/10.1016/j.combustflame.2005.04.001
  8. Poinsot, T. and Veynante, D., 2005, "Theoretical and Numerical Combustion," 2nd ed., Edwards, Philadelphia, pp. 375-430.
  9. Kim, K., Lee, J., Quay, B. and Santavicca, D., 2010, "Spatially Distributed Flame Transfer Functions for Predicting Combustion Dynamics in Lean Premixed Gas Turbine Combustors," Combustion and Flame, Vol. 157, No. 9, pp. 1718-1730. https://doi.org/10.1016/j.combustflame.2010.04.016
  10. Kim, K., 2009, "Forced Response of Swirl Stabilized Flames in Hydrogen Enriched Gas Turbines," Ph.D. Dissertation, Pennsylvania State University.
  11. Kim, D., Lee, J., Quay, B., Santavicca, D., Kim, K. and Srinivasan, S., 2010, "Effect of Flame Structure on the Flame Transfer Function in a Premixed Gas Turbine Combustor," Journal of Engineering for Gas Turbine and Power, Vol. 132, No. 2, 021502. https://doi.org/10.1115/1.3124664
  12. Cheung, W., Sims, G., Coppleston, R., Tilston, J., Wilson, C., Stow, S. and Dowling, A., 2003, "Measurement and Analysis of Flame Transfer Function in a Sector Combustor under High Pressure Conditions," Proceedings of ASME Turbo Expo, GT2003-38219
  13. Kato, S., Fujimori, T., Dowling, A. and Kobayashi, H., 2005, "Effect of Heat Release Distribution on Combustion Oscillation," Proceedings of the Combustion Institute, Vol. 30, pp. 1799-1806. https://doi.org/10.1016/j.proci.2004.08.154
  14. Sattelmayer, T., 2003, "Influence of the Combustor Aerodynamics on Combustion Instabilities from Equivalence Ratio Fluctuations," Journal of Engineering for Gas Turbines and Power, Vol. 125, No. 1, pp.11-19. https://doi.org/10.1115/1.1365159